PartDesign PolarPattern/it: Difference between revisions

From FreeCAD Documentation
mNo edit summary
(Updating to match new version of source page)
 
(69 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
==Part Design: Schiera polare==


<div class="mw-translate-fuzzy">
{{GuiCommand/it|Name=PartDesign_PolarPattern|Name/it=Schiera polare|Workbenches=[[PartDesign Workbench/it|PartDesign]], Completo|MenuLocation=PartDesign → Schiera polare|SeeAlso=[[PartDesign_LinearPattern/it|Schiera lineare]]}}
{{Docnav/it|[[PartDesign_LinearPattern/it|Serie lineare]]|[[PartDesign_MultiTransform/it|Multitrasformazione]]|[[PartDesign_Workbench/it|PartDesign]]|IconL=PartDesign_LinearPattern.svg|IconC=Workbench_PartDesign.svg|IconR=PartDesign_MultiTransform.svg}}
</div>


<div class="mw-translate-fuzzy">
{{GuiCommand/it
|Name=PartDesign_PolarPattern
|Name/it=Serie polare
|Workbenches=[[PartDesign Workbench/it|PartDesign]]
|MenuLocation=PartDesign → Serie polare
|SeeAlso=[[PartDesign_LinearPattern/it|Serie lineare]]
}}
</div>


<span id="Description"></span>
'''Nota: questa descrizione è in parte obsoleta. Con la versione 0.13 e successive l'operazione è analoga, ma la selezione dell'asse avviene diversamente da come descritto in questa pagina. Ora è possibile utilizzare l'asse normale allo schizzo oppure utilizzare uno spigolo dell'oggetto e quindi produrre schiere orientate in qualsiasi direzione espressa con uno spigolo. Anche le finestre dello opzioni hanno un aspetto diverso.'''
==Descrizione==


<div class="mw-translate-fuzzy">
Lo strumento '''Serie polare''' prende una funzione selezionata e ne crea una serie di copie ruotate attorno a un asse prescelto. A partire da v0.17, è in grado di replicare più funzioni.
</div>


[[File:PartDesign PolarPattern example.png|none]]
Lo strumento prende come input un insieme di una o più operazioni selezionate, e con essi produce una seconda serie di operazioni ruotandole intorno a un dato asse.
<div class="mw-translate-fuzzy">
<br><br>
''Sopra: una tasca a forma di slot (B) realizzata sopra un solido di base (A, indicato anche come supporto) viene utilizzata per un modello polare. Il risultato (C) è mostrato a destra.''
Esempio:
<br>
</div>
[[Image:Polarpattern_example.png|600px|left]]
{{clear}}


<span id="Usage"></span>
=== Opzioni ===
==Utilizzo==
{|
|[[Image:Partdesign_Polarpattern_parameters_it.png]]
|
Quando si crea una schiera polare di operazioni, la finestra di dialogo '''Parametri della schiera polare''' offre due diversi modi per specificare l'asse di rotazione della schiera.


====Assi standard====
=== Create ===


# Optionally [[PartDesign_Body#Active_status|activate]] the correct Body.
Con i pulsanti di opzione, si può scegliere uno degli assi standard '''X''', '''Y''' o '''Z'''. La direzione della schiera può essere invertita spuntando '''Direzione inversa'''.
# Optionally select one or more features in the [[Tree_view|Tree view]] or the [[3D_view|3D view]].
# There are several ways to invoke the tool:
#* Press the {{Button|[[Image:PartDesign_PolarPattern.svg|16px]] [[PartDesign_PolarPattern|PolarPattern]]}} button.
#* Select the {{MenuCommand|Part Design → Apply a pattern → [[Image:PartDesign_PolarPattern.svg|16px]] PolarPattern}} option from the menu.
# If there is no active Body, and there are two or more Bodies in the document, the {{MenuCommand|Active Body Required}} dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
# If no features were selected the {{MenuCommand|Select feature}} [[Task_panel|task panel]] opens: select one or more (hold down the {{KEY|Ctrl}} key) from the list and press the {{Button|OK}} button.
# The {{MenuCommand|PolarPattern parameters}} [[Task_panel|task panel]] opens. See [[#Options|Options]] for more information.
# Press the {{Button|OK}} button to finish.


====Selezionare una faccia====
=== Edit ===


# Do one of the following:
Premendo il pulsante '''Direzione''' si può selezionare una faccia o un bordo da un solido preesistente per specificare la direzione. Notare che il pulsante deve essere premuto ogni volta che si vuole selezionare una nuova faccia o un nuovo bordo.
#* Double-click the PolarPattern object in the [[Tree_view|Tree view]].
#* Right-click the PolarPattern object in the [[Tree_view|Tree view]] and select {{MenuCommand|Edit PolarPattern}} from the context menu.
# The {{MenuCommand|PolarPattern parameters}} [[Task_panel|task panel]] opens. See [[#Options|Options]] for more information.
# Press the {{Button|OK}} button to finish.


<span id="Options"></span>
====Selezionare gli originali====
==Opzioni==


* To add features:
La finestra ''Vista combinata'' mostra lista delle operazioni (oggetti) "originali" che devono essere duplicate. Fare clic su una operazione per aggiungerla alla lista.
*# Press the {{Button|Add feature}} button.
*# Select a feature in the [[Tree_view|Tree view]] or the [[3D_view|3D view]].
*# Repeat to add more features.
* To remove features:
*# Press the {{Button|Remove feature}} button.
*# Do one of the following:
*#* Select a feature in the [[Tree_view|Tree view]] or the [[3D_view|3D view]].
*#* Select a feature in the list and press the {{KEY|Del}} key.
*#* Right-click a feature in the list and select {{MenuCommand|Remove}} from the context menu.
*# Repeat to remove more features.
* If there are several features in the pattern, their order can be important. See [[#Ordering_features|Ordering features]].
* Specify the {{MenuCommand|Axis}} of the pattern:
** {{MenuCommand|Normal sketch axis}}: The Z axis of the sketch (only available for sketch-based features).
** {{MenuCommand|Vertical sketch axis}}: The Y axis of the sketch (idem).
** {{MenuCommand|Horizontal sketch axis}}: The X axis of the sketch (idem).
** {{MenuCommand|Construction line #}}: A separate entry for each construction line in the sketch (idem).
** {{MenuCommand|Base X axis}}: The X axis of the Body.
** {{MenuCommand|Base Y axis}}: The Y axis of the Body.
** {{MenuCommand|Base Z axis}}: The Z axis of the Body.
** {{MenuCommand|Select reference...}}: Select a [[PartDesign_Line|Datum Line]] in the [[Tree_view|Tree view]] or a [[PartDesign_Line|Datum Line]] or edge in the [[3D_view|3D view]].
* Check the {{MenuCommand|Reverse direction}} checkbox to reverse the pattern.
* {{Version|1.0}}: Specify the angle {{MenuCommand|Mode}}:
** {{MenuCommand|Overall Angle}}: Enter the overall {{MenuCommand|Angle}}. If the angle is less than 360°, the occurrences are evenly distributed from 0° (first occurrence) to the given angle (last occurrence). If the angle is 360°, the occurrences are evenly distributed around the circle. For n occurrences an angle of 360° is equivalent to an angle of 360°*(1-1/n).
** {{Version|1.0}}: {{MenuCommand|Offset Angle}}: Enter the {{MenuCommand|Offset}} angle from a given point on the first occurrence to the same point on the next occurrence. For n occurrences: OverallAngle=(n-1)*Offset.
* Specify the number of {{MenuCommand|Occurrences}} (including the original feature).
* If the {{MenuCommand|Update view}} checkbox is checked the view will update in real time.


== Ordering features ==
====Angolo e numero di duplicati ====


If some of the selected features are additive and others subtractive, their order can have have an impact on the final result. You can change the order by dragging individual features in the list.
Specifica l'angolo da coprire con la schiera e il numero totale di forme della schiera (inclusa la forma originale). Per esempio, la combinazione quattro copie in un angolo di 180 gradi produce una spaziatura di 60 gradi tra ogni copia. C'è una eccezione: quando l'angolo è di 360 gradi e la prima e l'ultima copia sono identiche, vengono prodotte quattro copie distanziate 90 gradi.
|}
{{clear}}
===Limitazioni===


[[File:PartDesign_feature-order.gif]]
* Per le limitazioni vedere la funzione [[ PartDesign_LinearPattern/it| Schiera lineare]].
{{Caption|Effect of the feature order}}


<span id="Limitations"></span>
{{clear}}
==Limitazioni==


* Any shape in the pattern that does not overlap the parent feature will be excluded. This ensures that a PartDesign Body always consists of a single, connected solid.
===Esempio===
* The PartDesign patterns are not yet as optimized as their Draft counterparts. So for a large number of instances you should consider using a [[Draft_PolarArray|Draft PolarArray]] instead, combined with a Part boolean operation. This may require major changes to your model as you are leaving PartDesign and therefore cannot simply continue with further PartDesign features in the same body. An example is shown in [https://forum.freecadweb.org/viewtopic.php?f=3&t=55192 this Forum topic].
* A pattern cannot be applied directly to another pattern, be it polar, linear or a mirror. For this you need a [[PartDesign_MultiTransform|PartDesign MultiTransform]].


[[Image:Polarpattern_example2.jpg|left]]


<div class="mw-translate-fuzzy">
{{clear}}
{{Docnav/it|[[PartDesign_LinearPattern/it|Serie lineare]]|[[PartDesign_MultiTransform/it|Multitrasformazione]]|[[PartDesign_Workbench/it|PartDesign]]|IconL=PartDesign_LinearPattern.svg|IconC=Workbench_PartDesign.svg|IconR=PartDesign_MultiTransform.svg}}
</div>


{{PartDesign Tools navi{{#translation:}}}}
{{languages/it | {{en|PartDesign_PolarPattern}} {{es|PartDesign_PolarPattern/es}} {{fr|PartDesign_PolarPattern/fr}} }}
{{Userdocnavi{{#translation:}}}}

Latest revision as of 16:33, 7 May 2024

Serie polare

Posizione nel menu
PartDesign → Serie polare
Ambiente
PartDesign
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Serie lineare

Descrizione

Lo strumento Serie polare prende una funzione selezionata e ne crea una serie di copie ruotate attorno a un asse prescelto. A partire da v0.17, è in grado di replicare più funzioni.

Sopra: una tasca a forma di slot (B) realizzata sopra un solido di base (A, indicato anche come supporto) viene utilizzata per un modello polare. Il risultato (C) è mostrato a destra.

Utilizzo

Create

  1. Optionally activate the correct Body.
  2. Optionally select one or more features in the Tree view or the 3D view.
  3. There are several ways to invoke the tool:
    • Press the PolarPattern button.
    • Select the Part Design → Apply a pattern → PolarPattern option from the menu.
  4. If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
  5. If no features were selected the Select feature task panel opens: select one or more (hold down the Ctrl key) from the list and press the OK button.
  6. The PolarPattern parameters task panel opens. See Options for more information.
  7. Press the OK button to finish.

Edit

  1. Do one of the following:
    • Double-click the PolarPattern object in the Tree view.
    • Right-click the PolarPattern object in the Tree view and select Edit PolarPattern from the context menu.
  2. The PolarPattern parameters task panel opens. See Options for more information.
  3. Press the OK button to finish.

Opzioni

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list and press the Del key.
      • Right-click a feature in the list and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See Ordering features.
  • Specify the Axis of the pattern:
    • Normal sketch axis: The Z axis of the sketch (only available for sketch-based features).
    • Vertical sketch axis: The Y axis of the sketch (idem).
    • Horizontal sketch axis: The X axis of the sketch (idem).
    • Construction line #: A separate entry for each construction line in the sketch (idem).
    • Base X axis: The X axis of the Body.
    • Base Y axis: The Y axis of the Body.
    • Base Z axis: The Z axis of the Body.
    • Select reference...: Select a Datum Line in the Tree view or a Datum Line or edge in the 3D view.
  • Check the Reverse direction checkbox to reverse the pattern.
  • introduced in version 1.0: Specify the angle Mode:
    • Overall Angle: Enter the overall Angle. If the angle is less than 360°, the occurrences are evenly distributed from 0° (first occurrence) to the given angle (last occurrence). If the angle is 360°, the occurrences are evenly distributed around the circle. For n occurrences an angle of 360° is equivalent to an angle of 360°*(1-1/n).
    • introduced in version 1.0: Offset Angle: Enter the Offset angle from a given point on the first occurrence to the same point on the next occurrence. For n occurrences: OverallAngle=(n-1)*Offset.
  • Specify the number of Occurrences (including the original feature).
  • If the Update view checkbox is checked the view will update in real time.

Ordering features

If some of the selected features are additive and others subtractive, their order can have have an impact on the final result. You can change the order by dragging individual features in the list.

Effect of the feature order

Limitazioni

  • Any shape in the pattern that does not overlap the parent feature will be excluded. This ensures that a PartDesign Body always consists of a single, connected solid.
  • The PartDesign patterns are not yet as optimized as their Draft counterparts. So for a large number of instances you should consider using a Draft PolarArray instead, combined with a Part boolean operation. This may require major changes to your model as you are leaving PartDesign and therefore cannot simply continue with further PartDesign features in the same body. An example is shown in this Forum topic.
  • A pattern cannot be applied directly to another pattern, be it polar, linear or a mirror. For this you need a PartDesign MultiTransform.