Part Mirror/de: Difference between revisions
(Updating to match new version of source page) |
Renatorivo (talk | contribs) No edit summary |
||
Line 1: | Line 1: | ||
{{GuiCommand|Name=Part Mirror|MenuLocation=Part -> Mirror|Workbenches=[[Part Workbench|Part]], |
{{GuiCommand/de|Name=Part Mirror|Name/de=Part Mirror|MenuLocation=Part -> Mirror|Workbenches=[[Part Workbench/de|Part]], Complete|SeeAlso=}} |
||
==Introduction== |
==Introduction== |
Revision as of 21:59, 3 March 2016
Part Mirror |
Menüeintrag |
---|
Part -> Mirror |
Arbeitsbereich |
Part, Complete |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Keiner |
Introduction
'Mirror Object' - This tool creates a new object (image) which is a reflection of the original object (source). The image object is created behind a mirror plane. The mirror plane may be standard plane (XY, YZ, or XZ), or any plane parallel to a standard plane.
An example:
Usage
Select the source object from the list. Select a standard Mirror plane from the dropbox. Press OK to create the image object.
Options
The Base point boxes can be used to move the mirror plane parallel to the selected standard miror plane. Only one of the X, Y, or Z boxes is effective for a given standard plane.
Standard Plane | Base Point Box | Effect |
---|---|---|
XY | Z | Move mirror plane along Z axis. |
XY | X, Y | No effect. |
XZ | Y | Move mirror plane along Y axis. |
XZ | X, Z | No effect. |
YZ | X | Move mirror plane along X axis. |
YZ | Y, Z | No effect. |
Limitations
- Arbitrary mirror planes (ie not parallel to a standard plane) are not supported (as of FC version 0.13).