PartDesign Установить точку завершения расчёта тела
PartDesign MoveTip |
Системное название |
---|
PartDesign MoveTip |
Расположение в меню |
Contextual menu → Set tip |
Верстаки |
PartDesign |
Быстрые клавиши |
Нет |
Представлено в версии |
0.17 |
См. также |
Move object to other body, Move object after other object |
Описание
Set tip, as this command is labeled in the context menu, redefines the tip, which is the feature exposed outside of the Body. By default, the tip is the last feature added to the Body; but sometimes it can be useful to temporarily set the tip to a feature earlier in the tree. This may be done to add a sketch, datum geometry or a feature which in retrospect should have been created earlier in the Body's history.
The tip is visually distinguished in the Model tree by a small white down arrow in a green circle overlayed on the feature's icon. For example, the following feature is the tip:
Использование
- In the Model tree, right-click on the feature to set as tip.
- Select from the list in the context menu Set tip.
- The new tip is set to visible, and all elements below the tip are hidden from view. Elements newly created from that point will be placed under the tip, and above the other existing elements.
Note: It is important not to forget to set the tip again to the last feature at the bottom of the Body tree.
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework