Part Design: Serie polare
Schiera polare |
Posizione nel menu |
---|
PartDesign → Schiera polare |
Ambiente |
PartDesign, Completo |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Schiera lineare |
Introduzione
Questo strumento prende una funzione selezionata e ne crea una serie di copie ruotate attorno a un asse prescelto.
L'oggetto risultante viene creato come un nuovo oggetto indipendente nella struttura.
Per esempio:
Opzioni
Durante la creazione di una funzione di schiera polare, il dialogo 'Parametri schiera polare' offre due modi diversi per specificare l'asse di rotazione del modello.
Normal sketch axis
An axis being normal to the sketch and starting in the origin of the sketch of the feature being used is taken as axis for the polar pattern.
The pattern direction can be reversed by ticking 'Reverse direction'.
Select reference
Here you can select an edge as a reference.
If that option is chosen only the edge of a feature being used just before the polar pattern-operation is choosable.
So you are able to use this option by:
- creating a helper feature (for example a pad) with on of the edges being the axis of the polar pattern
- create feature (pad or pocket) to be patterned
- select polar pattern feature and select edge as reference
- use another helper feature (for example pocket) to remove your first helper feature.
The pattern direction can be reversed by ticking 'Reverse direction'.
Angle and Occurrences
Specifies the angle to be covered by the pattern, and the total number of pattern shapes (including the original feature). For example, four occurrences in an angle of 180 degrees would give a spacing of 60 degrees between patterns. There is one exception: If the angle is 360 degrees, since first and last occurrence are identical, four occurrences will be spaced 90 degrees apart.
Limitazioni
- Per le limitazioni vedere la funzione Schiera lineare.