Mouse navigation/cs: Difference between revisions

From FreeCAD Documentation
(Created page with "== Podpora hardwaru ==")
(Updating to match new version of source page)
 
(56 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<languages/>

{{Docnav
|[[Getting_started|Getting started]]
|[[Selection_methods|Selection methods]]
}}

{{TOCright}}

==Overview==

<div class="mw-translate-fuzzy">
"Model myši" ve FreeCADu obsahuje příkazy používané k vizuální navigaci ve 3D prostoru a interakci se zobrazenými objekty. FreeCAD podporuje vícenásobný model navigačních stylů myši. Defaultní navigační styl je označován jako "CAD navigace" a je velmi jednoduchý a praktický, ale FreeCAD také poskytuje alternativní navigační styly, které si můžete vubrat podle Vašich požadavků.
"Model myši" ve FreeCADu obsahuje příkazy používané k vizuální navigaci ve 3D prostoru a interakci se zobrazenými objekty. FreeCAD podporuje vícenásobný model navigačních stylů myši. Defaultní navigační styl je označován jako "CAD navigace" a je velmi jednoduchý a praktický, ale FreeCAD také poskytuje alternativní navigační styly, které si můžete vubrat podle Vašich požadavků.
</div>

For more information about selecting objects see [[Selection_methods|Selection methods]].


For more information about manipulating objects see [[Std_TransformManip|Std TransformManip]].
== Navigace ==
Práce s objekty je společná pro všechny pracovní plochy. Následující gesta myši mohou být použita pro řízení pozice objektu a pohledu podle toho jaky styl je vybrán.


== Selecting a navigation style ==
Jsou dva způsoby změny navigačního stylu:


<div class="mw-translate-fuzzy">
* V sekci Display (Zobrazení) [[Preferences Editor|Editoru Předvoleb]], záložka ''3D Pohled'';
* V sekci Display (Zobrazení) [[Preferences Editor/cs|Editoru Předvoleb]], záložka ''3D Pohled'';
* Kliknutím pravého tlačítka myši v prázdném prostoru v oblasti 3D pohledu a potom výběrem "Navigačního stylu" v kontextuálním menu.
* Kliknutím pravého tlačítka myši v prázdném prostoru v oblasti 3D pohledu a potom výběrem "Navigačního stylu" v kontextuálním menu.
</div>


== Available navigation styles ==


With all navigation styles, unless selecting objects from a sketch in edit mode, you must hold {{KEY|Ctrl}} to select multiple objects.

<span id="Blender_navigation"></span>
<div class="mw-translate-fuzzy">
=== Blender Navigation ===
</div>

The Blender navigation style was modeled after [https://www.blender.org Blender].

<div class="mw-translate-fuzzy">
V Blender Navigaci, vytvářené podle [http://www.blender.org Blenderu], není snímání (kamerou) pouze myší. Při snímání pohledu kamerou musíte držet klávesu {{KEY|SHIFT}}.
{{Blender Navigation/cs}}
{{Blender Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Shift={{KEY|Shift}}
|Select_text=Press the left mouse button over an object you want to select.
|Pan_text=Hold {{KEY|Shift}} and the middle mouse button, then move the pointer.

Alternatively, hold both left and right mouse buttons, and then move the pointer.
|Zoom_text=Use the mouse wheel to zoom in and out.
|Rotate_view_text=Hold the middle mouse button, then move the pointer.
}}
</div>

Alternatively, hold both left and right mouse buttons, and then move the pointer.
|Zoom_text=Use the mouse wheel to zoom in and out.
|Rotate_view_text=Hold the middle mouse button, then move the pointer.
}}

=== CAD navigation ===

<div class="mw-translate-fuzzy">
=== CAD Navigace (default) ===
=== CAD Navigace (default) ===
Je to defaultní navigační styl, který umožňuje uživateli jednoduchou kontrolu nad pohledem a nepožaduje používání klávesnice, kromě vícenásobného výběru.
Je to defaultní navigační styl, který umožňuje uživateli jednoduchou kontrolu nad pohledem a nepožaduje používání klávesnice, kromě vícenásobného výběru.
{{CAD Navigation}}
{{CAD Navigation/cs}}
{{CAD Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view<br>First method
|Rotate_view_alt_name=Rotate view<br>Alternate method
|Ctrl={{KEY|Ctrl}}
|Shift={{KEY|Shift}}
|Select_text=Press the left mouse button over an object you want to select.


Holding down {{KEY|Ctrl}} allows the selection of multiple objects.
|Pan_text=Hold the middle mouse button, then move the pointer.
|Pan_mode_text=Pan mode: hold the {{KEY|Ctrl}} key, press the right mouse button once, then move the pointer. {{Version|0.17}}
|Zoom_text=Use the mouse wheel to zoom in and out.


Clicking the middle mouse button re-centers the view on the location of the cursor.
|Zoom_mode_text=Zoom mode: hold the {{KEY|Ctrl}} and {{KEY|Shift}} keys, press the right mouse button once, then move the pointer. {{Version|0.17}}
|Rotate_view_text=Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

The cursor location when the middle mouse button is pressed determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the view continues [[spinning]], if this is enabled.

A double click with the middle mouse button sets a new center of rotation.
|Rotate_view_mode_text=Rotate mode: hold the {{KEY|Shift}} key, press the right mouse button once, then move the pointer. {{Version|0.17}}
|Rotate_view_alt_text=Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

With this method the middle mouse button may be released after the right mouse button is held pressed.

Users who use the mouse with their right hand may find this method easier than the first method.
}}
</div>

{{CAD Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view<br>First method
|Rotate_view_alt_name=Rotate view<br>Alternate method
|Ctrl={{KEY|Ctrl}}
|Shift={{KEY|Shift}}
|Select_text=Press the left mouse button over an object you want to select.
|Pan_text=Hold the middle mouse button, then move the pointer.
|Pan_mode_text=Pan mode: hold the {{KEY|Ctrl}} key, press the right mouse button once, then move the pointer.
|Zoom_text=Use the mouse wheel to zoom in and out.

Clicking the middle mouse button re-centers the view on the location of the cursor.
|Zoom_mode_text=Zoom mode: hold the {{KEY|Ctrl}} and {{KEY|Shift}} keys, press the right mouse button once, then move the pointer.
|Rotate_view_text=Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

If the buttons are released before you stop the mouse motion, the view continues spinning, if this is enabled.

A double click with the middle mouse button sets a new center of rotation.
|Rotate_view_mode_text=Rotate mode: hold the {{KEY|Shift}} key, press the right mouse button once, then move the pointer.
|Rotate_view_alt_text=Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

With this method the middle mouse button may be released after the right mouse button is held pressed.

Users who use the mouse with their right hand may find this method easier than the first method.
}}

<span id="Gesture_navigation"></span>
<div class="mw-translate-fuzzy">
=== Gesture Navigation (v0.16) ===
</div>

This style was tailored for use with a touchscreen and pen. Nevertheless, it can also be used with a mouse, and is recommended for use when using a Mac with a trackpad.

<div class="mw-translate-fuzzy">
This navigation style was tailored for usability with touchscreen and pen, but is very usable with mouse too.
{{Gesture Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Tilt_view_name=Tilt view
|Select_text=Press the left mouse button over an object you want to select.
|Select_gesture_text=Tap to select.
|Pan_text=Hold the right mouse button, then move the pointer.
|Pan_gesture_text=Drag with two fingers.

Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button.
|Zoom_text=Use the mouse wheel to zoom in and out.
|Zoom_gesture_text=Drag two fingers (pinch) closer or farther apart.
|Rotate_view_text=Hold the left mouse button, then move the pointer.
In [[Sketcher Workbench|Sketcher]] and other edit modes, this behavior is disabled. Hold {{KEY|Alt}} when pressing the mouse button to enter rotation mode.

To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press {{KEY|H}} on the keyboard.
|Rotate_view_gesture_text=Drag with one finger to rotate.

Hold {{KEY|Alt}} when in the [[Sketcher Workbench|Sketcher]].
|Tilt_view_text=Hold both left and right mouse buttons, and then move the pointer sideways.
|Tilt_view_gesture_text=Rotate the imaginary line formed by two touch points.

On v0.18 this method is disabled by default. To enable, go to {{MenuCommand|Edit → Preferences → Display}}, and untick "Disable touchscreen tilt gesture" checkbox.
}}
</div>

Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button.
|Zoom_text=Use the mouse wheel to zoom in and out.
|Zoom_gesture_text=Drag two fingers (pinch) closer or farther apart.
|Rotate_view_text=Hold the left mouse button, then move the pointer.
In [[Sketcher Workbench|Sketcher]] and other edit modes, this behavior is disabled. Hold {{KEY|Alt}} when pressing the mouse button to enter rotation mode.

To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press {{KEY|H}} on the keyboard.
|Rotate_view_gesture_text=Drag with one finger to rotate.

Hold {{KEY|Alt}} when in the [[Sketcher Workbench|Sketcher]].
|Tilt_view_text=Hold both left and right mouse buttons, then move the pointer sideways.
|Tilt_view_gesture_text=Rotate the imaginary line formed by two touch points.

This method is disabled by default. To enable, go to {{MenuCommand|Edit → Preferences → Display → Navigation}}, and uncheck the "Disable touchscreen tilt gesture" checkbox.
}}

<span id="Maya-Gesture_navigation"></span>
<div class="mw-translate-fuzzy">
=== Maya-Gesture Navigation ===
</div>

In Maya-Gesture Navigation, panning, zooming, and rotating the view require the {{KEY|Alt}} key together with a mouse button; therefore, a three-button mouse is required. It's also possible to use gestures as this style was developed over the [[#Gesture_navigation|Gesture navigation]] style.

<div class="mw-translate-fuzzy">
In Maya-Gesture Navigation, all view movements are activated pressing {{KEY|ALT}} and a mouse button, so that it will be needed to have a 3 button mouse in order to correctly use this navigation mode. Alternately it's possible to use gestures as this mode was been developed over the normal Gesture Navigation mode.
{{MayaGesture Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Alt={{KEY|Alt}}
|Select_text=Press the left mouse button over an object you want to select.
|Pan_text=Hold {{KEY|Alt}} and the middle mouse button, then move the pointer.
|Zoom_text=Hold {{KEY|Alt}} and the right mouse button, then move the pointer.

Alternatively, use the mouse wheel to zoom in and out.
|Rotate_view_text=Hold {{KEY|Alt}} and the left mouse button, then move the pointer.
}}
</div>

Alternatively, use the mouse wheel to zoom in and out.
|Rotate_view_text=Hold {{KEY|Alt}} and the left mouse button, then move the pointer.
}}

=== OpenCascade navigation ===

The OpenCascade navigation style was modeled after [https://www.opencascade.com/ OpenCascade].

{{OpenCascade Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Ctrl={{KEY|Ctrl}}
|Select_text=Press the left mouse button over an object you want to select.
|Pan_text=Hold the middle mouse button, then move the pointer.
|Zoom_text=Use the mouse wheel to zoom in and out.

Alternatively, hold {{KEY|Ctrl}} and the left mouse button, then move the pointer.
|Rotate_view_text=Hold {{KEY|Ctrl}} and the right mouse button, then move the pointer.
}}

=== OpenInventor navigation ===

<div class="mw-translate-fuzzy">
=== Inventor Navigation (Tvůrčí navigace) ===
=== Inventor Navigation (Tvůrčí navigace) ===
Tvůrčí navigace, vytvářená podle [http://en.wikipedia.org/wiki/Open_Inventor Open Inventor] (nezaměňovat s Autodesk Inventor), kde se nepoužívá pouze výběr myší. Při vybírání objektů musíte držet stisknutou klávesu {{KEY|CTRL}}.
Tvůrčí navigace, vytvářená podle [http://en.wikipedia.org/wiki/Open_Inventor Open Inventor] (nezaměňovat s Autodesk Inventor), kde se nepoužívá pouze výběr myší. Při vybírání objektů musíte držet stisknutou klávesu {{KEY|CTRL}}.
{{Inventor Navigation}}
{{Inventor Navigation/cs}}
{{OpenInventor Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Ctrl={{KEY|Ctrl}}
|Select_text=Hold {{KEY|Ctrl}}, then press the left mouse button over an object you want to select.
|Pan_text=Hold the middle mouse button, then move the pointer.
|Zoom_text=Use the mouse wheel to zoom in and out.


Alternatively, hold the middle mouse button, then press and hold the left mouse button, then move the pointer.
|Rotate_view_text=Hold the left mouse button, then move the pointer.
}}
</div>


This style is not based on Autodesk Inventor.
=== Blender Navigation ===


{{OpenInventor Navigation
V Blender Navigaci, vytvářené podle [http://www.blender.org Blenderu], není snímání (kamerou) pouze myší. Při snímání pohledu kamerou musíte držet klávesu {{KEY|SHIFT}}.
|Select_name=Select
{{Blender Navigation}}
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Shift={{KEY|Shift}}
|Select_text=Hold {{KEY|Shift}}, then press the left mouse button over an object you want to select.


Hold {{KEY|Ctrl}} instead to select multiple objects.
|Pan_text=Hold the middle mouse button, then move the pointer.
|Zoom_text=Use the mouse wheel to zoom in and out.


Alternatively, hold the middle mouse button, then press and hold the left mouse button, then move the pointer.
=== Touchpad Navigation ===
|Rotate_view_text=Hold the left mouse button, then move the pointer.
}}


=== OpenSCAD navigation ===
V Touchpad Navigaci, bez snímání, zoomování, a otáčení pohledu, jsou pouze operace s myší (nebo touchpadem).
{{Touchpad Navigation}}


The OpenSCAD navigation style was modeled after [https://openscad.org/ OpenSCAD].
== Výběr objektu ==


{{Version|0.20}}
=== Jednoduchý výběr ===
Objekty mohou být vybírány kliknutím levým tlačítkem myši na objekt ve 3D-pohledu nebo výběrem objektu ve stromu pohledu.


{{OpenSCAD_Navigation
=== Předvýběr ===
|Select_name=Select
Je zde také možný mechanizmus''Předvýběru'' který zvýrazňuje objekty a před výběrem zobrazuje informace o objektu při přechodu myší nad objektem. Pokud Vám takové chování nevyhovuje nebo pokud máte pomalý stroj, můžete v předvolbách přepnout Předvýběr na Off (Vypnuto).
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Shift={{KEY|Shift}}
|Select_text=Press the left mouse button over an object you want to select.


{{VersionMinus|0.21}} Hold {{KEY|Ctrl}} and {{KEY|Shift}} when pressing the mouse button to drag an object in a sketch in edit mode.
== Manipulace s objekty ==
|Pan_text=Hold the right mouse button, then move the pointer.
FreeCAD nabízí ''manipulátory'' což jsou ovladače, které mohou být použity pro modifikace vzhledu objektu, jeho tvaru nebo jiných parametrů.
|Zoom_text=Hold the middle mouse button, then move the pointer.
Alternatively, hold {{KEY|Shift}} and the right mouse button, then move the pointer.
|Rotate_view_text=Hold the left mouse button, then move the pointer.


Alternatively, and when a sketch is in edit mode, hold the middle mouse button, then press and hold the right mouse button, then move the pointer.
[[clipping plane|Rovina řezu]] je dobrý příklad objektu s manipulátory. [[clipping plane|Rovina řezu]] může být aktivována v menu ''Pohled→Rovina řezu''. Po aktivaci roviny řezu se objekt zobrazí a ukáže sedm dobře viditelných manipulátorů jako malé okénka: Jeden na každém konci tří souřadnicových os a jeden ve středu roviny kolmé osy. Jsou tam ješte další čtyři méně zřetelné manipulátory: Rovina sama a tenká část tří objektů os.
}}


=== Revit navigation ===
;Změna měřítka: Pro změnu měřítka klikněte levým tlačítkem myši na okénko manipulátoru na konci osy a tahejte s ním dopředu a dozadu. V závislosti na objektu pracují manipulátory buď nezívisle nebo synchronně.
;Posuny mimo rovinu: Pro posunování objektu podle kolmého vektoru táhněte dlouhé okénko u středu osy levým tlačítkem myši. Pro rovinu řezu je zde pouze jeden manipulátor podle kolmého vektoru.
;Posuny v rovině: Pro posunutí středu roviny řezu klikněte na objekt roviny a přetáhněte jej na požadované umístění.


The Revit navigation style was modeled after [https://en.wikipedia.org/wiki/Autodesk_Revit Revit].

{{Revit Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Shift={{KEY|Shift}}
|Select_text=Press the left mouse button over an object you want to select.
|Pan_text=Hold the middle mouse button, then move the pointer.

Alternatively, hold both left and right mouse buttons, then move the pointer.

|Zoom_text=Use the mouse wheel to zoom in and out.
|Rotate_view_text=Hold {{KEY|Shift}} and the middle mouse button, then move the pointer.

Alternatively, hold the middle mouse button, then press and hold the right mouse button, then move the pointer.
}}

=== TinkerCAD navigation ===

The TinkerCAD navigation style was modeled after [https://en.wikipedia.org/wiki/Tinkercad TinkerCAD].

{{Version|0.20}}

{{TinkerCAD Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Select_text=Press the left mouse button over an object you want to select.
|Pan_text=Hold the middle mouse button, then move the pointer.
|Zoom_text=Use the mouse wheel to zoom in and out.
|Rotate_view_text=Press the right mouse button, then move the pointer.
}}

<span id="Touchpad_navigation"></span>
<div class="mw-translate-fuzzy">
=== Touchpad Navigation ===
</div>

With the Touchpad navigation style, panning, zooming, and rotating the view require a modifier key together with the touchpad. This style can also be used with a mouse.

<div class="mw-translate-fuzzy">
V Touchpad Navigaci, bez snímání, zoomování, a otáčení pohledu, jsou pouze operace s myší (nebo touchpadem).
{{Touchpad Navigation/cs}}
{{Touchpad Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view
|Shift={{KEY|Shift}}
|Ctrl={{KEY|Ctrl}}
|Alt={{KEY|Alt}}
|PageUp={{KEY|PageUp}}
|PageDown={{KEY|PageDown}}
|Select_text=Press the left mouse button over an object you want to select.
|Pan_text=Hold {{KEY|Shift}}, then move the pointer.
|Zoom_text=Use {{KEY|PageUp}} and {{KEY|PageDown}} to zoom in and out.
|Zoom_alt_text=Alternatively, hold {{KEY|Shift}} and {{KEY|Ctrl}}, then move the pointer.
|Rotate_view_text=Hold {{KEY|Alt}}, then move the pointer.
|Rotate_view_alt_text=Alternatively, hold {{KEY|Shift}} and the left button, then move the pointer.
}}
</div>

<span id="Hardware_support"></span>
== Podpora hardwaru ==
== Podpora hardwaru ==


<div class="mw-translate-fuzzy">
FreeCAD also supports some [[3D input devices]].
FreeCAD také podporuje některé [[3D input devices/cs|3D vstupní zařízení]].
</div>


<span id="Recommended_navigation_for_macOS"></span>
== Mac OS X Issues ==
<div class="mw-translate-fuzzy">
== Mac OS X problémy ==
</div>


<div class="mw-translate-fuzzy">
Recently we got reports [http://forum.freecadweb.org/viewtopic.php?f=3&t=3592&start=0 on the forum] from Mac users that those mouse button and key combination do not work as expected. Unfortunately, none of the developers owns a Mac, neither do the other regular contributors. We need your help to determine which mouse buttons and key combination work so we can update this wiki.
Nedávno jsme dostali oznámení [http://forum.freecadweb.org/viewtopic.php?f=3&t=3592&start=0 na fóru] od uživatelů Mac, že uvedená tlačítka myši a kombinace kláves nefungují podle očekávání. Bohužel žádný z vývojářů nevlastní Mac a ani žádný zpravidelných spolupracovníků. Potřebujeme Vaši pomoc ke zjištění která tlačítka myši a klávesové kombinace mají uvedené problémy abychom mohli aktualizovat tuto stránku wiki.
</div>


== Developing a custom navigation ==
{{docnav|Getting started|Document structure}}


The tutorial [[Adding_a_new_mouse_navigation_option_to_FreeCAD|Adding a new mouse navigation option to FreeCAD]] orients developers who want to develop a custom mouse navigation option. Familiarity with the C++ syntax is required.
[[Category:User Documentation]]

<languages/>

{{docnav/cs|[[Getting started/cs|Zacínáme]]|[[Document structure/cs|Struktura dokumentu]]}}

{{Userdocnavi{{#translation:}}}}

Latest revision as of 13:46, 24 March 2024

Overview

"Model myši" ve FreeCADu obsahuje příkazy používané k vizuální navigaci ve 3D prostoru a interakci se zobrazenými objekty. FreeCAD podporuje vícenásobný model navigačních stylů myši. Defaultní navigační styl je označován jako "CAD navigace" a je velmi jednoduchý a praktický, ale FreeCAD také poskytuje alternativní navigační styly, které si můžete vubrat podle Vašich požadavků.

For more information about selecting objects see Selection methods.

For more information about manipulating objects see Std TransformManip.

Selecting a navigation style

  • V sekci Display (Zobrazení) Editoru Předvoleb, záložka 3D Pohled;
  • Kliknutím pravého tlačítka myši v prázdném prostoru v oblasti 3D pohledu a potom výběrem "Navigačního stylu" v kontextuálním menu.

Available navigation styles

With all navigation styles, unless selecting objects from a sketch in edit mode, you must hold Ctrl to select multiple objects.

Blender Navigation

The Blender navigation style was modeled after Blender.

V Blender Navigaci, vytvářené podle Blenderu, není snímání (kamerou) pouze myší. Při snímání pohledu kamerou musíte držet klávesu SHIFT.

Select Pan Zoom Rotate View
to Select shift+to Pan or to Zoom in or out to Rotate
Press the left mouse button over an object you want to select. Hold shift and click the middle mouse button and move the object around, or hold down the Left and Right buttons and move. Use the mouse wheel to zoom in and out. Click and drag with the middle mouse button.
Select Pan Zoom Rotate view
Shift+
Press the left mouse button over an object you want to select. Hold Shift and the middle mouse button, then move the pointer.

Alternatively, hold both left and right mouse buttons, and then move the pointer.

Use the mouse wheel to zoom in and out. Hold the middle mouse button, then move the pointer.

Alternatively, hold both left and right mouse buttons, and then move the pointer. |Zoom_text=Use the mouse wheel to zoom in and out. |Rotate_view_text=Hold the middle mouse button, then move the pointer. }}

CAD navigation

CAD Navigace (default)

Je to defaultní navigační styl, který umožňuje uživateli jednoduchou kontrolu nad pohledem a nepožaduje používání klávesnice, kromě vícenásobného výběru.

Výběr Pan Zoom Otáčení pohledem Otáčení pohledem

Alternativní Methoda

to Select to Pan to Zoom in or out to Rotate view to Rotate view
Stiskněte levé tlačítko myši nad objektem, který chcete vybrat. Podržení klávesy CTRL umožňuje současný výběr více objektů. Klikněte na střední tlačítko a pohybujte objektem kolem pan Kolečko myši používejte pro zoomování (zvětšení nebo zmenšení měřítka). Klikněte na prostřední tlačítko, podržte je stisknuté a potom klikněte na levé tlačítko myši a táhněte myší v požadovaném směru. Umístění kurzovu v době stisknutí prostředního tlačítka určuje střed rotace. Otáčení funguje jako rotace míče, který se otáčí podle svého středu. Pokud jsou tlačítka uvolněna před zastavením pohybu myši, objekt pokračuje v otáčení, pokud je to umožněno. Dvojklik prostředním tlačítkem nastaví nový střed otáčení. Klikněte na prostřední tlačítko, podržte je stisknuté a potom klikněte na pravé tlačítko myši a táhněte myší v požadovaném směru. Tato metoda pracuje stejně jako dříve popsaná metoda se stiskem prostředního tlačítka a levého tlačítka, s tím rozdílem, že prostřední tlačítko může být uvolněno hned po stisknutí pravého tlačítka. Pro uživatele, kteří používají myš pravou rukou může být tento způosob otáčení příjemnější než předchozí metoda.
Select Pan Zoom Rotate view
First method
Rotate view
Alternate method
Press the left mouse button over an object you want to select.

Holding down Ctrl allows the selection of multiple objects.

Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Clicking the middle mouse button re-centers the view on the location of the cursor.

Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

The cursor location when the middle mouse button is pressed determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the view continues spinning, if this is enabled.

A double click with the middle mouse button sets a new center of rotation.

Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

With this method the middle mouse button may be released after the right mouse button is held pressed.

Users who use the mouse with their right hand may find this method easier than the first method.

Ctrl+ Ctrl+Shift+ Shift+
Pan mode: hold the Ctrl key, press the right mouse button once, then move the pointer. introduced in version 0.17 Zoom mode: hold the Ctrl and Shift keys, press the right mouse button once, then move the pointer. introduced in version 0.17 Rotate mode: hold the Shift key, press the right mouse button once, then move the pointer. introduced in version 0.17
Select Pan Zoom Rotate view
First method
Rotate view
Alternate method
Press the left mouse button over an object you want to select. Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Clicking the middle mouse button re-centers the view on the location of the cursor.

Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

If the buttons are released before you stop the mouse motion, the view continues spinning, if this is enabled.

A double click with the middle mouse button sets a new center of rotation.

Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

With this method the middle mouse button may be released after the right mouse button is held pressed.

Users who use the mouse with their right hand may find this method easier than the first method.

Ctrl+ Ctrl+Shift+ Shift+
Pan mode: hold the Ctrl key, press the right mouse button once, then move the pointer. Zoom mode: hold the Ctrl and Shift keys, press the right mouse button once, then move the pointer. Rotate mode: hold the Shift key, press the right mouse button once, then move the pointer.

Gesture Navigation (v0.16)

This style was tailored for use with a touchscreen and pen. Nevertheless, it can also be used with a mouse, and is recommended for use when using a Mac with a trackpad.

This navigation style was tailored for usability with touchscreen and pen, but is very usable with mouse too.

Select Pan Zoom Rotate view Tilt view
Press the left mouse button over an object you want to select. Hold the right mouse button, then move the pointer. Use the mouse wheel to zoom in and out. Hold the left mouse button, then move the pointer.

In Sketcher and other edit modes, this behavior is disabled. Hold Alt when pressing the mouse button to enter rotation mode.

To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press H on the keyboard.

Hold both left and right mouse buttons, and then move the pointer sideways.
Tap to select. Drag with two fingers.

Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button.

Drag two fingers (pinch) closer or farther apart. Drag with one finger to rotate.

Hold Alt when in the Sketcher.

Rotate the imaginary line formed by two touch points.

On v0.18 this method is disabled by default. To enable, go to Edit → Preferences → Display, and untick "Disable touchscreen tilt gesture" checkbox.

Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button. |Zoom_text=Use the mouse wheel to zoom in and out. |Zoom_gesture_text=Drag two fingers (pinch) closer or farther apart. |Rotate_view_text=Hold the left mouse button, then move the pointer. In Sketcher and other edit modes, this behavior is disabled. Hold Alt when pressing the mouse button to enter rotation mode.

To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press H on the keyboard. |Rotate_view_gesture_text=Drag with one finger to rotate.

Hold Alt when in the Sketcher. |Tilt_view_text=Hold both left and right mouse buttons, then move the pointer sideways. |Tilt_view_gesture_text=Rotate the imaginary line formed by two touch points.

This method is disabled by default. To enable, go to Edit → Preferences → Display → Navigation, and uncheck the "Disable touchscreen tilt gesture" checkbox. }}

Maya-Gesture Navigation

In Maya-Gesture Navigation, panning, zooming, and rotating the view require the Alt key together with a mouse button; therefore, a three-button mouse is required. It's also possible to use gestures as this style was developed over the Gesture navigation style.

In Maya-Gesture Navigation, all view movements are activated pressing ALT and a mouse button, so that it will be needed to have a 3 button mouse in order to correctly use this navigation mode. Alternately it's possible to use gestures as this mode was been developed over the normal Gesture Navigation mode.

Select Pan Zoom Rotate view
Alt+ Alt+ Alt+
Press the left mouse button over an object you want to select. Hold Alt and the middle mouse button, then move the pointer. Hold Alt and the right mouse button, then move the pointer.

Alternatively, use the mouse wheel to zoom in and out.

Hold Alt and the left mouse button, then move the pointer.

Alternatively, use the mouse wheel to zoom in and out. |Rotate_view_text=Hold Alt and the left mouse button, then move the pointer. }}

OpenCascade navigation

The OpenCascade navigation style was modeled after OpenCascade.

Select Pan Zoom Rotate view
Ctrl+ Ctrl+ Ctrl+


Press the left mouse button over an object you want to select. Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Alternatively, hold Ctrl and the left mouse button, then move the pointer.

Hold Ctrl and the right mouse button, then move the pointer.

OpenInventor navigation

Inventor Navigation (Tvůrčí navigace)

Tvůrčí navigace, vytvářená podle Open Inventor (nezaměňovat s Autodesk Inventor), kde se nepoužívá pouze výběr myší. Při vybírání objektů musíte držet stisknutou klávesu CTRL.

Select Pan Zoom Rotate View
ctrl +to Select to Pan to Zoom in or out or to Zoom in or out to Rotate
Hold ctrl and press the left mouse button over an object you want to select. Click the left mouse button and move the object around. Use the mouse wheel to zoom in and out, or click and hold the middle mouse button and click the left mouse button. Click and drag with the left mouse button to rotate
Select Pan Zoom Rotate view
{{{Shift}}}+
Hold Ctrl, then press the left mouse button over an object you want to select. Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Alternatively, hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

Hold the left mouse button, then move the pointer.

This style is not based on Autodesk Inventor.

Select Pan Zoom Rotate view
Shift+
Hold Shift, then press the left mouse button over an object you want to select.

Hold Ctrl instead to select multiple objects.

Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Alternatively, hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

Hold the left mouse button, then move the pointer.

OpenSCAD navigation

The OpenSCAD navigation style was modeled after OpenSCAD.

introduced in version 0.20

Select Pan Zoom Rotate view
Shift+
Press the left mouse button over an object you want to select.

version 0.21 and below Hold Ctrl and Shift when pressing the mouse button to drag an object in a sketch in edit mode.

Hold the right mouse button, then move the pointer. Hold the middle mouse button, then move the pointer.

Alternatively, hold Shift and the right mouse button, then move the pointer.

Hold the left mouse button, then move the pointer.

Alternatively, and when a sketch is in edit mode, hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

Revit navigation

The Revit navigation style was modeled after Revit.

Select Pan Zoom Rotate view
Shift+


Press the left mouse button over an object you want to select. Hold the middle mouse button, then move the pointer.

Alternatively, hold both left and right mouse buttons, then move the pointer.

Use the mouse wheel to zoom in and out. Hold Shift and the middle mouse button, then move the pointer.

Alternatively, hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

TinkerCAD navigation

The TinkerCAD navigation style was modeled after TinkerCAD.

introduced in version 0.20

Select Pan Zoom Rotate view
Press the left mouse button over an object you want to select. Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out. Press the right mouse button, then move the pointer.

Touchpad Navigation

With the Touchpad navigation style, panning, zooming, and rotating the view require a modifier key together with the touchpad. This style can also be used with a mouse.

V Touchpad Navigaci, bez snímání, zoomování, a otáčení pohledu, jsou pouze operace s myší (nebo touchpadem).

Select Pan Zoom Rotate View
to Select shift+to Pan PgUp / PgDn alt+to Rotate
Press the left mouse button over an object you want to select. Hold shift and move the object around. Use PgUp and PgDn to zoom in and out. Hold alt and move the pointer.
or or
shift+ctrl+to Zoom shift+ctrl+to ROtate
Hold down both the shift and the ctrl keys, press the left mouse button, and move the pointer. Hold down both the shift and the ctrl keys and move the pointer.
Select Pan Zoom Rotate view
Shift+ PageUp, PageDown Alt+
Press the left mouse button over an object you want to select. Hold Shift, then move the pointer. Use PageUp and PageDown to zoom in and out. Hold Alt, then move the pointer.
Ctrl+Shift+ Shift+
Alternatively, hold Shift and Ctrl, then move the pointer. Alternatively, hold Shift and the left button, then move the pointer.

Podpora hardwaru

FreeCAD také podporuje některé 3D vstupní zařízení.

Mac OS X problémy

Nedávno jsme dostali oznámení na fóru od uživatelů Mac, že uvedená tlačítka myši a kombinace kláves nefungují podle očekávání. Bohužel žádný z vývojářů nevlastní Mac a ani žádný zpravidelných spolupracovníků. Potřebujeme Vaši pomoc ke zjištění která tlačítka myši a klávesové kombinace mají uvedené problémy abychom mohli aktualizovat tuto stránku wiki.

Developing a custom navigation

The tutorial Adding a new mouse navigation option to FreeCAD orients developers who want to develop a custom mouse navigation option. Familiarity with the C++ syntax is required.