PartDesign SubtractiveWedge/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 13: Line 13:
== Cum se folosește ==
== Cum se folosește ==


# Press the {{KEY|[[Image:PartDesign SubtractiveWedge.png|24px]] '''Subtractive Wedge'''}} button. '''Note''': the Subtractive Wedge is part of an icon menu labelled ''Create an additive primitive''. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Subtractive Wedge in the menu.
# Press the {{KEY|[[Image:PartDesign SubtractiveWedge.png|24px]] '''Subtractive Wedge'''}} button. '''Note''': Wedge-ul subtractiv face parte dintr-un meniu de iconițe ''Create an additive primitive''. După lansarea FreeCAD, Subtractive Box este afișată în toolbar. Pentru a obține Wedge, faceți clic pe săgeată pentru a vizualiza Wedge subtractive din meniu.
# Set the Primitive parameters and [[Part_Attachment|Attachment]].
# Definițăi parametrii Primitivei și [[Part_Attachment|Attachment]].
# Click {{KEY|OK}}.
# Click {{KEY|OK}}.
# A Wedge feature appears under the active Body.
# O funcționalitate Wedge apare sum corpul (Body) activ.


== Opţiuni ==
== Opţiuni ==

Revision as of 10:55, 28 September 2018

PartDesign SubtractiveWedge

Menu location
Part Design → Create a subtractive primitive → Subtractive Wedge
Workbenches
PartDesign
Default shortcut
None
Introduced in version
-
See also
PartDesign CompPrimitiveSubtractive

Descriere

Se introduce o pană subtractivă în corpul activ. Forma sa este scăzută de solidul existent.

introduced in version 0.17

În stânga, corpul activ (A) în gri și pana substractivă (B) în roșu transparent; rezultatul final este în partea dreaptă.

Cum se folosește

  1. Press the Subtractive Wedge button. Note: Wedge-ul subtractiv face parte dintr-un meniu de iconițe Create an additive primitive. După lansarea FreeCAD, Subtractive Box este afișată în toolbar. Pentru a obține Wedge, faceți clic pe săgeată pentru a vizualiza Wedge subtractive din meniu.
  2. Definițăi parametrii Primitivei și Attachment.
  3. Click OK.
  4. O funcționalitate Wedge apare sum corpul (Body) activ.

Opţiuni

The Wedge can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Proprietăți

Using the default placement, the below inputs are:

  • DateX min/max : Base face X axis span
  • DateY min/max: Wedge height span
  • DateZ min/max : Base face Z axis span
  • DateX2 min/max : Top face X axis span
  • DateZ2 min/max : Top face Z axis span