Part Cercle

From FreeCAD Documentation
Revision as of 10:24, 3 March 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part Cercle

Emplacement du menu
Pièce → Créer des primitives → Cercle
Ateliers
Part
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

Cette commande va créer une ligne courbe circulaire. Avec les valeurs par défaut, la ligne circulaire sera fermée et sera donc un cercle. Si les propriétés Angle 0 ou Angle 1 sont modifiés par rapport aux valeurs par défaut (0 et 360), le bord sera une courbe ouverte ou arc.

A Part Circle is in fact a closed counterclockwise circular arc, it can be turned into an arc by changing its DonnéesAngle1 and/or DonnéesAngle2 properties.

Utilisation

See Part Primitives.

A Part Circle can alternatively be created by selecting three points:

  1. In the task panel of the Part Primitives command select the Circle option from the dropdown list.
  2. Press the From three points button.
  3. Select three vertices in the 3D view. There is no need to hold down the Ctrl key.
  4. A circle is created.
  5. The selected vertices are only used at creation time to calculate the DonnéesRadius and DonnéesPlacement of the circle.

Example

Part Circle from the scripting example

A Part Circle object created with the scripting example below is shown here.

Propriétés

See also: Property editor.

A Part Circle object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Base

  • Radius: Le rayon de la courbe ou du cercle (arc ou cercle)
  • Angle 0: Début de la courbe, (en degrés anti-horaire), la valeur par défaut est de 0°.
  • Angle 1: Fin de la courbe, (en degrés anti-horaire), la valeur par défaut est de 360°.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Circle can be created with the addObject() method of the document:

circle = FreeCAD.ActiveDocument.addObject("Part::Circle", "myCircle")
  • Where "myCircle" is the name for the object.
  • The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

circle = doc.addObject("Part::Circle", "myCircle")
circle.Radius = 10
circle.Angle1 = 45
circle.Angle2 = 225
circle.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(30, 45, 10))

doc.recompute()