From FreeCAD Documentation
Geometric Primitives
This page explains you, how to edit basic parameters of an helix.
|
Helix
Parameter
- Pitch:The pitch corresponds to the space between two consecutive "turns" of the helix measured along the main axis of the helix.
- Height: The height corresponds to the overall height of the helix measured along the main axis of the helix.
- Radius: The radius corresponds to the radius of the circle built by the helix by viewing the helix from the top / bottom.
- Angle: Per default the helix is built on a imaginary cylinder. With this option it is possible to build the helix on a imaginay conus. This angle corresponds to the angle of the conus. The value must be comprised between -90 deg and +90 deg.
- Right-handed or Left-handed: This parameter specifies the handedness of the helix.
Location
|
Property
|
View
..
Data
Base
- DatiLabel:
- DatiPlacement:
Coordinate ...
Helix
- DatiAngle :
- DatiHeight :
- DatiPitch :
- DatiRadius :
|