Part Common/sv: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 1: Line 1:
<languages/>
<languages/>
{{Docnav
{{Docnav
|[[Part_Union|Union]]
|[[Part_Fuse|Fuse]]
|[[Part_CompJoinFeatures|CompJoinFeatures]]
|[[Part_Cut|Cut]]
|[[Part_Module|Part]]
|[[Part_Module|Part]]
|IconL=Part_Fuse.svg
|IconL=Part_Fuse.svg
|IconR=Part_CompJoinFeatures.png
|IconC=Workbench_Part.svg
|IconC=Workbench_Part.svg
|IconR=Part_Cut.svg
}}
}}


Line 24: Line 24:


Input objects must be [[OpenCascade]] shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.
Input objects must be [[OpenCascade]] shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.



{{Docnav
{{Docnav
|[[Part_Union|Union]]
|[[Part_Fuse|Fuse]]
|[[Part_CompJoinFeatures|CompJoinFeatures]]
|[[Part_Cut|Cut]]
|[[Part_Module|Part]]
|[[Part_Module|Part]]
|IconL=Part_Fuse.svg
|IconL=Part_Fuse.svg
|IconR=Part_CompJoinFeatures.png
|IconC=Workbench_Part.svg
|IconC=Workbench_Part.svg
|IconR=Part_Cut.svg
}}
}}



Revision as of 20:18, 1 December 2020

Part_Common

Menyplacering
Ingen
Arbetsbänkar
Del,Komplett
Standard genväg
Ingen
Introducerad i version
-
Se även
Ingen

Description

Tar ut den gemensamma delen (skärningen) mellan valda Del objekt. Denna operation är helt parametrisk så de ingående Del objekten kan förändras och så kommer det gemensamma att förändras när det beräknas om.

Usage

  1. Select two shapes
  2. Press the Common button.

Supported inputs

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.