Pieza ComprobarGeometría
Pieza ComprobarGeometría |
Ubicación en el Menú |
---|
Pieza → Comprobar geometría |
Entornos de trabajo |
Pieza |
Atajo de teclado por defecto |
Ninguno |
Introducido en versión |
- |
Ver también |
Ninguno |
Descripción
La herramienta Pieza ComprobarGeometría ejecuta una verificación e informa si la geometría es un sólido válido.
Utilización
- Seleccione una pieza (tenga cuidado de seleccionar toda la pieza y no sólo una cara para comprobar que el sólido es válido)
- Invocar la herramienta ya sea:
Resultados se informarán en el Panel de tareas.
Activar control BOP adicional
La función ComprobarGeometría comprueba si la Representación del límite (BRep o B-rep) del modelo es válida. Adicionalmente a esta comprobación de BRep, es posible tener una comprobación adicional de BOP (BOP= Boolean OPerations).
A partir de la versión 0.19 hay un panel de configuración en los resultados de ComprobarGeometría con una casilla de verificación para activar o desactivar esta opción. Para los usuarios de versiones anteriores, para activar la comprobación de la BOP siga estos pasos :
- Utilice el menú Tools → Edit parameters... → Preferences → Mod → Part → CheckGeometry
- En el panel derecho haz doble clic con el botón derecho en el parámetro RunBOPCheck para cambiar su valor a true.
- Haga clic en Save to disk, cierre y reinicie.
Ver la captura de pantalla de abajo.
If the parameter or folder does not exist, create it by:
- Right-clicking on Part and choosing Add sub-group
- Name the sub-group
CheckGeometry
- Make sure the feshly created sub-group
CheckGeometry
is selected - Right-clicking in the right (empty) window and choosing New Boolean Item
- Name the new Boolean item
RunBOPCheck
and make sure it is set to True - Press the Save to disk button
- Close and restart.
Run check and interpret results
- Select within the tree view one or more objects to check
- Press the CheckGeometry button.
- Result: A report will display on the left side of the screen showing the result of the scan (version 0.19 and above any errors found are also logged in the report view if logging is enabled in preferences)
- If the scan turned up errors: click in the report window on a specific error message and the corresponding geometric object (edge/face ...) will be highlighted in the 3D view
- Note: At the moment FreeCAD has no automatic repair methods for solids, so you need to look at the steps used in FreeCAD to model this specific geometry and try to fix the error yourself
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub