PartDesign Prisma sottrattivo
Prisma sottrattivo |
Posizione nel menu |
---|
Part Design → Crea una primitiva sottrattiva → Prisma |
Ambiente |
PartDesign |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Primitive sottrattive |
Descrizione
Inserisce un prisma sottrattivo nel corpo attivo. La sua forma viene sottratta dal solido esistente.
disponibile dalla versione 0.17
A sinistra il corpo attivo (A) mostrato in grigio e il prisma sottrattivo (B) mostrato in rosso trasparente; a destra il risultato.
Utilizzo
- Premere il pulsante Prisma sottrattivo. Nota: Il Prisma sottrattivo fa parte di un menu di icone etichettato Crea una primitiva sottrattiva. Dopo l'avvio, FreeCAD visualizza Cubo sottrattivo nella barra degli strumenti. Per accedere al Prisma, fare clic sulla freccia verso il basso accanto all'icona visibile e selezionare Prisma nel menu.
- Impostare i parametri della primitiva e il modo di Associazione.
- Cliccare OK.
- Nel corpo attivo viene visualizzata una funzione Cono.
Options
The Prism can be edited after its creation in two ways:
- Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
- Via the Property editor.
Properties
- DatiAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
- DatiLabel: label given to the Prism object. Change to suit your needs.
- DatiPolygon: number of sides in the polygon cross-section of the prism.
- DatiCircumradius: circumscribed radius of the polygon cross-section of the prism.
- DatiHeight: height of the prism.