PartDesign tutorial/fr: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Category:User Documentation/fr Category:Tutorials/fr") |
(Created page with "=== Introduction === Ce tutoriel a pour but d'initier le lecteur à l'utilisisation de l' atelier PartDesign.") |
||
Line 10: | Line 10: | ||
=== Introduction === |
=== Introduction === |
||
Ce tutoriel a pour but d'initier le lecteur à l'utilisisation de l' [[PartDesign Workbench|atelier PartDesign]]. |
|||
This tutorial will continue working with the sketch that was created previously. |
This tutorial will continue working with the sketch that was created previously. |
Revision as of 13:11, 4 March 2016
Tutoriel |
Thème |
---|
Sketcher |
Niveau |
Beginner |
Temps d'exécution estimé |
15 minutes |
Auteurs |
Drei |
Version de FreeCAD |
0.16 or above |
Fichiers exemples |
Voir aussi |
None |
Introduction
Ce tutoriel a pour but d'initier le lecteur à l'utilisisation de l' atelier PartDesign.
This tutorial will continue working with the sketch that was created previously.
File:PartDesign tutorial result.png
Requirements
- FreeCAD version 0.16 or above
- The reader has read the Sketcher tutorial
Procedure
Creating 3D geometry
The purpose of the PartDesign Workbench is to allow the user to create geometry in 3D space to fulfill a certain need. As such, it is equipped with tools to make use of sketches and convert them to 3D objects.
There are two basic features to achieve this: Pad and Revolution. Alongside their subtractive counterparts ( Pocket and Groove) they make up most of the common actions used by this workbench.
- Switch to the PartDesign Workbench
- Select the sketch that was created in the Sketcher tutorial
- Select Pad
- Set the distance to 5 mm
- Select Ok
Another way to create 3D geometry is with the Revolution tool.
- Create a sketch based on the image above
- Select Revolution
- Set the angle to 360°
Subtracting Features
We'll begin by creating a sketch with the shape we want to subtract.
- Select the top face of the Pad
- Select New sketch
- Select External Geometry
- Approach the edge of the pad. An arc should be highlighted
- Select the arc. An arc of a different color should appear in the sketch
- Create a circle centered on the same point as the arc and set its radius to 5 mm
Afterwards, we'll proceed to apply a Pocket feature.
- Select the sketch
- Select Pocket
- Set the distance to Through all
Pattern Features
We are now finished with the basic workflow for the Sketcher Module.