Manual:All workbenches at a glance/de: Difference between revisions
No edit summary |
No edit summary |
||
Line 13: | Line 13: | ||
Vier Arbeitsbereiche sind ebenfalls für die Arbeit in Paaren ausgelegt, wobei einer von ihnen vollständig in den anderen integriert ist: Arch enthält alle Entwurfswerkzeuge und PartDesign alle Skizzierer-Werkzeuge. Aus Gründen der Übersichtlichkeit sind sie jedoch unten getrennt. |
Vier Arbeitsbereiche sind ebenfalls für die Arbeit in Paaren ausgelegt, wobei einer von ihnen vollständig in den anderen integriert ist: Arch enthält alle Entwurfswerkzeuge und PartDesign alle Skizzierer-Werkzeuge. Aus Gründen der Übersichtlichkeit sind sie jedoch unten getrennt. |
||
=== |
=== Part === |
||
Dieser Arbeitsbereich lässt sich als Basis-Bereich von FreecCAD (ähnlich wie in anderen CAD-Programmen) auffassen. In ihm werden Körper (Solids) mittels Boole'schen Verknüpfungen aus "vorgefertigten" geometrischen Grundkörpern (primitives), die einer Teilebibliothek entnommen werden, modelliert und auf einfachere Weise, z.B. Kanten brechen (abschrägen oder verrunden), weiter bearbeitet. Hier sind auch Werkzeuge angesiedelt, mit denen Körper aus Umrandungen erzeugt werden, z.B. durch Extrudieren geschlossener Kurven. In fast allen anderen Arbeitsbereichen wird der Schlussarbeit im Arbeitsbereich Körper zugearbeitet, z.B. duch Erzeugen der genannten Umrandungen. |
Dieser Arbeitsbereich lässt sich als Basis-Bereich von FreecCAD (ähnlich wie in anderen CAD-Programmen) auffassen. In ihm werden Körper (Solids) mittels Boole'schen Verknüpfungen aus "vorgefertigten" geometrischen Grundkörpern (primitives), die einer Teilebibliothek entnommen werden, modelliert und auf einfachere Weise, z.B. Kanten brechen (abschrägen oder verrunden), weiter bearbeitet. Hier sind auch Werkzeuge angesiedelt, mit denen Körper aus Umrandungen erzeugt werden, z.B. durch Extrudieren geschlossener Kurven. In fast allen anderen Arbeitsbereichen wird der Schlussarbeit im Arbeitsbereich Körper zugearbeitet, z.B. duch Erzeugen der genannten Umrandungen. |
Revision as of 14:50, 19 January 2020
- Einführung
- FreeCAD entdecken
- Arbeiten mit FreeCAD
- Alle Arbeitsbereiche auf einen Blick
- Herkömmliche Modellierung, der CSG Weg
- Herkömmliches 2D Entwerfen
- Modellierung für Produktdesign
- Modelle für den 3D Druck vorbereiten
- Erstellen von 2D Zeichnungen
- BIM Modellierung
- Verwendung von Kalkulationstabellen
- Erstellen von FEM Analysen
- Erstellen von Bildsynthesen
- Skripte in Python erstellen
- Die Gemeinschaft
Eine der größten Schwierigkeiten für neue Benutzer von FreeCAD, ist zu wissen, in welchem Arbeitsbereich ein bestimmtes Werkzeug zu finden ist. Die folgende Tabelle gibt einen Überblick über die wichtigsten Arbeitsbereiche und deren Werkzeuge. Eine vollständigere Liste findest du auf jeder Seite Arbeitsbereich in der FreeCAD Dokumentation.
Vier Arbeitsbereiche sind ebenfalls für die Arbeit in Paaren ausgelegt, wobei einer von ihnen vollständig in den anderen integriert ist: Arch enthält alle Entwurfswerkzeuge und PartDesign alle Skizzierer-Werkzeuge. Aus Gründen der Übersichtlichkeit sind sie jedoch unten getrennt.
Part
Dieser Arbeitsbereich lässt sich als Basis-Bereich von FreecCAD (ähnlich wie in anderen CAD-Programmen) auffassen. In ihm werden Körper (Solids) mittels Boole'schen Verknüpfungen aus "vorgefertigten" geometrischen Grundkörpern (primitives), die einer Teilebibliothek entnommen werden, modelliert und auf einfachere Weise, z.B. Kanten brechen (abschrägen oder verrunden), weiter bearbeitet. Hier sind auch Werkzeuge angesiedelt, mit denen Körper aus Umrandungen erzeugt werden, z.B. durch Extrudieren geschlossener Kurven. In fast allen anderen Arbeitsbereichen wird der Schlussarbeit im Arbeitsbereich Körper zugearbeitet, z.B. duch Erzeugen der genannten Umrandungen. Die direkteste Beziehung zur FreeCAD zugrundeliegende Open Cascade Technology ( [1] ) besteht im Arbeitsbereich Körper.
Werkzeug | Beschreibung | Werkzeug | Beschreibung |
---|---|---|---|
Box | Bereitstellen eines Würfels | Cone | Bereitstellen eines Konus' |
Cylinder | Bereitstellen eines Zylinders | Sphere | Bereitstellen einer Kugel |
Torus | Bereitstellen eines Torus' | Create primitives | Kreieren verschiedener anderer geometrischer Grundkörper |
Shape builder | Kreieren einer koplexeren Gestalt eines geometrischen Grundkörpers | Union | Vereinigen zweier geometrischer Grundkörper |
Common | Erzeugen des Gemeinamen zweier geometrischer Grundkörper | Cut | Subtrahieren eines geometrischen Grundkörpers von einem anderen |
JonConnect | Connects interiors of walled objects | JoinEmbed | Embeds a walled object into another walled object |
Join Cutout | Creates a cutout in a wall of an object for another walled object | Extrude | Extrudes planar faces of an object |
Fillet | Fillets (rounds) edges of an object | Revolve | Creates a solid by revolving another object (not solid) around an axis |
Section | Creates a section by intersecting an object with a section plane | SectionCross | Creates multiple cross sections along an object |
Chamfer | Chamfers edges of an object | Mirror | Mirrors the selected object on a given mirror plane |
Ruled Surface | Create a ruled surface between selected curves | Sweep | Sweeps one or more profiles along a path |
Part_Loft | Lofts from one profile to another | Offset | Creates a scaled copy of the original object |
Thickness | Assign a thickness to the faces of a shape |
Draft
The Draft Workbench provides tools to do basic 2D CAD drafting tasks: lines, circles, etc... and a series of generic handy tools such as move, rotate or scale. It also provides several drawing aids, such as grid and snapping. It is principally meant to draw the guidelines for Arch objects, but also serves as FreeCAD's "swiss knife".
Tool | Description | Tool | Description |
---|---|---|---|
Line | Draws a line segment between 2 points | Wire | Draws a line made of multiple line segments (polyline) |
Circle | Draws a circle from center and radius | Arc | Draws an arc segment from center, radius, start angle and end angle |
Ellipse | Draws an ellipse from two corner points | Polygon | Draws a regular polygon from a center and a radius |
Rectangle | Draws a rectangle from 2 opposite points | Text | Draws a multi-line text annotation |
Dimension | Draws a dimension annotation | BSpline | Draws a B-Spline from a series of points |
Point | Inserts a single point | Shapestring | The ShapeString tool inserts a compound shape representing a text string at a given point in the current document |
Facebinder | Creates a new object from selected faces on existing objects | Bezier Curve | Draws a Bezier curve from a series of points |
Move | Moves or copies objects from one location to another | Rotate | Rotates objects by a certain angle around a point |
Offset | Offsets an object to a certain distance | Trimex | Trims, extends or extrudes an object |
Upgrade | Turns or joins objects into a higher-level object | Downgrade | Turns or separates objects into lower-level objects |
Scale | Scales objects in relation to a point | Shape 2D View | Creates a 2D object which is a flattened view of another object |
Draft to Sketch | Converts a Draft object to a Sketch and vice-versa | Array | Creates a polar or rectangular array from an object |
Path Array | Creates an array from an object by placing copies along a path | Clone | Creates linked copies of objects |
Mirror | Mirrors objects across a line |
Skizzieren
Unglücklicherweise gibt es in FreeCAD wenigstens 3 Arbeitsbereiche mit 3 verschiedenen Namen, obwohl in diesen Bereichen mit ähnlichen Werkzeug-Sets ähnliche Arbeit, nämlich Technisches Zeichnen stattfindet. Sowohl die deutschen als auch die englischen Begriffe Zeichnen (Sketch/er), Entwerfen (Draft) und Körper-Entwurf (PartDesign) sind folglich auch keine selbstsprechenden unterschiedlichen Bezeichnungen. Zudem findet Zeichnen in 2D ebenfalls im Arbeitsbereich Architektur (Arch) statt. Anstatt der wörtlichen Übersetzung von Sketch/er ins Deutsche mit Skizzieren/ierer wird Zeichnen gewählt, weil nicht das Skizzieren im Sinne von Freihand-Zeichnen gemeint ist. In diesem Arbeitsbereich kommen die meisten in 2D-Zeichenprogrammen benutzten Werkzeuge ebenfalls zur Anwendung. Im Werkzeug-Set ist zusätzlich eine Gruppe von Werkzeugen enthalten, mit deren Hilfe der Entwurf in Position, Form und Abmessungen eindeutig erstellt wird (siehe auch Constraint im Glossar).
Werkzeug | Beschreibung | Werkzeug | Beschreibung |
---|---|---|---|
Point | Zeichnen eine Punkts | Line | Zeichnen einer Linie, bestimmt von beiden Endpunkten |
Arc | Zeichnen eines Kreisbogens, bestimmt von Mittelpunkt, Radius und relativem Anfangs- und Endwinkel | Arc 3 points | Zeichnen eines Kreisbogens, bestimmt von 3 auf ihm liegenden Punkten
(2 der 3 Punkte sind die Endpunkte des Kreisbogens) |
Circle | Zeichnen eines Kreises, bestimmt von Mittelpunkt und Radius | Circle 3 points | Zeichnen eines Kreises, bestimmt von 3 auf ihm liegenden Punkten |
Ellipse | Zeichnen einer Ellipse, bestimmt von Mittelpunkt und je einem Endpunkt der beiden Ellipsenachsen | Ellipse 3 points | Zeichnen einer Ellipse, bestimmt von beiden Endpunkten der großen und einem Endpunkt der kleinen Ellipsenachse |
Arc of ellipse | Zeichnen eines elliptischen Bogens, bestimmt von Mittelpunkt, einem Endpunkt der großen Ellipsenachse und Anfangs- und Endpunkt | Polyline | Zeichnen eines aus mehreren geraden Linien bestehenden Linienzugs |
Rectangle | Zeichnen eines Rechtecks, bestimmt von zwei diagonal gegenüber liegenden Eckpunkten | Triangle | Zeichnen eines gleichseitigen Dreiecks, bestimmt vom Umkreis |
Square | Zeichnen eines gleichseitigen Dreiecks, bestimmt vom Innenkreis | Pentagon | Zeichnen eines gleichseitigen Vielecks, vom Umkreis bestimmt |
Hexagon | Zeichnen eines gleichseitigen Sechsecks, vom Umkreis bestimmt | Heptagon | Zeichnen eines gleichseitigen Siebenecks, vom Umkreis bestimmt |
Octagon | Zeichnen eines gleichseitigen Achtecks, vom Umkreis bestimmt | Slot | Zeichnen eines Ovals, vom Mittelpunkt, einem Halbkreis und dem äußersten Punkt des anderen Halbkreises bestimmt |
Fillet | Erzeugen einer Rundung an einer von zwei Linien gebildeten Ecke | Trimming | Kürzen einer Linie, eines Kreises oder eines Bogens mithilfe einer/s überlagernden Linie, Kreises oder Bogens |
External geometry | Creates an edge linked to external geometry | Construction mode | Toggles an element to/from construction mode. A construction object will not be used in a 3D geometry operation and is only visible while editing the Sketch that contains it |
Point on point | Affixes a point onto (coincident with) one or more other points. | Point on object | Affixes a point onto another object such as a line, arc, or axis. |
Vertical | Constrains the selected lines or polyline elements to a true vertical orientation. More than one object can be selected before applying this constraint. | Horizontal | Constrains the selected lines or polyline elements to a true horizontal orientation. More than one object can be selected before applying this constraint. |
Parallel | Constrains two or more lines parallel to one another. | Perpendicular | Constrains two lines perpendicular to one another, or constrains a line perpendicular to an arc endpoint. |
Tangent | Creates a tangent constraint between two selected entities, or a co-linear constraint between two line segments. | Equal length | Constrains two selected entities equal to one another. If used on circles or arcs their radii will be set equal. |
Symmetric | Constrains two points symmetrically about a line, or constrains the first two selected points symmetrically about a third selected point. | Lock | Constrains the selected item by setting vertical and horizontal distances relative to the origin, thereby locking the location of that item |
Horizontal distance | Fixes the horizontal distance between two points or line endpoints. If only one item is selected, the distance is set to the origin. | Vertical distance | Fixes the vertical distance between 2 points or line endpoints. If only one item is selected, the distance is set to the origin. |
Distance | Defines the distance of a selected line by constraining its length, or defines the distance between two points by constraining the distance between them. | Radius | Defines the radius of a selected arc or circle by constraining the radius. |
Internal anglr | Defines the internal angle between two selected lines. | Snell's law | Constrains two lines to obey a refraction law to simulate the light going through an interface |
Internal alignment | Aligns selected elements to selected shape (e.g. a line to become major axis of an ellipse) | Map sketch | Maps a sketch to the previously selected face of a solid |
Merge | Merge two or more sketches | Mirror | Mirrors selected elements of a sketch |
Part Design
The Part Design Workbench contains advanced tools to build solid parts. It also contains all the tools from the sketcher. Since it can only produce solid shapes (the rule number one of Part Design), it is the main workbench to use when designing pieces (parts) to be manufactured or 3D-printed, as you will always obtain a printable object.
Tool | Description | Tool | Description |
---|---|---|---|
Pad | Extrudes a solid object from a selected sketch | Creates a pocket from a selected sketch. The sketch must be mapped to an existing solid object's face | |
Revolution | Creates a solid by revolving a sketch around an axis | Groove | Creates a groove by revolving a sketch around an axis |
Fillet | Fillets (rounds) edges of an object | Chamfer | Chamfers edges of an object |
Draft | Applies angular draft to faces of an object | Mirrored | Mirrors features on a plane or face |
Linear pattern | Creates a linear pattern of features | Polar pattern | Creates a polar pattern of features |
Scaled | Scales features to a different size | Multitransform | Allows creating a pattern with any combination of the other transformations |
Shaft wizard | Generates a shaft from a table of values and allows to analyze forces and moments | Involute gear wizard | Allows you to create several types of gears |
Arch
The Arch Workbench contains tools to work with BIM projects (civil engineering and architecture). It also contains all the tools from the Draft workbench. The main use of the Arch Workbench is to create BIM objects or give BIM attributes to objects built with other workbenches, in order to export them to IFC.
Tool | Description | Tool | Description |
---|---|---|---|
Wall | Creates a wall from scratch or using a selected object as a base | Structure | Creates a structural element from scratch or using a selected object as a base |
Rebar | Creates a reinforcement bar in a selected structural element | Floor | Creates a floor including selected objects |
Building | Creates a building including selected objects | Site | Creates a site including selected objects |
Window | Creates a window using a selected object as a base | Section plane | Adds a section plane object to the document |
Axis | Adds an axes system to the document | Roof | Creates a sloped roof from a selected face |
Space | Creates a space object in the document | Stairs | Creates a stairs object in the document |
Panel | Creates a panel object from a selected 2D object | Frame | Creates a frame object from a selected layout |
Equipment | Creates an equipment or furniture object | Material | Attributes a material to selected objects |
Schedule | Creates different types of schedules | Cut plane | Cut an object according to a plan |
Add | Adds objects to a component | Remove | Subtracts or removes objects from a component |
Survey | Enters or leaves surveying mode |
Drawing
The Drawing Workbench handles the creation and manipulation of 2D drawing sheets, used for displaying views of your 3D work in 2D. These sheets can then be exported to 2D applications in SVG or DXF formats, to a PDF file or printed.
Tool | Description | Tool | Description |
---|---|---|---|
New sheet | Creates a new drawing sheet | View | Inserts a view of the selected object in the active drawing sheet |
Annotation | Adds an annotation to the current drawing sheet | Clip | Adds a clip group to the current drawing sheet |
Open browser | Opens a preview of the current sheet in the browser | Ortho views | Automatically creates orthographic views of an object on the current drawing sheet |
Symbol | Adds the contents of a SVG file as a symbol on the current drawing sheet | Draft view | Inserts a special Draft view of the selected object in the current drawing sheet |
Save | Saves the current sheet as a SVG file |
Other built-in workbenches
Although the above summarizes the most important tools of FreeCAD, many more workbenches are available, among them:
- The Mesh Workbench allows to work with polygon meshes. Although meshes are not the preferred type of geometry to work with in FreeCAD, because of their lack of precision and support for curves, meshes still have a lot of uses, and are fully supported in FreeCAD. The Mesh Workbench also offers a number of Part-to-Mesh and Mesh-to-Part tools.
- The Raytracing Workbench offers tools to interface with external renderers such as povray or luxrender. Right from inside FreeCAD, this workbench allows you to produce high-quality renderings from your models.
- The Spreadsheet Workbench permits the creation and manipulation of spreadsheet data, that can be extracted from FreeCAD models. Spreadsheet cells can also be referenced in many areas of FreeCAD, allowing to use them as master data structures.
- The FEM Workbench deals with Finite Elements Analysis, and permits the performing of pre- and post-processing FEM calculations and to display the results graphically.
External workbenches
A number of other very useful workbenches produced by FreeCAD community members also exist. Although they are not included in a standard FreeCAD installation,they are easy to install as plug-ins. They are all referenced in the FreeCAD-addons repository. Among the most developed are:
- The Drawing Dimensioning Workbench offers many new tools to work directly on Drawing Sheets and allow you to add dimensions, annotations and other technical symbols with great control over their aspect. The Drawing Dimensioning Workbench is no longer maintained.
- The Fasteners Workbench offers a wide range of ready-to-insert fasteners objects like screws, bolts, rods, washers and nuts. Many options and settings are available.
- The A2plus workbench offers a series of tools to mount and work with assemblies.
Weiterlesen