Part Cut/sv: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 19: Line 19:
Cuts (subtracts) selected Part objects, the last one being subtracted from the first one. This operation is fully parametric and the components can be modified and the result recomputed.
Cuts (subtracts) selected Part objects, the last one being subtracted from the first one. This operation is fully parametric and the components can be modified and the result recomputed.


'''Note:''' This command is an automated form of the [[Image:Part_Booleans.svg|24px]] [[Part Booleans|Boolean operation]].
'''Note:''' This command is an automated form of the [[Image:Part_Booleans.svg|24px|link=Part_Booleans]] [[Part Booleans|Boolean operation]].


[[IMAGE:Part Cut 01.png|480px|left|Cut]]{{clear}}
[[IMAGE:Part Cut 01.png|480px|left|Cut]]{{clear}}
Line 27: Line 27:
# Select two shapes
# Select two shapes
# Invoke the Part Cut command several ways:
# Invoke the Part Cut command several ways:
#* Press the {{Button|[[Image:Part_Cut.svg|16px]] '''Cut'''}} button in the Part toolbar
#* Press the {{Button|[[Image:Part_Cut.svg|16px|link=Part_Cut]] '''Cut'''}} button in the Part toolbar
#* Use the {{MenuCommand|Part → Boolean → Cut}} entry from the Part menu
#* Use the {{MenuCommand|Part → Boolean → Cut}} entry from the Part menu


== Supported inputs ==
== Supported inputs ==


Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.
Input objects must be [[OpenCascade]] shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.


{{Docnav
{{Docnav
Line 43: Line 43:
}}
}}


{{Part Tools navi}}
{{Part Tools navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}

{{Userdocnavi}}

{{clear}}
{{clear}}

Revision as of 21:46, 25 February 2020

Part_Cut

Menyplacering
Part → Cut
Arbetsbänkar
Del,Komplett
Standard genväg
Ingen
Introducerad i version
-
Se även
Union, Common

Klipper (subtraherar) valda Del objekt, där den sista subtraheras från den första. Denna operation är helt parametrisk, så de ingående komponenterna kan förändras och resultatet beräknas om.

Cuts (subtracts) selected Part objects, the last one being subtracted from the first one. This operation is fully parametric and the components can be modified and the result recomputed.

Note: This command is an automated form of the Boolean operation.

Cut
Cut

Usage

  1. Select two shapes
  2. Invoke the Part Cut command several ways:
    • Press the Cut button in the Part toolbar
    • Use the Part → Boolean → Cut entry from the Part menu

Supported inputs

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.