PartDesign: Canelură/ Groove
PartDesign Groove |
Menu location |
---|
PartDesign → Groove |
Workbenches |
PartDesign, Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Descriere
Instrumentul Canelură/ Groove, învârte o schiță sau un profil selectat pe o anumită axă, tăind materialul din suport.
Above: sketch (A) is revolved around axis (B); resulting groove on solid (C) is shown right.
Cum se folosește
- Selectați schița care va fi rotită.
- v0.17 and above A face on the existing solid can alternatively be used.
- v0.16 and below The sketch must be mapped to the planar face of an existing solid or Part Design feature, or an error message will appear .
- Press the Groove button.
- Set the Groove parameters (see next section).
- Press OK.
Opţiuni
Atunci când este crată o canelură, dialogul privind Groove parameters oferă câteva variante de parametrii care specifică cum schița profilului canelurii poate fi rotită.
AxeThis option specifies the axis about which the sketch is to be revolved.
UnghiulThis controls the angle through which the groove is to be formed, e.g. 360° would be a full, contiguous revolution. It is not possible to specify negative angles (use the Reversed option instead) or angles greater than 360° .
Planul simetricIf checked, the groove will extend half of the specified angle in both directions from the sketch plane . ReversedIf checked, the direction of revolution is reversed from default clockwise to counterclockwise . |
Proprietăți
Mai jos sunt proprietăți care pot fi definite după crearea funcției. Proprietățile de date "Base" și "Axis" nu pot fi modificate.
- DateAngle: angle of rotation. See Angle .
- DateLabel: label given to the operation, can be changed at convenience.
- DateMidplane: true or false. See Symmetric to plane.
- DateReversed: true or false. See Reversed.
- DateRefine: v0.17 and above true or false.
Dacă este setat la true, curăță solidul de margini reziduale lăsate de funcții(onalități). Consultați Part RefineShape pentru mai multe detalii.
Notes
- A ShapeBinder cannot be used for the profile.
- When using a SubShapeBinder for the profile, selecting the binder in the Tree view will fail, instead the binder's face has to selected in the 3D view.
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Edit sketch, Map sketch to face
- Modeling tools
- Datum tools: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a sub-object(s) shape binder, Create a clone
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Boolean: Boolean operation
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub