Projekt Części: Ustaw czubek

From FreeCAD Documentation
Revision as of 19:02, 8 May 2021 by Kwahoo (talk | contribs) (Created page with "Czubek jest wizualnie wyróżniony w drzewie modelu przez małą strzałkę w dół w zielonym okręgu nałożonym na ikonę cechy, Dla przykładu, poniższa cecha jest czubkiem:")

PartDesign MoveTip

Menu location
Contextual menu → Set tip
Workbenches
PartDesign
Default shortcut
None
Introduced in version
0.17
See also
PartDesign Move object to other body, PartDesign Move object after other object

Description

Ustaw czubek, jak jest opisane to polecenie w menu kontekstowym, redefiniuje czubek, który jest cechą widoczną na zewnątrz Zawartości. Domyślnie czubek jest ostatnią cechą dodaną do Zawartości, ale czasami może być przydatne chwilowe ustawienie czubka na wcześniejszą cechę w drzewie. To może zostać wykonane w celu dodania szkicu, geometrii bazowej czy cechy, które w retrospektywie powinny być stworzone wcześniej w historii Zawartości.

Czubek jest wizualnie wyróżniony w drzewie modelu przez małą strzałkę w dół w zielonym okręgu nałożonym na ikonę cechy, Dla przykładu, poniższa cecha jest czubkiem:

Usage

  1. In the Model tree, right-click on the feature to set as tip.
  2. Select from the list in the context menu Set tip.
  3. The new tip is set to visible, and all elements below the tip are hidden from view. Elements newly created from that point will be placed under the tip, and above the other existing elements.

Note: It is important not to forget to set the tip again to the last feature at the bottom of the Body tree.