PartDesign SubtractiveLoft/pl: Difference between revisions

From FreeCAD Documentation
(Created page with "==Opcje==")
(Created page with "# Naciśnij przycisk {{Button|24px Odejmowanie wyciągnięciem prze profile}}. # W oknie dialogowym '...")
Line 26: Line 26:
===Przepływ pracy pa podstawie okienka dialogowego===
===Przepływ pracy pa podstawie okienka dialogowego===


# Press the {{Button|[[File:PartDesign_SubtractiveLoft.svg|24px]] [[PartDesign_SubtractiveLoft|Subtractive loft]]}} button.
# Naciśnij przycisk {{Button|[[File:PartDesign_SubtractiveLoft.svg|24px]] [[PartDesign_SubtractiveLoft/pl|Odejmowanie wyciągnięciem prze profile]]}}.
# In the '''Select feature''' dialog, select a sketch to be used as base profile object and click {{Button|OK}}.
# W oknie dialogowym '''Wybierz cechę''' wybierz szkic, który ma być użyty jako obiekt profilu bazowego i kliknij na przycisk {{Button|OK}}.
#* Alternatively, either a single sketch or the face of a 3D object ({{Version|0.20}}) can be selected prior to pressing the subtractive loft button.
#* Alternatywnie można wybrać pojedynczy szkic lub ścianę obiektu 3D ({{Version/pl|0.20}}) przed naciśnięciem przycisku wyciągnięcia.
# In the '''Loft parameters''', press the {{Button|Add Section}} button.
# W sekcji '''Parametry wyciągnięcia przez profile''' naciśnij przycisk {{Button|Dodaj sekcję profilu}}.
# Wybierz następny szkic w oknie [[3D_view/pl|widoku 3D]]. Powtórz tę czynność, aby wybrać więcej szkiców w kolejności, w jakiej mają być poddawane rzutowaniu. ''(Kolejność sekcji można zmienić w dowolnym momencie, później w oknie dialogowym wyciągnięcia, przeciągając sekcje z listy na żądaną pozycję {{Version|0.19}})''.
# Select the next sketch in the [[3D_view|3D view]]. Repeat to select more sketches in the order you want them to be lofted through. (You can change the section order any time later in the loft dialog by dragging sections in the list to the desired position.{{Version|0.19}})
# Set options if needed and click {{Button|OK}}.
# Ustaw opcje w razie potrzeby i kliknij {{Button|OK}}.


===Przepływ pracy pa podstawie zaznaczania===
===Przepływ pracy pa podstawie zaznaczania===

Revision as of 09:33, 8 January 2022

Projekt Części: Odejmowanie wyciągnięciem przez profile

Lokalizacja w menu
Projekt Części → Utwórz cechę przez odjęcie → Odejmowanie wyciągnięciem przez profile
Środowisko pracy
Projekt Części
Domyślny skrót
brak
Wprowadzono w wersji
0.17
Zobacz także
Wyciągnięcie przez profile, Odejmowanie wyciągnięciem wzdłuż ścieżki

Opis

Odejmowanie wyciągnięciem przez profile tworzy w aktywnej Zawartości bryłę do odjęcia poprzez przejście pomiędzy dwoma lub więcej szkicami (zwanymi również przekrojami). Jej kształt jest następnie odejmowany od istniejącej bryły.

Użycie

Przepływ pracy pa podstawie okienka dialogowego

  1. Naciśnij przycisk Odejmowanie wyciągnięciem prze profile.
  2. W oknie dialogowym Wybierz cechę wybierz szkic, który ma być użyty jako obiekt profilu bazowego i kliknij na przycisk OK.
    • Alternatywnie można wybrać pojedynczy szkic lub ścianę obiektu 3D (dostępne w wersji 0.20) przed naciśnięciem przycisku wyciągnięcia.
  3. W sekcji Parametry wyciągnięcia przez profile naciśnij przycisk Dodaj sekcję profilu.
  4. Wybierz następny szkic w oknie widoku 3D. Powtórz tę czynność, aby wybrać więcej szkiców w kolejności, w jakiej mają być poddawane rzutowaniu. (Kolejność sekcji można zmienić w dowolnym momencie, później w oknie dialogowym wyciągnięcia, przeciągając sekcje z listy na żądaną pozycję introduced in version 0.19).
  5. Ustaw opcje w razie potrzeby i kliknij OK.

Przepływ pracy pa podstawie zaznaczania

introduced in version 0.19

  1. Select several sketches. It is hereby important in what order you select them:
    • The sketch selected at first will become the base profile object in the next step
    • The sketches selected after the first one will become the loft sections. Also here the selection order is important: The sketch selected as second will become the first loft section, the one selected as third becomes the second section and so on. (You can change the section order any time later in the loft dialog by dragging sections in the list to the desired position.introduced in version 0.19)
    • The first or last selection can also be a face of a 3D object (introduced in version 0.20)
  2. Press the Subtractive loft button.
  3. Set options if needed and click OK.

Opcje

  • Ruled surface: makes straight transitions between cross-sections. Does not apply to a loft with two cross-sections. If not checked, transitions will be smooth.
  • Closed: makes a transition from the last cross-section to the first, creating a loop.

Properties

  • DANELabel: name given to the operation, this name can be changed at convenience.
  • DANESections: lists the sections used.
  • DANERuled: see Options.
  • DANEClosed: see Options.
  • DANEMidplane: N/A
  • DANEReversed: N/A
  • DANERefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.

Notes

  • To better control the shape of the loft, it is recommended that all cross-sections have the same number of segments. For example, for a loft between a rectangle and a circle, the circle should be broken down into 4 connected arcs.
  • You can loft from or toward a single vertex from a sketch or the body. introduced in version 0.20
  • Vertices can in most cases only be the start or end of a loft.
  • A cross-section cannot lie on the same plane as the one immediately preceding it.
  • If the sketch has inner geometry, i.e. the loft is supposed to have holes, then the order in which the sketch geometry is created, should be the same for all sections: Either start all sections with the inner geometry or start them all with the outer. Otherwise an invalid loft can be created where inner and outer walls cross.
  • It is not possible to loft disjoint or crossing loops.

Links