PartDesign: Repetiție Liniară
PartDesign LinearPattern |
Menu location |
---|
PartDesign → LinearPattern |
Workbenches |
PartDesign, Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Descriere
Instrumentul Linear pattern creează copii uniform distanțate dintr-o funcție(onalitate) într-o direcție liniară. Începând cu v0.17, se pot modela mai multe funcții.
Deasupra: Un bosaj în formă de L (B), realizat după un bosaj de bază (A, denumit și "suport"), este utilizat pentru un model repetitiv liniar. Rezultatul (C) este afișat în partea dreaptă.
Cum se folosește
- Select the feature(s) to be patterned. Alternatively, the feature can be selected from a dialogue after step 2.
- v0.16 and below Only a single feature can be selected, and it must be the last one at the bottom of the feature tree.
- Press the LinearPattern button.
- v0.17 and above Press Add feature to add a feature to be patterned. The feature must be visible in the 3D view:
- Switch to the Model tree;
- Select in the tree the feature to be added and press spacebar to make it visible in the 3D view;
- Switch back to the Tasks panel;
- Select the feature in the 3D view; it will be added to the list.
- Repeat to add other features.
- v0.17 and above Press Remove feature to remove a feature from the list, or right-click on the feature in the list and select Remove.
- Define the Direction. See Options.
- Define the Length (distance) between the last copied occurrence and the original feature.
- Set the number of occurrences.
- Press OK .
Opţiuni
Direcția
When creating a linear pattern feature, the LinearPattern parameters dialogue offers different ways of specifying the pattern direction.
Atunci când creați o funcție de model repetitiv liniar, dialogul LinearPattern parameters oferă diferite modalități de specificare a direcției de repetare a modelului.
Schița Axa Orizontală
Utilizează axa orizontală a schiței pentru direcție.
Schiță Axa Verticală
Utilizează axa vertical a schiței pentru direcție.
Schița Axa Normală
v0.17 and above Uses the normal axis of the sketch for direction.
Selectare referințe...
Vă permite să selectați fie o linie de referință, fie o margine a unui obiect, sau o linie din schiță care să fie utilizată pentru direcție.
Schiță Axă Personalizată
Dacă schița care definește funcția care urmează să fie modelată conține, de asemenea, o linie de construcție (sau linii), atunci lista derulantă/contextuală va conține o axă de schiță personalizată pentru fiecare linie de construcție. Prima linie de construcție va fi etichetă "Axă de schiță 0".
Base (X/Y/Z) axis
v0.17 and above Select one of the Body Origin's standard axis (X, Y or Z) as direction.
Limitations
- Pattern shapes may not overlap one another except for the special case of only two occurrences (original plus one copy)
- Any pattern shapes that do not overlap the original's support will be excluded. This ensures that a PartDesign feature always consists of a single, connected solid
- For further limitations, see the mirrored feature