Siatka: Wygładź
Mesh Smoothing |
Menu location |
---|
Meshes → Smooth... |
Workbenches |
Mesh |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The Mesh Smoothing command smooths mesh objects by changing the position of their vertices.
The Smoothing task panel after choosing the Only selection option
Usage
- If you plan to smooth only certain areas, note that the command uses the color red to mark the faces selected for this option. To see them properly:
- The WIDOKDisplay Mode of the mesh objects ideally should be
Flat lines
, but should at least show faces. If necessary use the Std DrawStyle command to override this property. - The WIDOKShape Color of the mesh objects should not be red.
- The WIDOKDisplay Mode of the mesh objects ideally should be
- Select one or more mesh objects.
- There are several ways to invoke the command:
- Press the Mesh Smoothing button.
- Select the Meshes → Smooth... option from the menu.
- The Smoothing task panel opens.
- If you only want to smooth selected areas: choose the Only selection option:
- The Selection panel is added to the task panel.
- Specify the region options:
- Respect only visible triangles
- Respect only triangles with normals facing screen
- Press the Add button and while holding down the left mouse button draw a region, a closed spline, in the 3D view. Faces that match the region options and (partially) fall inside the region will be selected.
- Optionally press the Clear button to clear the selection.
- Select the smoothing Method:
- Taubin
- Laplace
- Specify the Parameters:
- Iterations: the higher this number the smoother the final result. The value also has an impact on the total processing time of the command. Avoid high values if the mesh objects have many points.
- λ: the value must be in the
0
-1
range. - μ: the value must be in the
0
-1
range.
- Press the OK button to finish the command.
Środowisko pracy Siatka
- Różności: Import siatki, Eksport siatki, Siatka z kształtu, Utwórz bryłę regularną, Rozwiń siatkę, Rozwiń powierzchnię
- Modyfikacja: Ujednolicenie wektorów normalnych, Odwróć wektory normalne, Wypełnij otworów, Wypełnij interaktywnie otwory, Dodaj element, Usuń elementy, Usuń interaktywnie elementy, Wygładzanie, Uprość przez Gmsh, Uprość, Skala
- Logiczne: Połączenie, Przecięcie, Różnica
- Krojenie: Przetnij, Przytnij, Przytnij siatkę płaszczyzną, Przekrój płaszczyzną, Wiele przekrojów
- Części składowe i segmenty: Scal, Rozbij na komponenty, Utwórz segment siatki, Tworzenie segmentów siatki z najlepiej dopasowanych powierzchni
Centrum użytkownika
- Jak zacząć
- Instalacja: Pobieranie programu, Windows, Linux, Mac, Dodatkowych komponentów, Docker, AppImage, Ubuntu Snap
- Podstawy: Informacje na temat FreeCAD, Interfejs użytkownika, Profil nawigacji myszką, Metody wyboru, Nazwa obiektu, Edytor ustawień, Środowiska pracy, Struktura dokumentu, Właściwości, Pomóż w rozwoju FreeCAD, Dotacje
- Pomoc: Poradniki, Wideo poradniki
- Środowiska pracy: Strona Startowa, Architektura, Assembly, CAM, Rysunek Roboczy, MES, Inspekcja, Siatka, OpenSCAD, Część, Projekt Części, Punkty, Inżynieria Wsteczna, Robot, Szkicownik, Arkusz Kalkulacyjny, Start, Powierzchnia 3D, Rysunek Techniczny, Test Framework, Web