Part: Elice/Helix

From FreeCAD Documentation
Revision as of 15:14, 18 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Part Elice

poziția meniului
Part → Create Primitives → Helix
Ateliere
Part, OpenSCAD
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
nici unul

Descriere

Un element primitiv geometric este Elicea care este disponibilă din dialogul Create Primitives în Atelierul de lucru Part.

A common usage for the Helix is for creating Threads (see Thread for Screw Tutorial) in conjunction with the Part Sweep operation.

Cum se folosește

The Create Primitives dialogue can be accessed via the CreatePrimitives icon located in the Part menu or the Part toolbar, in the Part Workbench. A common usage for the Helix is for threads in conjunction with the sweep operation.

Sub Windows "Elica"

|

Sub Linux "Helix"

Parametrii

  • Pitch: Pasul corespunde spațiului dintre două "întoarceri" consecutive ale spiralei măsurate de-a lungul axei principale a spiralei.
  • Height: The height corresponds to the overall height of the helix measured along the main axis of the helix.
  • Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom.
  • Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay conus. This angle corresponds to the angle of the conus. The value must be comprised between 0 and +90 deg.
  • Right-handed or Left-handed: This parameter specifies the handedness of the helix.

Location

  • X: The main axis of the helix will be translated along the x axis of the value you indicate in this field.
  • Y: The main axis of the helix will be translated along the y axis of the value you indicate in this field.
  • Z: The main axis of the helix will be translated along the z axis of the value you indicate in this field.
  • Direction: Per default the main axis of the helix is the z axis. Here you have the possibility to edit the main axis of the helix. If you select the parameter "user defined..." , you will be invited to indicate the main axis of the helix by entering the coordinates of its vector.
  • 3D View: vă permite să selectați centrul în vizualizarea 3D

Opțiuni

Properties

Odată ce ați creat elicea, aveți opțiunea de a modifica parametrii.

The parameters in this menu are similar to those described above.
Base

  • Placement: allows you to move or rotate the helix
  • Angle: