PartDesign Preferenze
La finestre delle preferenze di PartDesign si trovano nell'editor delle preferenze, Modifica → Preferenze → Part design.
Sono disponibili due schede: Generale e Visualizzazione della forma.
Generale
Al fine di visualizzare un oggetto in modo efficiente, la superficie è tessellata, cioè viene visualizzata con alcune piccole deviazioni. Questa tessellazione si applica non solo ai modelli di PartDesign, ma anche ad altri oggetti. Per la tessellazione il limite inferiore è fissato a 0,01%. Se si vuole davvero passare del tempo aggiuntivo per vedere l'aggiornamento della schermata, è possibile ridurre ulteriormente il limite inferiore. Aprire Strumenti-> Modifica parametri ... Questo apre l'editor dei parametri da cui si può accedere a BaseApp-> Preferenze-> Mod-> Parte. Fare clic con il pulsante destro del mouse nella parte destra della finestra Editor dei parametri e dal menu a comparsa scegliere "New float item". Impostare il valore sulla tessera minima a propria scelta. Ricordare che il valore nella sezione delle preferenze viene visualizzato in %, vale a dire che per avere un valore dello 0,005% qui si deve inserire "0,00005". Il valore minimo possibile è 1e-7.
In the Shape view tab you can specify the following:
Name | Description |
---|---|
Maximum deviation depending on the model bounding box | Maximum linear deflection of the tesselated objects from their surface |
Maximum angular deflection | Maximum angular deflection from one tesselated object section to the next section |
In order to display an object efficiently its surface is tesselated, i.e. it is displayed with some small deviations from it real surface. This applies not only to PartDesign models, but also to other objects in FreeCAD.
There is a lower limit for the tesselation of 0.01%. If you really want to spend the additional time you can reduce the lower limit even further by opening the menu Tools → Edit parameters... This opens the parameter editor where you navigate to BaseApp → Preferences → Mod → Part.
Right click on Mesh deviation choose in the context menu Change value. Set the value to the minimum tesselation of your choice. Please keep in mind that the value is in %, i.e. for a value of 0.005% you have to enter "0.00005". The smallest value possible is 1e-7. Note: In the preferences menu you will still see 0.01% even if you set a lower value.
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Edit sketch, Map sketch to face
- Modeling tools
- Datum tools: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a sub-object(s) shape binder, Create a clone
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Boolean: Boolean operation
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub