Part: Elipsoidul

From FreeCAD Documentation
Revision as of 09:41, 28 October 2018 by Luc (talk | contribs) (Created page with "Forma produsă este limitată în FreeCAD ca fiind un sferoid solid (opțional trunchiat), forma pe care ați crea-o prin rotirea unei elipse în jurul axei sale. Implicit est...")

Part Ellipsoid

Menu location
Part → Create Primitives → Ellipsoid
Workbenches
Part, OpenSCAD
Default shortcut
None
Introduced in version
-
See also
..

Descriere

Un solid parametric este Elipsoidul care este disponibil din dialogul Create Primitives în Atelierul de lucru Part.

Dialogul Create Primitives pote fi accesat via iconiței CreatePrimitives localizată în meniul Part sau Part toolbar, în Atelierul Part(Workbench).

Forma produsă este limitată în FreeCAD ca fiind un sferoid solid (opțional trunchiat), forma pe care ați crea-o prin rotirea unei elipse în jurul axei sale. Implicit este a oblate_spheroid, forma pe care ați crea-o prin rotirea unei elipse în jurul axei sale minore. Parametrii pot fi modificați pentru a forma aprolate_spheroid.

The default spheroid in FreeCAD will have a circle for any cross section parallel to the xy plane. The cross section parallel to the other two planes will be an ellipse.

In mathematics, an Ellipsoid would have an elliptical cross section in all three planes.

Properties

  • Radius 1, by default the minor radius parallel to the Z-axis,
  • Radius 2, by default the major radius parallel to the XY plane, it is also the maximum radius of the circular cross section
  • Angle 1, lower truncation of the ellipsoid, parallel to the circular cross section (-90 degrees in a full spheroid)
  • Angle 2, upper truncation of the ellipsoid, parallel to the circular cross section (90 degrees in a full spheroid)
  • Angle 3, angle of rotation of the elliptical cross section (360 degrees in a full spheroid)