Part Box/pl: Difference between revisions
(Created page with "400px|Part_Box/pl|Część: Sześcian") |
|||
Line 22: | Line 22: | ||
[[Image:Part_Box.jpg|400px|Part_Box/pl|Część: Sześcian]] |
[[Image:Part_Box.jpg|400px|Part_Box/pl|Część: Sześcian]] |
||
== |
==Użycie== |
||
# |
# Przełącz się na środowisko pracy [[Image:Workbench_Part.svg|16px]] [[Part_Workbench/pl|Część]] |
||
# Istnieje kilka sposobów na wywołanie polecenia: |
|||
# There are several ways to invoke the command: |
|||
#* |
#* Naciśnij przycisk {{Button|[[Image:Part_Box.svg|16px]] Utwórz prostopadłościan}} na pasku narzędzi. |
||
#* |
#* Wybierz polecenie {{MenuCommand|Część → Bryła pierwotna → [[Image:Part_Box.svg|16px]] Prostopadłościan}} z paska menu. |
||
'''Result:''' The default result is a box with an equal length, width and height of 10 mm. It is attached the the global xy-plane and one edge is coincident with the global z-axis. |
'''Result:''' The default result is a box with an equal length, width and height of 10 mm. It is attached the the global xy-plane and one edge is coincident with the global z-axis. |
Revision as of 07:59, 27 June 2021
Część: Prostopadłościan |
Lokalizacja w menu |
---|
Część → Bryła pierwotna → Sześcian |
Środowisko pracy |
Środowisko pracy Część |
Domyślny skrót |
brak |
Wprowadzono w wersji |
- |
Zobacz także |
Bryły pierwotne |
Description
The Box command from the Part Workbench inserts a parametric, rectangular cuboid, geometric primitive into the active document. By default, the Box command will insert a 10x10x10 mm cube, positioned at the origin, with the label "cube". These parameters may be modified after the object has been added.
Użycie
- Przełącz się na środowisko pracy Część
- Istnieje kilka sposobów na wywołanie polecenia:
Result: The default result is a box with an equal length, width and height of 10 mm. It is attached the the global xy-plane and one edge is coincident with the global z-axis.
The box properties can later be edited, either in the property editor or by double-clicking on the box in the model tree.
Properties
Base
- DANEPlacement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
- DANELabel: Label given to the Box object. Change to suit your needs.
Box
- DANELength: The length parameter is the Box's dimension in the x-direction.
- DANEWidth: The width parameter is the Box's dimension in the y-direction.
- DANEHeight: The height parameter is the Box's dimension in the z-direction.
Scripting
The Box command can by used in macros and from the python console using the following function:
FreeCAD.ActiveDocument.addObject("Part::Box", "myBox")
- Where "myBox" is the label for the Box object.
- Returns newly created object of type Box.
You can access and modify attributes of the Box object. For example, you may wish to modify the length, width and height parameters.
FreeCAD.ActiveDocument.myBox.Length = 25
FreeCAD.ActiveDocument.myBox.Width = 15
FreeCAD.ActiveDocument.myBox.Height = 30
You can change its placement with:
FreeCAD.ActiveDocument.myBox.Placement = FreeCAD.Placement(FreeCAD.Vector(4, 6, 3), FreeCAD.Rotation(30, 45, 10))
- Bryły pierwotne: Prostopadłościan, Walec, Sfera, Stożek, Torus, Rura, Bryły pierwotne, Konstruktor kształtu
- Tworzenie i modyfikacja: Wyciągnij, Wyciągnij przez obrót, Odbicie lustrzane, Zaokrąglenie, Fazka, Utwórz ścianę z linii łamanych, Powierzchnia prostokreślna, Wyciągnięcie przez profile, Wyciągnięcie po ścieżce, Przecięcie, Przekrój poprzeczny, Odsunięcie 3D, Odsunięcie 2D, Grubość, Rzutowanie na powierzchnię, Mocowanie
- Funkcje logiczne: Utwórz złożenie, Rozbij złożenie, Filtr złożeń, Funkcje logiczne, Wytnij, Połączenie, Część wspólna, Przyłącz, Dołącz do osadzenia, Wycięcie połączenia, Funkcja logiczna rozdzielająca, Pokrój część, Krojenie, XOR
- Wymiarowanie: Wymiarowanie liniowe, Wymiarowanie kątowe, Odśwież wymiary, Usuń wymiary, Przełącz widoczność wymiaru, Przełącz widoczność wymiarów przestrzennych, Przełącz widoczność wymiarów przyrostowych
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Powierzchnia 3D, Rysunek Techniczny, Test Framework