Part: Unisci

From FreeCAD Documentation
Revision as of 20:52, 17 October 2014 by Renatorivo (talk | contribs)

Unione

Posizione nel menu
Part → Unione
Ambiente
Parte, Completo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Sottrazione, Intersezione

Il comando fonde gli oggetti Parte selezionati in uno solo.

Questa operazione è completamente parametrica e le componenti possono essere modificate e il risultato ricalcolato.

Pulire la forma

L'oggetto prodotto dalla fusione di più oggetti può contenere delle linee superflue che derivano dalle forme originali, per ripulirlo, si può:

  • utilizzare il comando Parte → Affinare una forma
  • utilizzare il comando Affina Forma di OpenScad, oppure
  • per ottenere subito una forma pulita e non dover ricorrere a questo comando, attivare la voce Affina automaticamente il modello... nelle preferenze

This command allows you to perform quickly this Boolean operation.

How to use

  1. Select two or more shapes
  2. Press the Part Fuse button.

Options

Items can be added and removed from the Fuse, by dragging them in or out of the Fuse feature in the treeview, with the mouse. A manual recompute (press F5 key or click on the recompute icon) is required to see the results.

After this operation may be necessary to clean the shape with RefineShape