Отразить зеркально
Зеркальное отражение |
Системное название |
---|
Part Mirror |
Расположение в меню |
Деталь -> Зеркальное отражение... |
Верстаки |
Part, Complete |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Introduction
'Mirror Object' - This tool creates a new object (image) which is a reflection of the original object (source). The image object is created behind a mirror plane. The mirror plane may be standard plane (XY, YZ, or XZ), or any plane parallel to a standard plane.
Пример:
Usage
Select the source object from the list. Select a standard Mirror plane from the dropbox. Press OK to create the image object.
Options
The Base point boxes can be used to move the mirror plane parallel to the selected standard mirror plane. Only one of the X, Y, or Z boxes is effective for a given standard plane.
Standard Plane | Base Point Box | Effect |
---|---|---|
XY | Z | Move mirror plane along Z axis. |
XY | X, Y | No effect. |
XZ | Y | Move mirror plane along Y axis. |
XZ | X, Z | No effect. |
YZ | X | Move mirror plane along X axis. |
YZ | Y, Z | No effect. |
Limitations
- Arbitrary mirror planes (ie not parallel to a standard plane) are not supported (as of FC version 0.13).
Part
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub