Part CheckGeometry/de: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 54: Line 54:


If ticked, any errors found are also logged in the [[Report_view|report view]]. {{Version|0.19}}
If ticked, any errors found are also logged in the [[Report_view|report view]]. {{Version|0.19}}

==Shape Content==

In addition to detecting potential geometry errors, this tool shows a range of properties regarding the selected object:
* Checked object
* Shape type
* Number of geometric entities: vertices, edges, wires, faces, shells, solids, compsolids, compounds, total shapes
* Geometric and mass properties:
** Area
** Volume
** Mass
** Length
** Center of mass
** Orientation
** Symmetry axis
** Symmetry point
** Moments
** First axis of inertia
** Second axis of inertia
** Third axis of inertia
** Radius of gyration
** Global placement





Revision as of 19:57, 10 March 2022

Part GeometriePrüfen

Menüeintrag
Formteil → Geometrie überprüfen
Arbeitsbereich
Part
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Beschreibung

Beschreibung

Das Part GeometriePrüfen Werkzeug führt eine Überprüfung durch und meldet, ob die Geometrie ein gültiger Körper ist.

Anwendung

  1. Wähle ein Teil aus (achte darauf, das gesamte Teil auszuwählen und nicht nur eine Fläche, um auf ein gültiges Volumenmodell zu prüfen)
  2. Rufe das Werkzeug auf, durch entweder:
    • Klicke auf die Schaltfläche, die in der Werkzeugleiste des Teil Arbeitsbereichs verfügbar ist.
    • Verwenden des Part → Geometrie prüfen Eintrags im oberen Menü.

Ergebnisse werden im Aufgabenpaneel aufgeführt.

Note: FreeCAD has no automatic repair methods for solids, so you need to look at the steps involved to model this specific geometry and try to fix the error on your own.

Options

Skip settings page

If ticked, subsequent invocations of the tool skip showing the Settings task panel.

Run BOP check

Die Funktion PrüfeGeometrie prüft, ob die Randdarstellung korrekt ist. (BRep oder B-rep) des Modells ist gültig. Zusätzlich zu dieser BRep Prüfung ist es möglich, eine zusätzliche BOP Prüfung (BOP= Boolesche OPerationen) durchzuführen.

Log errors

If ticked, any errors found are also logged in the report view. introduced in version 0.19

Shape Content

In addition to detecting potential geometry errors, this tool shows a range of properties regarding the selected object:

  • Checked object
  • Shape type
  • Number of geometric entities: vertices, edges, wires, faces, shells, solids, compsolids, compounds, total shapes
  • Geometric and mass properties:
    • Area
    • Volume
    • Mass
    • Length
    • Center of mass
    • Orientation
    • Symmetry axis
    • Symmetry point
    • Moments
    • First axis of inertia
    • Second axis of inertia
    • Third axis of inertia
    • Radius of gyration
    • Global placement