PartDesign Migrer
Description
L'atelier PartDesign dans FreeCAD V0.17 introduit de nouveaux outils et éléments qui ne sont pas reconnus par les anciennes versions FreeCAD (0.16 et plus anciennes). Les documents FreeCAD créés dans des versions plus anciennes peuvent toujours être ouverts et modifiés. Pour bénéficier des nouvelles fonctionnalités, vous devez les migrer via le menu PartDesign → Migrer.
Comment l'utiliser
- Ouvrir un ancien document FreeCAD (≤ 0.16) .
- Connecter à l'atelier PartDesign .
- Aller au menu Part Design → Migrate.
- Si la migration fonctionne, un 24px Pièce conteneur sera créé qui contiendra une ou plusieurs [ [PartDesign Body | Bodies]], chacun hébergeant
Limites
- Before starting the migration process, check if the model was built with automatic refine options enabled (in Edit → Preferences → Part design → General), and set your preferences accordingly. This can be easily determined by successively toggling the visibility of the features in the Model tree. If no residual edges are left between features such as Pads and Pockets, the automatic refine options were disabled.
- If a document to migrate only contains sketches and PartDesign features, the migration process may likely succeed. Some features such as chamfers and fillets may require rebuilding.
- If the document to migrate has a mixed Part/Part Design/Draft work flow, the conversion will most likely fail or at best produce unexpected results, and will need to be migrated manually.