DiseñoPieza PatrónLineal
PartDesign_LinearPattern |
Ubicación en el Menú |
---|
Diseño de Piezas-> Matriz lineal |
Entornos de trabajo |
Diseño de Piezas, Complete |
Atajo de teclado por defecto |
Ninguno |
Introducido en versión |
- |
Ver también |
Ninguno |
Introducción
'Crea una matriz lineal de operaciones' - Esta herramienta toma un conjunto de una o más operaciones seleccionadas como sus entradas (los 'originales'), y produce un segundo conjunto de operaciones trasladándolas en la dirección indicada. Por ejemplo:
Opciones
Cuando se crea una matriz lineal de operaciones, el letrero de diálogo de 'parámetros de matriz lineal' ofrece dos modos diferentes de especificar la dirección de la matriz.
Ejes estándar
Uno de los ejes estándar X, Y o Z se puede seleccionar con las casillas de selección. La dirección de la matriz se puede invertir seleccionando 'Invertir dirección'.
Seleccionar una cara
Presionando el botón 'Dirección' permite seleccionar una cara o una arista de un sólido pre-existente para especificar la dirección. La dirección de la matriz será normal a la cara si está seleccionada una cara. Observa que el botón debe presionarse de nuevo cada vez para seleccionar una nueva cara o arista.
Seleccionar los originales
La lista de los 'originales' muestra las operaciones que se van a incluir en la matriz. Designando cualquier operación se añadirá a la lista.
Longitud e instancias
Especifica la longitud a ser cubierta por la matriz, y el número total de instancias (incluyendo la operación original). Por ejemplo, seis instancias en una longitud de 150 daría un espacio de 30 entre las instancias de la matriz (150 dividido por 5, ya que hay 5 'espacios' para un total de seis instancias!).
The LinearPattern tool creates evenly spaced copies of a feature in a linear direction. As of version 0.17 and above the Linear pattern tool can pattern multiple features.
Above: An L-shaped pad (B) made on top of a base pad (A, also referred to as support) is used for a linear pattern. The result (C) is shown on the right.
Usage
To create a pattern:
- Select the feature (introduced in version 0.19 or several features) to be patterned.
- Press the LinearPattern button.
- Define the Direction. See Options.
- Define the Length (distance) between the last copied occurrence and the original feature.
- Set the number of Occurrences.
- If you have several features in the pattern, their order can be important, see for example the image in the PolarPattern feature. introduced in version 0.19 You can change the order by dragging the feature in the list and you will see the result immediately as preview.
- Press OK.
To add or remove features from an existing pattern:
- Press Add feature to add a feature to be patterned. The feature must be visible in the 3D view:
- Switch to the Model tree;
- Select in the tree the feature to be added and press Space to make it visible in the 3D view;
- Switch back to the Tasks panel;
- Select the feature in the 3D view; it will be added to the list.
- Repeat to add other features.
- Press Remove feature to remove a feature from the list, or right-click on the feature in the list and select Remove
Options
Direction
When creating a linear pattern feature, the LinearPattern parameters dialogue offers different ways of specifying the pattern direction.
Horizontal sketch axis
Uses the horizontal axis of the sketch for direction.
Vertical sketch axis
Uses the vertical axis of the sketch for direction.
Normal sketch axis
version 0.17 and above Uses the normal axis of the sketch for direction.
Select reference...
Allows you to select either a DatumLine or an edge of an object or a line of a sketch to use for direction.
Custom Sketch Axis
If the sketch which defines the feature to be patterned also contains a construction line (or lines), then the drop down list will contain one custom sketch axis for each construction line. The first construction line will be labelled Sketch axis 0.
Base (X/Y/Z) axis
version 0.17 and above Select one of the Body Origin's standard axis (X, Y or Z) as direction.
Limitaciones
- Las formas de la matriz no se pueden superponer sobre otras excepto para el caso especial de sólo dos ocurrencias (original y una copia)
- Cualquier forma de la matriz que no se superponga con el soporte del original será excluida. Esto asegura que la operación de Diseño de Pieza siempre consiste en un sólido conectado individual
- Para más limitaciones, mira operación de simetría
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Edit sketch, Map sketch to face
- Modeling tools
- Datum tools: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a sub-object(s) shape binder, Create a clone
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Boolean: Boolean operation
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub