PartDesign AdditivePipe
|
Menu location |
---|
Part Design → Create an additive feature → Additive pipe |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
0.17 |
See also |
PartDesign AdditiveLoft, PartDesign SubtractivePipe |
Description
Additive Pipe creates a solid in the active Body by sweeping one or more sketches (also referred to as cross-sections) along an open or closed path. If the Body already contains features, the additive pipe will be merged to them.
On the left: cross-sections (A) and (B) to be swept along path (C); resulting Additive pipe on the right.
Usage
The example image above shows two different cross-section shapes. The text below will describe the procedure with a single shape only. This will achieve a part with the same cross-section along the whole path.
- Create two separate sketches;
- one for the path, e.g two lines connected by a curve as in the image above,
- one for the cross-section shape, e.g. a circle as the first shape in the image above. Instead of a sketch also the face of a 3D object can be used. (introduced in version 0.20)
- Arrange the two shapes in 3D correctly. It is recommended to place the origin of the cross-section onto the line of the path. The two sketches should in most cases be orthogonal. This can be done with the 'Map Mode' function (make both sketches visible with Space. Select the cross-section sketch. Select Properties/DataTab/MapMode. Click the appearing ... button at the right side. In the Attachment Dialog select a vertex of the path sketch and select the correct mode to get the two sketches aligned correctly.
- There are several ways to invoke the tool:
- Press the
Additive pipe button.
- Select the PartDesign → Create an additive feature →
Additive pipe option from the menu.
- Press the
- In the Select feature dialog select a sketch to be used cross-section and click OK.
- Alternatively, a sketch or a face of a 3D object (introduced in version 0.20) can be selected before starting the tool. You will not get this dialog then.
- In the Pipe parameters under Path to sweep along, press the Object button.
- Select the sketch to be used as path in the 3D view. In this case the whole sketch will be used as path.
- Alternatively, single edges of the sketch can be selected by pressing Add Edge and selecting edges in the 3D view. Note that you must press the Add Edge for each edge again. You must select a continous line with no branches.
- The other settings should work with the default settings in most cases.
- Click OK.
To use more than one cross-section, start with the first cross-section sketch as described above. Then under Section transformation set the Transform mode to Multisection; press Add Section then select a sketch in the 3D view. Repeat for each additional cross-section.
Options
Section Transformation:
- Select Constant to use a single profile
- Select Multisection to use multiple profiles
Section Orientation:
- Standard
- This keeps the cross section shape perpendicular to the path. This is the default setting.
- Fixed
- Orientation set by first profile and constant throughout. This deactivates the alignment to the path normal vector. That means that the cross-section shape will not rotate with the path. Sweep along a circle to see the effect.
- Frenet
- Create minimum possible twisting of profile. For more info, see Frenet-Serret Formulas
- Auxiliary
- Specify secondary path to guide pipe.
- For each point P along the sweep path, there will be a corresponding point Q on the auxiliary path.
- As the profile is swept, it will be transformed such that the PQ line is the normal of the sweep path.
- If Curvilinear is set, then the Q points are scaled proportionally along the sweep path, regardless of it's length.
- Binormal
- Specify binormal vector in X, Y and Z
Corner Transition
- Transformed
- Right
- Rounded
Properties
See also: Property editor.
A PartDesign AdditivePipe object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Base
- Data (Hidden)Add Sub Shape (
PartShape
): - Data (Hidden)Base Feature (
Link
): - Data (Hidden)_Body (
LinkHidden
):
Part Design
- DataRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
Sketch Based
- DataProfile (
LinkSub
): reference to sketch. - DataMidplane (
Bool
): extrude symmetrically to sketch face. - DataReversed (
Bool
): reverses extrusion direction. - DataUp To Face (
LinkSub
): face where feature will end. - DataAllow Multi Face (
Bool
): allow multiple faces in profile.
Sweep
- DataSections (
LinkSubList
): lists the sections used. - DataSpine (
LinkSub
): spine (path) to sweep along. - DataSpine Tangent (
Bool
): true or false (default). True extends the spine to include tangent edges. - Data (Hidden)Auxiliary Spine (
LinkSub
): secondary spine (path) to orient the Sweep. - DataAuxiliary Spine Tangent (
Bool
): true or false (default). True extends the auxiliary spine to include tangent edges. - DataAuxiliary Curvelinear (
Bool
): true or false (default). True calculates the normal between equidistant points on both spines. - DataMode (
Enumeration
): profile mode. Options are Fixed, Frenet, Auxiliary or Binormal. See Options. - DataBinormal (
Vector
): binormal vector for corresponding orientation mode. - DataTransition (
Enumeration
): transition mode. Options are Transformed, Right Corner or Round Corner. - DataTransformation (
Enumeration
): Constant uses a single cross-section. Multisection uses two or more cross-sections. Linear, S-shape and Interpolation are currently not functional.
Notes
- To better control the shape of the pipe, it is recommended that all cross-sections have the same number of segments. For example, for a pipe between a rectangle and a circle, the circle should be broken down into 4 connected arcs.
- You can pipe from or toward a single vertex from a sketch or the body. introduced in version 0.20
- When you select a vertex as section, it must be the last section of the pipe. Otherwise the pipe body would consist of two solids connected at a single point. This would violates the CAD kernel's definition of a 3D object. You can change the order of the sections by dragging them in the list.
- The path can only be from a single sketch, feature or ShapeBinder. In case you want to sweep along several edges from different sketches, use a SubShapeBinder.
- The path must not contain branches or T-junctions etc. Loops are allowed.
- It can lead to issues if the cross-section is not perpendicular to the path in 3D.
- A cross-section cannot lie on the same plane as the one immediately preceding it.
- The cross-sections must not contain disjoint or crossing loops.
- If the sketch has inner geometry, then the order in which the sketch geometry is created should be the same for all sections. Either start all sections with the inner geometry, or start them all with the outer. Otherwise an invalid pipe will be created where inner and outer walls cross.
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Attach sketch, Edit sketch, Validate sketch, Check geometry, Create a sub-object(s) shape binder, Create a clone, Create a datum plane, Create a datum line, Create a datum point, Create a local coordinate system
- Modeling tools:
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Boolean: Boolean operation
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Preferences: Preferences, Fine tuning
![](/images/thumb/9/94/User_hub.png/24px-User_hub.png)
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub