Part Cylinder/fr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "{{GuiCommand/fr|Name=Part_Cylinder|Name/fr=Cylindre|MenuLocation=Paramétrique → Cylindre|Workbenches=Atelier Pièce, Complet|SeeAlso= Cube,[[Part Cone/...")
Line 1: Line 1:
{{GuiCommand|Name=Part_Cylinder|MenuLocation=Part -> Cylinder||Workbenches=[[Part_Module|Part_Module]],Complete|SeeAlso=[[Part_CreatePrimitives|Part_CreatePrimitives]]}}
{{GuiCommand/fr|Name=Part_Cylinder|Name/fr=Cylindre|MenuLocation=Paramétrique Cylindre|Workbenches=[[Atelier Pièce]], Complet|SeeAlso=[[Part Box/fr | Cube]],[[Part Cone/fr | Cône]],[[Part Sphere/fr | Sphère]],[[Part Torus/fr | Tore]]}}





Revision as of 19:31, 20 February 2014

Cylindre

Emplacement du menu
Paramétrique → Cylindre
Ateliers
Atelier Pièce, Complet
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Cube, Cône, Sphère, Tore


Creates a simple parametric cylinder, with position, angle, radius and height parameters.

The default is for a full cylinder to be positioned, the centre of one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

The properties can later be edited in the data tab for the cylinder:

The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default).

The height is the distance in the z-axis.

The radius defines a plane in x-y.

a cylinder created with the Cylinder tool