PartDesign Cuneo sottrattivo
Cuneo sottrattivo |
Posizione nel menu |
---|
Part Design → Crea una primitiva sottrattiva → Cuneo |
Ambiente |
PartDesign |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Primitive sottrattive |
Descrizione
Inserisce un cuneo sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.
disponibile dalla versione 0.17
On the left: active body (A) shown in grey and subtractive wedge (B) shown in transparent red; result on the right.
How to use
- Press the Subtractive Wedge button. Note: the Subtractive Wedge is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Wedge, click on the down arrow besides the visible icon and select Subtractive Wedge in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Wedge feature appears under the active Body.
Options
The Wedge can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Properties
Using the default placement, the below inputs are:
- DatiX min/max : Base face X axis span
- DatiY min/max: Wedge height span
- DatiZ min/max : Base face Z axis span
- DatiX2 min/max : Top face X axis span
- DatiZ2 min/max : Top face Z axis span