Все верстаки одним взглядом
- Введение
- Открываем для себя FreeCAD
- Работа с FreeCAD
- Все верстаки одним взглядом
- Традиционное моделирование методом КБГ
- Традиционное двумерное черчение
- Моделирование для проектирования продукта
- Подготовка для объёмной печати
- Создание двумерных чертежей
- Моделирование BIM
- Использование электронных таблиц
- Создание анализа методом конечных элементов
- Визуализация проекта
- Написание скриптов на Python
- Сообщество
Главная сложность новых пользователей FreeCAD - узнать, в каком верстаке найти нужный инструмент. Расположенная ниже таблица даст Вам обзор наиболее важных верстаков и их инструментов. Более полный список верстаков смотрите в документации FreeCAD.
Четыре верстака так же разработаны для работы в парах, и один из них полностью включён в другой: верстак Arch содержит все инструменты Draft, а PartDesign - все инструменты Sketcher. Тем не менее, для ясности они разделены ниже.
Part
Верстак Part предоставляет базовые инструменты для работы с твердотельными частями: примитивами, такими как куб или сфера, и простыми геометрическими и булевыми операциями. Будучи основной точкой привязки к OpenCasCade, верстак Part обеспечивает основу геометрической системы FreeCAD, и почти все другие верстаки производят геометрию, базируемую на Part.
Инструмент | Описание | Инструмент | Описание |
---|---|---|---|
Box | Рисует параллелепипед | Cone | Рисует конус |
Cylinder | Рисует цилиндр | Sphere | Рисует сферу |
Torus | Рисует тор (кольцо) | Create primitives | Создаёт различные параметрические примитивы по выбору |
Shape builder | Создаёт сложные формы из примитивов | Union | Объединяет два объекта |
Common | Выделяет общую часть (пересечение) двух объектов | Cut | Вычитает один объект из другого |
JonConnect | Connects interiors of walled objects | JoinEmbed | Embeds a walled object into another walled object |
Join Cutout | Creates a cutout in a wall of an object for another walled object | Extrude | Extrudes planar faces of an object |
Fillet | Скругляет грани объекта | Revolve | Создаёт твёрдое тело поворотом другого объекта (не твердотельного) вокруг оси |
Section | Создаёт сечение объекта секущей плоскостью | SectionCross | Создаёт несколько пересечений объекта |
Chamfer | Создаёт скос (фаску) граней объекта | Mirror | Отражает выбранный объект заданной отражающей плоскостью |
Ruled Surface | Create a ruled surface between selected curves | Sweep | Sweeps one or more profiles along a path |
Part Loft | Создаёт объект через операцию лофтинга между двумя профилями | Offset | Создаёт увеличенную копию оригинального объекта |
Thickness | Назначает толщину граням формы |
Draft
Верстак Draft обеспечивает инструменты для базовых задач двумерных САПР: линии, окружности и так далее, и серия общеупотребительных инструментов вроде перемещения, вращения или масштабирования. Он так же обеспечивает несколько вспомогательных инструментов, вроде сетки и привязки. Это принципиально означает рисовать направляющие для архитектурных объектов, но так же служит "швейцарским ножом" для FreeCAD .
Инструмент | Описание | Инструмент | Описание |
---|---|---|---|
Line | Рисует отрезок между двумя точками | Wire | Рисует линию, составленную из нескольких линейных сегментов (полилиния) |
Circle | Рисует окружность по центру и радиусу | Arc | Рисует сегмент дуги по центру, радиусу, начальному и конечному углу |
Ellipse | Рисует эллипс по двум угловым точкам | Polygon | Рисует правильный многоугольник по центру и радиусу |
Rectangle | Рисует прямоугольник по двум противоположным точкам | Text | Рисует многострочную текстовую аннотацию |
Dimension | Рисует размерные линии | BSpline | Рисует B-сплайн из последовательности точек |
Point | Вставляет одиночную точку | Shapestring | Вставляет сложную форму, представляющую собой текстовую строку в заданной точке текущего документа |
Facebinder | Создаёт новый объект из выбранных граней существующих объектов | Bezier Curve | Рисует кривую Безье по последовательности точке |
Move | Перемещает или копирует объекты из одного места в другое | Rotate | Вращает объекты на определённый угол вокруг точки |
Offset | Создаёт смещение объекта на некоторую дистанцию | Trimex | Обрезает, удлиняет или вытягивает объект |
Upgrade | Превращает или соединяет объекты в объекты более высокого уровня | Downgrade | Превращает или разделяет объекты в объекты более низкого уровня |
Scale | Масштабирует объекты относительно точки | Shape 2D View | Создаёт двумерный объект с плоским видом другого объекта |
Draft to Sketch | Преобразует объект Draft в объект Sketch (эскиз) и наоборот | Array | Создаёт из объекта полярный или прямоугольный массив |
Path Array | Создаёт массив из объекта, помещая его вдоль трассы | Clone | Создаёт связанные копии объектов |
Mirror | Отражает объекты вдоль линии |
Sketcher
Верстак Sketcher содержит инструменты для создания и редактирования сложных двумерных объектов, называемых эскизами (sketch). Геометрия внутри этих эскизов может быть точно позиционирована и связана использованием ограничений. Это создано в первую очередь для создания блоков в геометрии PartDesign, но может быть полезно в любом месте FreeCAD.
Инструмент | Описание | Инструмент | Описание |
---|---|---|---|
Point | Рисует точку | Line | Рисует отрезок по двум точкам |
Arc | Рисует отрезок дуги по центру, радиусу, начальному и конечному углу | Arc 3 points | Рисует отрезок дуги по двум конечным точкам и третьей точке на окружности |
Circle | Рисует окружность по центру и радиусу | Circle 3 points | Рисует окружность по трём точкам на ней |
Ellipse | Рисует эллипс по центральной точке, и точкам большого и малого радиуса | Ellipse 3 points | Рисует эллипс по главному диаметру (две точки) и точке малого радиуса |
Arc of ellipse | Рисует дугу эллипса по центральной точке, точке большого радиуса и начальной и конечной точке | Polyline | Рисует линию, состоящую из нескольких отрезков. Доступно несколько режимов рисования |
Rectangle | Рисует прямоугольник по двум противоположным точкам | Triangle | Рисует равносторонний треугольник, вписанный в круг конструктивной геометрии |
Square | Рисует равносторонний прямоугольник, вписанный в круг конструктивной геометрии | Pentagon | Рисует равносторонний пятиугольник, вписанный в круг конструктивной геометрии |
Hexagon | Рисует равносторонний шестиугольник, вписанный в круг конструктивной геометрии | Heptagon | Рисует равносторонний семиугольник, вписанный в круг конструктивной геометрии |
Octagon | Рисует равносторонний восьмиугольник, вписанный в круг конструктивной геометрии | Slot | Рисует овал выбором центра одного из полукругов и конечной точки другого полукруга |
Fillet | Makes a fillet between two lines joined at one point | Trimming | Trims a line, circle or arc with respect to a clicked point |
External geometry | Creates an edge linked to external geometry | Construction mode | Toggles an element to/from construction mode. A construction object will not be used in a 3D geometry operation and is only visible while editing the Sketch that contains it |
Point on point | Affixes a point onto (coincident with) one or more other points. | Point on object | Affixes a point onto another object such as a line, arc, or axis. |
Vertical | Constrains the selected lines or polyline elements to a true vertical orientation. More than one object can be selected before applying this constraint. | Horizontal | Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint. |
Parallel | Constrains two or more lines parallel to one another. | Perpendicular | Constrains two lines perpendicular to one another, or constrains a line perpendicular to an arc endpoint. |
Tangent | Creates a tangent constraint between two selected entities, or a co-linear constraint between two line segments. | Equal length | Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal. |
Symmetric | Constrains two points symmetrically about a line, or constrains the first two selected points symmetrically about a third selected point. | Lock | Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item |
Horizontal distance | Fixes the horizontal distance between two points or line endpoints. If only one item is selected, the distance is set to the origin. | Vertical distance | Fixes the vertical distance between 2 points or line endpoints. If only one item is selected, the distance is set to the origin. |
Length | Defines the distance of a selected line by constraining its length, or defines the distance between two points by constraining the distance between them. | Radius | Defines the radius of a selected arc or circle by constraining the radius. |
Internal anglr | Defines the internal angle between two selected lines. | Snell's law | Constrains two lines to obey a refraction law to simulate the light going through an interface |
Internal alignment | Aligns selected elements to selected shape (e.g. a line to become major axis of an ellipse) | Map sketch | Maps a sketch to the previously selected face of a solid |
Merge | Merge two or more sketches | Mirror | Mirrors selected elements of a sketch |
Part Design
The Part Design Workbench contains advanced tools to build solid parts. It also contains all the tools from the sketcher. Since it can only produces solid shapes (the rule number one of Part Design), it is the main workbench to use when designing pieces (parts) to be manufactured or 3D-printed, as you will always obtain a printable object.
Tool | Description | Tool | Description |
---|---|---|---|
Pad | Extrudes a solid object from a selected sketch | Creates a pocket from a selected sketch. The sketch must be mapped to an existing solid object's face | |
Revolution | Creates a solid by revolving a sketch around an axis | Groove | Creates a groove by revolving a sketch around an axis |
Fillet | Fillets (rounds) edges of an object | Chamfer | Chamfers edges of an object |
Draft | Applies angular draft to faces of an object | Mirrored | Mirrors features on a plane or face |
Linear pattern | Creates a linear pattern of features | Polar pattern | Creates a polar pattern of features |
Scaled | Scales features to a different size | Multitransform | Allows creating a pattern with any combination of the other transformations |
Shaft wizard | Generates a shaft from a table of values and allows to analyze forces and moments | Involute gear wizard | Allows you to create several types of gears |
Arch
The Arch Workbench contains tools to work with BIM projects (civil engineering and architecture). It also contains all the tools from the Draft workbench. The main use of the Arch Workbench is to create BIM objects or give BIM attributes to objects built with other workbenches, in order to export them to IFC.
Tool | Description | Tool | Description |
---|---|---|---|
Wall | Creates a wall from scratch or using a selected object as a base | Structure | Creates a structural element from scratch or using a selected object as a base |
Rebar | Creates a reinforcement bar in a selected structural element | Floor | Creates a floor including selected objects |
Building | Creates a building including selected objects | Site | Creates a site including selected objects |
Window | Creates a window using a selected object as a base | Section plane | Adds a section plane object to the document |
Axis | Adds an axes system to the document | Roof | Creates a sloped roof from a selected face |
Space | Creates a space object in the document | Stairs | Creates a stairs object in the document |
Panel | Creates a panel object from a selected 2D object | Frame | Creates a frame object from a selected layout |
Equipment | Creates an equipment or furniture object | Material | Attributes a material to selected objects |
Schedule | Creates different types of schedules | Cut plane | Cut an object according to a plan |
Add | Adds objects to a component | Remove | Subtracts or removes objects from a component |
Survey | Enters or leaves surveying mode |
Drawing
The Drawing Workbench handles the creation and manipulation of 2D drawing sheets, used for displaying views of your 3D work in 2D. These sheets can then be exported to 2D applications in SVG or DXF formats, to a PDF file or printed.
Tool | Description | Tool | Description |
---|---|---|---|
New sheet | Creates a new drawing sheet | View | Inserts a view of the selected object in the active drawing sheet |
Annotation | Adds an annotation to the current drawing sheet | Clip | Adds a clip group to the current drawing sheet |
Open browser | Opens a preview of the current sheet in the browser | Ortho views | Automatically creates orthographic views of an object on the current drawing sheet |
Symbol | Adds the contents of a SVG file as a symbol on the current drawing sheet | Draft view | Inserts a special Draft view of the selected object in the current drawing sheet |
Save | Saves the current sheet as a SVG file |
Прочие встроенные верстаки
Although the above summarizes the most important tools of FreeCAD, many more workbenches are available, among them:
- The Mesh Workbench allows to work with polygon meshes. Although meshes are not the preferred type of geometry to work with in FreeCAD, because of their lack of precision and support for curves, meshes still have a lot of uses, and are fully supported in FreeCAD. The Mesh Workbench also offers a number of Part-to-Mesh and Mesh-to-Part tools.
- The Raytracing Workbench offers tools to interface with external renderers such as povray or luxrender. Right from inside FreeCAD, this workbench allows you to produce high-quality renderings from your models.
- The Spreadsheet Workbench permits the creation and manipulation of spreadsheet data, that can be extracted from FreeCAD models. Spreadsheet cells can also be referenced in many areas of FreeCAD, allowing to use them as master data structures.
- The FEM Workbench deals with Finite Elements Analysis, and permits the performing of pre- and post-processing FEM calculations and to display the results graphically.
Внешние верстаки
A number of other very useful workbenches produced by FreeCAD community members also exist. Although they are not included in a standard FreeCAD installation,they are easy to install as plug-ins. They are all referenced in the FreeCAD-addons repository. Among the most developed are:
- The Drawing Dimensioning Workbench offers many new tools to work directly on Drawing Sheets and allow you to add dimensions, annotations and other technical symbols with great control over their aspect.
- The Fasteners Workbench offers a wide range of ready-to-insert fasteners objects like screws, bolts, rods, washers and nuts. Many options and settings are available.
- The Assembly2 Workbench offers a series of tools to mount and work with assemblies.
Читать далее