PartDesign Revolution: Difference between revisions
(Removed a reference to V0.16 and V0.17) |
mNo edit summary |
||
Line 55: | Line 55: | ||
* '''Vertical sketch axis''': selects the vertical sketch axis. |
* '''Vertical sketch axis''': selects the vertical sketch axis. |
||
* '''Horizontal sketch axis''': selects the horizontal sketch axis. |
* '''Horizontal sketch axis''': selects the horizontal sketch axis. |
||
* '''Construction line''': selects a construction line contained in the sketch used by the Revolution. The drop down list will contain an entry for each construction line. The first construction line |
* '''Construction line''': selects a construction line contained in the sketch used by the Revolution. The drop down list will contain an entry for each construction line. The first construction line will be labelled ''Construction line 1''. |
||
* '''Base (X/Y/Z) axis''': selects the X, Y or Z axis of the Body's Origin. |
* '''Base (X/Y/Z) axis''': selects the X, Y or Z axis of the Body's Origin. |
||
* '''Select reference...''': allows selection in the 3D view of an edge on the Body, or a [[PartDesign_Line|datum line]]. |
* '''Select reference...''': allows selection in the 3D view of an edge on the Body, or a [[PartDesign_Line|datum line]]. |
Revision as of 18:42, 4 February 2023
PartDesign Revolution |
Menu location |
---|
Part Design → Create an additive feature → Revolution |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
- |
See also |
PartDesign Groove |
Description
The Revolution tool creates a solid by revolving a selected sketch or 2D object about a given axis.
Above: sketch (A) is revolved 270 degrees counter-clockwise around axis (B); resulting solid (C) is shown right.
Usage
- Select the sketch to be revolved. A face on the existing solid can alternatively be used.
- Press the Revolution button.
- Set the Revolution parameters (see next section).
- Press OK.
Options
When creating a revolution, the Revolution parameters dialogue offers several parameters specifying how the sketch should be revolved.
AxisThis option specifies the axis about which the sketch is to be revolved.
AngleThis controls the angle through which the revolution is to be formed, e.g. 360° would be a full, contiguous revolution. The images in the examples section demonstrate some of the possibilities with specifying different angles. It is not possible to specify negative angles (use the Reversed option instead) or angles greater than 360°. Symmetric to planeIf checked, the revolution will extend half of the specified angle in both directions from the sketch plane. ReversedIf checked, the direction of revolution is reversed from default clockwise to counterclockwise. |
Properties
Below are properties which can be defined after creation of the feature. Data properties Base and Axis are uneditable.
- DataAngle: angle of rotation. See Angle.
- DataLabel: label given to the operation, can be changed at convenience.
- DataMidplane: true or false. See Symmetric to plane.
- DataReversed: true or false. See Reversed.
- DataRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
Examples
Useful links
A detailed example of use on the forum.
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Attach sketch, Edit sketch, Validate sketch, Check geometry, Create a sub-object(s) shape binder, Create a clone, Create a datum plane, Create a datum line, Create a datum point, Create a local coordinate system
- Modeling tools:
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Boolean: Boolean operation
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Preferences: Preferences, Fine tuning
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub