Part Box/en: Difference between revisions

From FreeCAD Documentation
(Importing a new version from external source)
 
(Updating to match new version of source page)
Line 5: Line 5:
The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation.
The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation.


The default is a cube with parameter values for height, length and width being 10mm. The default placement values will locate the cuboid's local origin at the global origin (the location where all axis are 0) and the orientation such that
The properties can later be edited in the data tab for the box:


The height is the distance in the z-axis.


The length is the distance in the x-axis.
The length is the distance in the x-axis.


The width is the distance in the y-axis.
The width is the distance in the y-axis.

The height is the distance in the z-axis.



[[File:box.png|650px|a box created with the Box tool]]
[[File:box.png|650px|a box created with the Box tool]]

==FreeCAD - Version==

*{{Version|0.14}}

Beginning in FreeCAD version 0.14, a Part Box is referred to in the GUI elements as a Cube and the default label is "Cube".



{{clear}}
{{clear}}

Revision as of 19:42, 21 May 2014

Part_Box

Menu location
Part -> Box
Workbenches
Part_Module,Complete
Default shortcut
None
Introduced in version
-
See also
Part_CreatePrimitives

Creates a simple parametric box, with position, height, length and width parameters.

The default is for a cube of 10mm x 10mm x 10mm to be positioned at the global origin (point 0,0,0) on creation.

The default is a cube with parameter values for height, length and width being 10mm. The default placement values will locate the cuboid's local origin at the global origin (the location where all axis are 0) and the orientation such that


The length is the distance in the x-axis.

The width is the distance in the y-axis.

The height is the distance in the z-axis.


a box created with the Box tool

FreeCAD - Version

Beginning in FreeCAD version 0.14, a Part Box is referred to in the GUI elements as a Cube and the default label is "Cube".