Macro CloneConvert: Difference between revisions
m (version title) |
No edit summary |
||
(29 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
<languages/> |
|||
<translate> |
<translate> |
||
<!--T:1--> |
<!--T:1--> |
||
{{Macro |
|||
{{Macro|Icon=Macro_CloneConvert |Name=Macro CloneConvert|Description=Creates a clone of the object and the converted in the chosen position and size (inch, mm, m, µm...).|Author=mario52|Version=0.9 (14/06/2016)}} |
|||
|Name=Macro CloneConvert |
|||
|Icon=Macro_CloneConvert.png |
|||
|Description={{ColoredText|#ff0000|#ffffff| Latest update: GUI modified for HiDPI support (QGridLayout). Runs ≥v0.18 (PySide2 Qt5)}}<br/><br/> |
|||
For previous versions see [https://gist.githubusercontent.com/mario52a/9f2f2f6144e1307a048f1840ef99300c/raw/0a141260ad8d5f67f0fc18b9b40ef37757c06c65/Macro_CloneConvert.FCMacro Macro_CloneConvert] and install manually.<br/><br/>Creates a Clone/Copy/Compound of the object(s) and then converted into a chosen position and size (''inch, mm, m, µm''...) or free. The base object is recognized in ''mm'' (FreeCAD base). |
|||
|Author=mario52 |
|||
|Version=0.15 |
|||
|Date=2020-06-06 |
|||
|FCVersion= ≥0.18 |
|||
|Download=[https://www.freecadweb.org/wiki/images/0/0a/Macro_CloneConvert.png ToolBar Icon] |
|||
}} |
|||
==Description== <!--T:2--> |
==Description== <!--T:2--> |
||
Creates a clone or copy of the object and |
Creates a clone or copy of the object and then converts it into a chosen position and size (''inch, mm, m, µm''...) or free. The base object is recognized in ''mm'' (FreeCAD base) |
||
</translate> |
|||
==Uses== <!--T:3--> |
|||
{{Codeextralink|https://gist.githubusercontent.com/mario52a/9f2f2f6144e1307a048f1840ef99300c/raw/39bc54e90b80053a5af76b0b17694cb53697aebd/Macro_CloneConvert.FCMacro}} |
|||
Run the macro, the XYZ settings, choose "Clone" or "Copy" a unit or one value of choice select your object, and click {{KEY|Ok}} button. |
|||
<translate> |
|||
<!--T: |
==Usage== <!--T:3--> |
||
# Run the macro |
|||
If no value is entered a copy or clone will be created without modification. If no object is selected the {{KEY|Ok}} button will be colored in red. |
|||
# Set the XYZ settings |
|||
# Choose "Clone" or "Copy" |
|||
# Choose a measurement unit |
|||
# Select your object |
|||
# Click {{KEY|Ok}} |
|||
<!--T: |
==Notes== <!--T:9--> |
||
* If no value is entered a copy or clone will be created without modification. |
|||
The value of the '''BoundingBox''', '''Volume''' and '''Surface''' is diplayed in the Report view, in the case of '''Copy''' multiple object, the display will show BoundingBox 0.0. |
|||
* If no object is selected the {{KEY|Ok}} button will be colored in red. |
|||
<!--T:10--> |
|||
The value of the '''BoundingBox''', '''Volume''' and '''Surface''' is displayed in the [[Report_view|Report view]], in the case of '''Copy''' multiple object, the display will show BoundingBox 0.0. |
|||
<!--T:4--> |
<!--T:4--> |
||
The base is the mm example with a '''1 mm''' |
The base is the mm example with a '''1 mm''' side of cube: |
||
<!--T:5--> |
<!--T:5--> |
||
Line 41: | Line 61: | ||
<!--T:6--> |
<!--T:6--> |
||
Predefined units are |
Predefined units are: |
||
km, hm, dam, m, dm, cm, '''mm''', µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique. |
km, hm, dam, m, dm, cm, '''mm''', µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique. |
||
<br /><br /> |
<br /><br /> |
||
<!--T:7--> |
<!--T:7--> |
||
[[File:Macro CloneConvert_01.png| |
[[File:Macro CloneConvert_01.png|350px|left|CloneConvert]] |
||
* '''Mode''' |
* '''Mode''' |
||
* '''Clone :''' |
* '''Clone :''' The object(s) clone are create |
||
* '''Copy :''' One copy of the objet(s) is create |
* '''Copy :''' One copy of the objet(s) is create |
||
* '''Comp :''' One compound of the objet(s) is create |
* '''Comp :''' One compound of the objet(s) is create |
||
* '''Increm. :''' incrementing the coordinates data to the original coordinates of the object (Placement, Rotation ...)<br />If this is not checked the Placement begin in coordinates 0,0,0 of FreeCAD<br />In case a compound Placement information is [0,0,0] the Placement begin in the position of object<br />If the real location is away from the base coordinates 0,0,0 use the {{KEY|ValueAt()}} button for the real Placement of the subObject selected Face, Wire, Line .... |
* '''Increm. :''' incrementing the coordinates data to the original coordinates of the object (Placement, Rotation ...)<br />If this is not checked the Placement begin in coordinates 0,0,0 of FreeCAD<br />In case a compound Placement information is [0,0,0] the Placement begin in the position of object<br />If the real location is away from the base coordinates 0,0,0 use the {{KEY|ValueAt()}} button for the real Placement of the subObject selected Face, Wire, Line .... |
||
* '''Unique :''' If this checkBox is checked and multiple object selected, the clone created is one unique object |
|||
<!--T:28--> |
<!--T:28--> |
||
Line 90: | Line 111: | ||
==Script== <!--T:8--> |
==Script== <!--T:8--> |
||
The |
The icon [[Image:Macro_CloneConvert.png]] |
||
<!--T:18--> |
<!--T:18--> |
||
Macro_CloneConvert.FCMacro |
'''Macro_CloneConvert.FCMacro''' |
||
</translate> |
|||
<syntaxhighlight> |
|||
# -*- coding: utf-8 -*- |
|||
<!--T:34--> |
|||
# CloneConvert.FCMacro |
|||
Download the macro to Gist [https://gist.github.com/mario52a/9f2f2f6144e1307a048f1840ef99300c Macro_CloneConvert.FCMacro] |
|||
# Cree un clone ou une copie de l'objet ou des objets selectionne(s) et le met e l'echelle de la grandeur choisie |
|||
# utilisation : lancer CloneConvert selectionnez un objet choisissez la grandeur et cliquez sur OK |
|||
# |
|||
# Creates a clone of one copy the selected object and updates the selected size range |
|||
# use: start CloneConvert select an object choose the size and click OK |
|||
# |
|||
==Revision== <!--T:19--> |
|||
#OS: Windows Vista #OS: Windows 8.1 |
|||
#Word size: 32-bit #Word size of OS: 64-bit |
|||
#Version: 0.14.3700 (Git) #Word size of FreeCAD: 32-bit |
|||
#Branch: releases/FreeCAD-0-14 #Version: 0.16.5231 (Git) |
|||
#Hash: 32f5aae0a64333ec8d5d160dbc46e690510c8fe1 #Build type: Release |
|||
#Python version: 2.6.2 #Branch: master |
|||
#Qt version: 4.5.2 #Hash: 945638c405766faca0e5f4c1611c00151c88a2ff |
|||
#Coin version: 3.1.0 #Python version: 2.7.8 |
|||
#SoQt version: 1.4.1 #Qt version: 4.8.6 |
|||
#OCC version: 6.5.1 #Coin version: 4.0.0a |
|||
# #OCC version: 6.8.0.oce-0.17 |
|||
# |
|||
<!--T:41--> |
|||
# ver 0.3 31/07/2014 PyQt4 + PySide |
|||
06/06/2020 ver 0.15 = icon |
|||
# ver 0.5 26/07/2015 correction rotation plusieurs objets Copy |
|||
# ver 0.6 26/01/2016 correction placement avec plusieurs objets Copy |
|||
# ver 0.7 30/01/2016 reecriture du code avec Placement et ajout Increment et de boutons |
|||
# ver 0.8 31/01/2016 clique 2 fois pour mettre les valeurs a zero (en cas de modifications reinitialisait ) |
|||
# ver 0.8 14/06/2016 ajout du bouton nombre de copies et optimisation des labels |
|||
<!--T:40--> |
|||
__title__ = "CloneConvert" |
|||
20/05/2020 ver 0.14 = grid layout PySide2 Qt5 |
|||
__author__ = "mario52" |
|||
__url__ = "http://www.freecadweb.org/index-fr.html" |
|||
__version__ = "00.09" |
|||
__date__ = "14/06/2016" |
|||
<!--T:39--> |
|||
__Comment__ = "This macro creates Clone or Copy or Compound of object(s)" |
|||
15/09/2019 ver 0.13 = replace the grec sign micro to "um", replace all "_translate("MainWindow", "mm", None)" to "mm" and comment line "text.encode('utf-8')" cause not work with FC 0.19 18.213 |
|||
__Web__ = "http://www.freecadweb.org/" |
|||
__Wiki__ = "http://www.freecadweb.org/wiki/index.php?title=Macro_CloneConvert" |
|||
__Icon__ = "/usr/lib/freecad/Mod/plugins/icons/Macro_CloneConvert.png" |
|||
__IconW__ = "C:/Users/User Name/AppData/Roaming/FreeCAD/Macro_CloneConvert.png" |
|||
__Help__ = "start the macro and follow the instructions" |
|||
__Status__ = "stable" |
|||
__Requires__ = "Alls Freecad" |
|||
__Communication__ = "http://www.freecadweb.org/wiki/index.php?title=User:Mario52" |
|||
<!--T:38--> |
|||
01/06/2019 ver 0.12 = adapted for 0.19 et correction "Copy:legacy=True" and ShapeColor ..... |
|||
<!--T:37--> |
|||
try: |
|||
30/03/2018 ver 0.11 = odd checkBox, if multi selection the clone are object unique or object separate |
|||
import PyQt4 # PyQt4 |
|||
from PyQt4 import QtCore, QtGui # PyQt4 |
|||
# print "PyQt4" |
|||
<!--T:35--> |
|||
except Exception: |
|||
07/06/2017 ver 0.10 = replace Draft...Copy to Part..Shape cause section Copy : not draw copy scaled of object but copy not scaled ?? |
|||
import PySide # PySide |
|||
from PySide import QtCore, QtGui # PySide |
|||
# print "PySide" |
|||
<!--T:36--> |
|||
import Draft, Part, FreeCAD, math, PartGui, FreeCADGui |
|||
from math import sqrt, pi, sin, cos, asin |
|||
from FreeCAD import Base |
|||
from decimal import * |
|||
from Draft import * |
|||
from FreeCAD import Vector, Rotation, Placement, Console |
|||
try: |
|||
_fromUtf8 = QtCore.QString.fromUtf8 |
|||
except AttributeError: |
|||
def _fromUtf8(s): |
|||
return s |
|||
try: |
|||
_encoding = QtGui.QApplication.UnicodeUTF8 |
|||
def _translate(context, text, disambig): |
|||
return QtGui.QApplication.translate(context, text, disambig, _encoding) |
|||
except AttributeError: |
|||
def _translate(context, text, disambig): |
|||
return QtGui.QApplication.translate(context, text, disambig) |
|||
global surface ; surface = 0.0 |
|||
global volume_ ; volume_ = 0.0 |
|||
global boundBox_ ; boundBox_ = 0.0 |
|||
global boundBoxLX ; boundBoxLX = 0.0 |
|||
global boundBoxLY ; boundBoxLY = 0.0 |
|||
global boundBoxLZ ; boundBoxLZ = 0.0 |
|||
global boundBox_S ; boundBox_S = "" |
|||
global uniteM_X ; uniteM_X = 1.0 |
|||
global uniteM_Y ; uniteM_Y = 1.0 |
|||
global uniteM_Z ; uniteM_Z = 1.0 |
|||
global uniteM ; uniteM = 1.0 |
|||
global uniteMs ; uniteMs = "mm" # default mm |
|||
global placement_X ; placement_X = 0.0 |
|||
global placement_Y ; placement_Y = 0.0 |
|||
global placement_Z ; placement_Z = 0.0 |
|||
global Yaw_Z ; Yaw_Z = 0.0 |
|||
global Pitch_Y ; Pitch_Y = 0.0 |
|||
global Roll_X ; Roll_X = 0.0 |
|||
global copyNumber ; copyNumber = 1 |
|||
global switchP ; switchP = 0 |
|||
global switchA ; switchA = 0 |
|||
global switchS ; switchS = 0 |
|||
global sel ; sel = "" |
|||
global cloneCopy ; cloneCopy = 1 |
|||
global a ; a = "" |
|||
class Ui_MainWindow(object): |
|||
def __init__(self, MainWindow): |
|||
# path = FreeCAD.ConfigGet("AppHomePath") |
|||
global uniteMs |
|||
self.window = MainWindow |
|||
MainWindow.setObjectName(_fromUtf8("MainWindow")) |
|||
MainWindow.resize(230, 549) |
|||
MainWindow.setMinimumSize(QtCore.QSize(230, 549)) |
|||
MainWindow.setMaximumSize(QtCore.QSize(230, 549)) |
|||
self.centralWidget = QtGui.QWidget(MainWindow) |
|||
self.centralWidget.setObjectName(_fromUtf8("centralWidget")) |
|||
self.label = QtGui.QLabel(self.centralWidget) |
|||
self.label.setGeometry(QtCore.QRect(10, 10, 191, 16)) |
|||
self.label.setAlignment(QtCore.Qt.AlignCenter) |
|||
self.label.setObjectName(_fromUtf8("label")) |
|||
self.groupBox = QtGui.QGroupBox(self.centralWidget) |
|||
self.groupBox.setGeometry(QtCore.QRect(10, 30, 211, 141)) |
|||
self.groupBox.setObjectName(_fromUtf8("groupBox")) |
|||
self.doubleSpinBox = QtGui.QDoubleSpinBox(self.groupBox) |
|||
self.doubleSpinBox.setGeometry(QtCore.QRect(100, 50, 101, 22)) |
|||
self.doubleSpinBox.setDecimals(7) |
|||
self.doubleSpinBox.setMinimum(-10000000.0) |
|||
self.doubleSpinBox.setMaximum(10000000.0) |
|||
self.doubleSpinBox.setSingleStep(1.0) |
|||
self.doubleSpinBox.setProperty("value", 0.0) |
|||
self.doubleSpinBox.setObjectName(_fromUtf8("doubleSpinBox")) |
|||
self.doubleSpinBox.valueChanged.connect(self.on_doubleSpinBox_valueChanged) #connection doubleSpinBox |
|||
self.label_2 = QtGui.QLabel(self.groupBox) |
|||
self.label_2.setGeometry(QtCore.QRect(10, 50, 91, 16)) |
|||
self.label_2.setObjectName(_fromUtf8("label_2")) |
|||
self.label_3 = QtGui.QLabel(self.groupBox) |
|||
self.label_3.setGeometry(QtCore.QRect(10, 80, 91, 16)) |
|||
self.label_3.setObjectName(_fromUtf8("label_3")) |
|||
self.label_4 = QtGui.QLabel(self.groupBox) |
|||
self.label_4.setGeometry(QtCore.QRect(10, 110, 91, 16)) |
|||
self.label_4.setObjectName(_fromUtf8("label_4")) |
|||
self.doubleSpinBox_2 = QtGui.QDoubleSpinBox(self.groupBox) |
|||
self.doubleSpinBox_2.setGeometry(QtCore.QRect(100, 80, 101, 22)) |
|||
self.doubleSpinBox_2.setDecimals(7) |
|||
self.doubleSpinBox_2.setMinimum(-10000000.0) |
|||
self.doubleSpinBox_2.setMaximum(10000000.0) |
|||
self.doubleSpinBox_2.setSingleStep(1.0) |
|||
self.doubleSpinBox_2.setProperty("value", 0.0) |
|||
self.doubleSpinBox_2.setObjectName(_fromUtf8("doubleSpinBox_2")) |
|||
self.doubleSpinBox_2.valueChanged.connect(self.on_doubleSpinBox_2_valueChanged) #connection doubleSpinBox_2 |
|||
self.doubleSpinBox_3 = QtGui.QDoubleSpinBox(self.groupBox) |
|||
self.doubleSpinBox_3.setGeometry(QtCore.QRect(100, 110, 101, 22)) |
|||
self.doubleSpinBox_3.setDecimals(7) |
|||
self.doubleSpinBox_3.setMinimum(-10000000.0) |
|||
self.doubleSpinBox_3.setMaximum(10000000.0) |
|||
self.doubleSpinBox_3.setSingleStep(1.0) |
|||
self.doubleSpinBox_3.setProperty("value", 0.0) |
|||
self.doubleSpinBox_3.setObjectName(_fromUtf8("doubleSpinBox_3")) |
|||
self.doubleSpinBox_3.valueChanged.connect(self.on_doubleSpinBox_3_valueChanged) #connection doubleSpinBox_3 |
|||
self.radioButton = QtGui.QRadioButton(self.groupBox) |
|||
self.radioButton.setGeometry(QtCore.QRect(10, 20, 51, 20)) |
|||
self.radioButton.setChecked(True) |
|||
self.radioButton.setObjectName(_fromUtf8("radioButton")) |
|||
self.radioButton.setToolTip(_translate("MainWindow", "Create a clone of the object(s)", None)) |
|||
self.radioButton.clicked.connect(self.on_radioButton_clicked) #connection radioButton mode clone |
|||
self.radioButton_2 = QtGui.QRadioButton(self.groupBox) |
|||
self.radioButton_2.setGeometry(QtCore.QRect(58, 20, 51, 20)) |
|||
self.radioButton_2.setObjectName(_fromUtf8("radioButton_2")) |
|||
self.radioButton_2.setToolTip(_translate("MainWindow", "Create a copy of the object(s)", None)) |
|||
self.radioButton_2.clicked.connect(self.on_radioButton_2_clicked) #connection radioButton_2 mode copy |
|||
self.radioButton_3 = QtGui.QRadioButton(self.groupBox) |
|||
self.radioButton_3.setGeometry(QtCore.QRect(105, 20, 51, 20)) |
|||
self.radioButton_3.setObjectName(_fromUtf8("radioButton_3")) |
|||
self.radioButton_3.setToolTip(_translate("MainWindow", "Create a compount of the object(s)", None)) |
|||
self.radioButton_3.clicked.connect(self.on_radioButton_3_clicked) #connection radioButton_3 mode compount |
|||
self.checkBox = QtGui.QCheckBox(self.groupBox) |
|||
self.checkBox.setGeometry(QtCore.QRect(155, 20, 61, 20)) |
|||
self.checkBox.setChecked(True) |
|||
self.checkBox.setToolTip(_translate("MainWindow", "Apply incremental changes to object Placement (Defaut)\n"+ |
|||
"If this is not checked the Placement begin in coordinates 0,0,0 of FreeCAD\n"+ |
|||
"In case a compound Placement information is [0,0,0] the Placement begin in the position of object\n"+ |
|||
"If the real location is away from the base coordinates 0,0,0 use the ValueAt() button\n" |
|||
"for the real Placement of the subObject selected Face, Wire, Line ....", None)) |
|||
self.checkBox.setObjectName(_fromUtf8("checkBox")) |
|||
self.pushButton_5 = QtGui.QPushButton(self.groupBox) |
|||
self.pushButton_5.setGeometry(QtCore.QRect(75, 50, 21, 22)) |
|||
self.pushButton_5.setObjectName(_fromUtf8("pushButton_5")) |
|||
self.pushButton_5.clicked.connect(self.on_pushButton_5_clicked) # connect on def "on_pushButton_5_clicked" |
|||
self.groupBox_2 = QtGui.QGroupBox(self.centralWidget) |
|||
self.groupBox_2.setGeometry(QtCore.QRect(10,300,101,51)) |
|||
self.groupBox_2.setObjectName(_fromUtf8("groupBox_2")) |
|||
self.comboBox = QtGui.QComboBox(self.groupBox_2) |
|||
self.comboBox.setGeometry(QtCore.QRect(10, 20, 81, 22)) |
|||
self.comboBox.setMinimumContentsLength(0) |
|||
self.comboBox.setObjectName(_fromUtf8("comboBox")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.addItem(_fromUtf8("")) |
|||
self.comboBox.setToolTip(_translate("MainWindow",u"Select unit. . .", None)) |
|||
QtCore.QObject.connect(self.comboBox, QtCore.SIGNAL("currentIndexChanged(QString)"), self.SIGNAL_comboBox_Changed) |
|||
self.groupBox_3 = QtGui.QGroupBox(self.centralWidget) |
|||
self.groupBox_3.setGeometry(QtCore.QRect(10, 360, 211, 111)) |
|||
self.groupBox_3.setObjectName(_fromUtf8("groupBox_3")) |
|||
self.doubleSpinBox_4 = QtGui.QDoubleSpinBox(self.groupBox_3) |
|||
self.doubleSpinBox_4.setGeometry(QtCore.QRect(100, 20, 101, 22)) |
|||
self.doubleSpinBox_4.setDecimals(7) |
|||
self.doubleSpinBox_4.setMinimum(-1000000) |
|||
self.doubleSpinBox_4.setMaximum(1000000.0) |
|||
self.doubleSpinBox_4.setSingleStep(1.0) |
|||
self.doubleSpinBox_4.setProperty("value", 1.0) |
|||
self.doubleSpinBox_4.setObjectName(_fromUtf8("doubleSpinBox_4")) |
|||
self.doubleSpinBox_4.setToolTip(_translate("MainWindow", "Scale free X multiplied by ...\nIf the value is negative the object result is reverted in X axis", None)) |
|||
self.doubleSpinBox_4.valueChanged.connect(self.on_doubleSpinBox_4_valueChanged) #connection doubleSpinBox_4 |
|||
self.doubleSpinBox_5 = QtGui.QDoubleSpinBox(self.groupBox_3) |
|||
self.doubleSpinBox_5.setGeometry(QtCore.QRect(100, 50, 101, 22)) |
|||
self.doubleSpinBox_5.setDecimals(7) |
|||
self.doubleSpinBox_5.setMinimum(-1000000) |
|||
self.doubleSpinBox_5.setMaximum(1000000.0) |
|||
self.doubleSpinBox_5.setSingleStep(1.0) |
|||
self.doubleSpinBox_5.setProperty("value", 1.0) |
|||
self.doubleSpinBox_5.setObjectName(_fromUtf8("doubleSpinBox_5")) |
|||
self.doubleSpinBox_5.setToolTip(_translate("MainWindow", "Scale free Y multiplied by ...\n"+ |
|||
"If the value is negative the object result is reverted in Y axis", None)) |
|||
self.doubleSpinBox_5.valueChanged.connect(self.on_doubleSpinBox_5_valueChanged) #connection doubleSpinBox_5 |
|||
self.doubleSpinBox_6 = QtGui.QDoubleSpinBox(self.groupBox_3) |
|||
self.doubleSpinBox_6.setGeometry(QtCore.QRect(100, 80, 101, 22)) |
|||
self.doubleSpinBox_6.setDecimals(7) |
|||
self.doubleSpinBox_6.setMinimum(-1000000) |
|||
self.doubleSpinBox_6.setMaximum(1000000.0) |
|||
self.doubleSpinBox_6.setSingleStep(1.0) |
|||
self.doubleSpinBox_6.setProperty("value", 1.0) |
|||
self.doubleSpinBox_6.setObjectName(_fromUtf8("doubleSpinBox_6")) |
|||
self.doubleSpinBox_6.setToolTip(_translate("MainWindow", "Scale free Z multiplied by ...\n"+ |
|||
"If the value is negative the object result is reverted in Z axis", None)) |
|||
self.doubleSpinBox_6.valueChanged.connect(self.on_doubleSpinBox_6_valueChanged) #connection doubleSpinBox_6 |
|||
self.label_5 = QtGui.QLabel(self.groupBox_3) |
|||
self.label_5.setGeometry(QtCore.QRect(10, 20, 53, 16)) |
|||
self.label_5.setObjectName(_fromUtf8("label_5")) |
|||
self.label_6 = QtGui.QLabel(self.groupBox_3) |
|||
self.label_6.setGeometry(QtCore.QRect(10, 50, 53, 16)) |
|||
self.label_6.setObjectName(_fromUtf8("label_6")) |
|||
self.label_7 = QtGui.QLabel(self.groupBox_3) |
|||
self.label_7.setGeometry(QtCore.QRect(10, 80, 53, 16)) |
|||
self.label_7.setObjectName(_fromUtf8("label_7")) |
|||
self.pushButton_6 = QtGui.QPushButton(self.centralWidget) |
|||
self.pushButton_6.setGeometry(QtCore.QRect(10, 479, 65, 25)) |
|||
self.pushButton_6.setObjectName(_fromUtf8("pushButton_6")) |
|||
self.pushButton_6.clicked.connect(self.on_pushButton_6_clicked) # connect on def "on_pushButton_6_clicked" |
|||
self.pushButton = QtGui.QPushButton(self.centralWidget) |
|||
self.pushButton.setGeometry(QtCore.QRect(82, 510, 65, 28)) |
|||
self.pushButton.setObjectName(_fromUtf8("pushButton")) |
|||
self.pushButton_1 = QtGui.QPushButton(self.centralWidget) |
|||
self.pushButton_1.setGeometry(QtCore.QRect(10, 510, 65, 28)) |
|||
self.pushButton_1.setObjectName(_fromUtf8("pushButton_1")) |
|||
self.pushButton_1.setStyleSheet("background-color: Base") |
|||
self.pushButton_1.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01 "OK" |
|||
self.pushButton_2 = QtGui.QPushButton(self.centralWidget) |
|||
self.pushButton_2.setGeometry(QtCore.QRect(155, 510, 65, 28)) |
|||
self.pushButton_2.setObjectName(_fromUtf8("pushButton_2")) |
|||
self.pushButton_2.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02 "Quitter" |
|||
self.pushButton_3 = QtGui.QPushButton(self.groupBox_3) |
|||
self.pushButton_3.setGeometry(QtCore.QRect(75, 20, 21, 21)) |
|||
self.pushButton_3.setToolTip(_fromUtf8("Align the Scale YZ to X")) |
|||
self.pushButton_3.setObjectName(_fromUtf8("pushButton_3")) |
|||
self.pushButton_3.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03 "..." align YZ to X |
|||
self.groupBox_4 = QtGui.QGroupBox(self.centralWidget) |
|||
self.groupBox_4.setGeometry(QtCore.QRect(10, 180, 211, 111)) |
|||
self.groupBox_4.setObjectName(_fromUtf8("groupBox_4")) |
|||
self.doubleSpinBox_7 = QtGui.QDoubleSpinBox(self.groupBox_4) |
|||
self.doubleSpinBox_7.setGeometry(QtCore.QRect(100, 20, 101, 22)) |
|||
self.doubleSpinBox_7.setDecimals(7) |
|||
self.doubleSpinBox_7.setMinimum(-360.0) |
|||
self.doubleSpinBox_7.setMaximum(360.0) |
|||
self.doubleSpinBox_7.setObjectName(_fromUtf8("doubleSpinBox_7")) |
|||
self.doubleSpinBox_7.setToolTip(_translate("MainWindow", "Rotation of Yaw ( Axis Z )", None)) |
|||
self.doubleSpinBox_7.valueChanged.connect(self.on_doubleSpinBox_7_valueChanged) #connection doubleSpinBox_7 |
|||
self.doubleSpinBox_8 = QtGui.QDoubleSpinBox(self.groupBox_4) |
|||
self.doubleSpinBox_8.setGeometry(QtCore.QRect(100, 50, 101, 22)) |
|||
self.doubleSpinBox_8.setDecimals(7) |
|||
self.doubleSpinBox_8.setMinimum(-360.0) |
|||
self.doubleSpinBox_8.setMaximum(360.0) |
|||
self.doubleSpinBox_8.setObjectName(_fromUtf8("doubleSpinBox_8")) |
|||
self.doubleSpinBox_8.setToolTip(_translate("MainWindow", "Rotation of Pitch ( Axis Y )", None)) |
|||
self.doubleSpinBox_8.valueChanged.connect(self.on_doubleSpinBox_8_valueChanged) #connection doubleSpinBox_8 |
|||
self.doubleSpinBox_9 = QtGui.QDoubleSpinBox(self.groupBox_4) |
|||
self.doubleSpinBox_9.setGeometry(QtCore.QRect(100, 80, 101, 22)) |
|||
self.doubleSpinBox_9.setDecimals(7) |
|||
self.doubleSpinBox_9.setMinimum(-360.0) |
|||
self.doubleSpinBox_9.setMaximum(360.0) |
|||
self.doubleSpinBox_9.setObjectName(_fromUtf8("doubleSpinBox_9")) |
|||
self.doubleSpinBox_9.setToolTip(_translate("MainWindow", "Rotation of Roll ( Axis X )", None)) |
|||
self.doubleSpinBox_9.valueChanged.connect(self.on_doubleSpinBox_9_valueChanged) #connection doubleSpinBox_9 |
|||
self.groupBox_5 = QtGui.QGroupBox(self.centralWidget) |
|||
self.groupBox_5.setGeometry(QtCore.QRect(120,300,101,51)) |
|||
self.groupBox_5.setObjectName(_fromUtf8("groupBox_5")) |
|||
self.SpinBox = QtGui.QSpinBox(self.groupBox_5) |
|||
self.SpinBox.setGeometry(QtCore.QRect(10, 20, 81, 22)) |
|||
self.SpinBox.setMaximum(1000000) |
|||
self.SpinBox.setProperty("value", 1) |
|||
self.SpinBox.setObjectName(_fromUtf8("SpinBox")) |
|||
self.SpinBox.setToolTip(_translate("MainWindow", "Number copy of original", None)) |
|||
self.SpinBox.valueChanged.connect(self.on_SpinBox_valueChanged) #connection SpinBox |
|||
self.label_8 = QtGui.QLabel(self.groupBox_4) |
|||
self.label_8.setGeometry(QtCore.QRect(10, 20, 81, 16)) |
|||
self.label_8.setObjectName(_fromUtf8("label_8")) |
|||
self.label_9 = QtGui.QLabel(self.groupBox_4) |
|||
self.label_9.setGeometry(QtCore.QRect(10, 50, 81, 16)) |
|||
self.label_9.setObjectName(_fromUtf8("label_9")) |
|||
self.label_10 = QtGui.QLabel(self.groupBox_4) |
|||
self.label_10.setGeometry(QtCore.QRect(10, 80, 81, 16)) |
|||
self.label_10.setObjectName(_fromUtf8("label_10")) |
|||
self.pushButton_4 = QtGui.QPushButton(self.groupBox_4) |
|||
self.pushButton_4.setGeometry(QtCore.QRect(75, 20, 21, 22)) |
|||
self.pushButton_4.setObjectName(_fromUtf8("pushButton_4")) |
|||
self.pushButton_4.clicked.connect(self.on_pushButton_4_clicked) # connect on def "on_pushButton_4_clicked" |
|||
self.pushButton.clicked.connect(self.on_pushButton00_clicked) #connection pushButton00 "Reset" |
|||
self.lineEdit = QtGui.QLineEdit(self.centralWidget) |
|||
self.lineEdit.setGeometry(QtCore.QRect(83, 481, 136, 20)) |
|||
self.lineEdit.setObjectName(_fromUtf8("lineEdit")) |
|||
self.lineEdit.setText(QtGui.QApplication.translate("Form", " ", None, QtGui.QApplication.UnicodeUTF8)) |
|||
MainWindow.setCentralWidget(self.centralWidget) |
|||
self.retranslateUi(MainWindow) |
|||
QtCore.QMetaObject.connectSlotsByName(MainWindow) |
|||
def retranslateUi(self, MainWindow): |
|||
MainWindow.setWindowTitle(_translate("MainWindow", "CloneConvert", None)) |
|||
try: |
|||
MainWindow.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenetre en avant |
|||
except Exception: |
|||
MainWindow.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenetre en avant |
|||
self.label.setText(_translate("MainWindow", "Object converter", None)) |
|||
self.groupBox.setTitle(_translate("MainWindow", "Mode", None)) |
|||
self.radioButton.setText(_translate("MainWindow", "Clone", None)) |
|||
self.radioButton_2.setText(_translate("MainWindow", "Copy", None)) |
|||
self.radioButton_3.setText(_translate("MainWindow", "Comp.", None)) |
|||
self.checkBox.setText(_translate("MainWindow", "Increm.", None)) |
|||
self.pushButton_4.setToolTip(_translate("MainWindow", "Align the YX degrees values to Z value \n Two click reset the rotations values to 0.0", None)) |
|||
self.pushButton_4.setText(_translate("MainWindow", "...", None)) |
|||
self.pushButton_5.setToolTip(_translate("MainWindow", "Align the YZ coordinates values to X value \n Two click reset the coordinates values to 0.0", None)) |
|||
self.pushButton_5.setText(_translate("MainWindow", "...", None)) |
|||
self.pushButton_3.setToolTip(_translate("MainWindow", "Align the YZ scale values to X scale value \n Two click reset the scales values to 1.0", None)) |
|||
self.pushButton_3.setText(_translate("MainWindow", "...", None)) |
|||
self.doubleSpinBox.setToolTip(_translate("MainWindow", "Place the new object to the X coordinate ", None)) |
|||
self.doubleSpinBox.setSuffix(_translate("MainWindow", " mm", None)) |
|||
self.doubleSpinBox_2.setToolTip(_translate("MainWindow", "Place the new object to the Y coordinate", None)) |
|||
self.doubleSpinBox_2.setSuffix(_translate("MainWindow", " mm", None)) |
|||
self.doubleSpinBox_3.setToolTip(_translate("MainWindow", "Place the new object to the Z coordinate", None)) |
|||
self.doubleSpinBox_3.setSuffix(_translate("MainWindow", " mm", None)) |
|||
self.label_2.setText(_translate("MainWindow", "Coordinate X", None)) |
|||
self.label_3.setText(_translate("MainWindow", "Coordinate Y", None)) |
|||
self.label_4.setText(_translate("MainWindow", "Coordinate Z", None)) |
|||
self.groupBox_2.setTitle(_translate("MainWindow", "Scale predefined", None)) |
|||
self.comboBox.setToolTip(_translate("MainWindow", "Convert your object to . . .", None)) |
|||
self.comboBox.setCurrentIndex(6) |
|||
self.comboBox.setItemText(0, _translate("MainWindow", "km", None)) #km # = 1000000 |
|||
self.comboBox.setItemText(1, _translate("MainWindow", "hm", None)) #hm # = 100000 |
|||
self.comboBox.setItemText(2, _translate("MainWindow", "dam", None)) #dam# = 10000 |
|||
self.comboBox.setItemText(3, _translate("MainWindow", "m", None)) #m # = 1000 |
|||
self.comboBox.setItemText(4, _translate("MainWindow", "dm", None)) #dm # = 100 |
|||
self.comboBox.setItemText(5, _translate("MainWindow", "cm", None)) #cm # = 10 |
|||
self.comboBox.setItemText(6, _translate("MainWindow", "mm", None)) #mm # = 1 ##### |
|||
self.comboBox.setItemText(7, _translate("MainWindow", "µm", None)) #µm # micro = 0.001 |
|||
self.comboBox.setItemText(8, _translate("MainWindow", "nm", None)) #nm # nano = 0.000001 |
|||
self.comboBox.setItemText(9, _translate("MainWindow", "inch", None)) #in # inch pouce = 25.400 |
|||
self.comboBox.setItemText(10, _translate("MainWindow", "link", None)) #lk # link chainon = 201.168 |
|||
self.comboBox.setItemText(11, _translate("MainWindow", "foot", None)) #ft # foot pied = 304.800 |
|||
self.comboBox.setItemText(12, _translate("MainWindow", "yard", None)) #yd # yard verge = 914.400 |
|||
self.comboBox.setItemText(13, _translate("MainWindow", "perch", None)) #rd # rod ou perch perche = 5029.200 |
|||
self.comboBox.setItemText(14, _translate("MainWindow", "chain", None)) #ch # chain chaine = 20116.800 |
|||
self.comboBox.setItemText(15, _translate("MainWindow", "furlong", None)) #fur# furlong = 201168 |
|||
self.comboBox.setItemText(16, _translate("MainWindow", "mile", None)) #mi # mile = 1609344 |
|||
self.comboBox.setItemText(17, _translate("MainWindow", "league", None)) #lea# league lieue = 4828032 |
|||
self.comboBox.setItemText(18, _translate("MainWindow", "nautique", None)) #nmi# mile nautique = 1852000 |
|||
self.groupBox_3.setTitle(_translate("MainWindow", "Scale free", None)) |
|||
self.label_5.setText(_translate("MainWindow", "Scale X", None)) |
|||
self.label_6.setText(_translate("MainWindow", "Scale Y", None)) |
|||
self.label_7.setText(_translate("MainWindow", "Scale Z", None)) |
|||
self.pushButton.setToolTip(_translate("MainWindow", "Reset the values", None)) |
|||
self.pushButton.setText(_translate("MainWindow", "Reset", None)) |
|||
self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert Copy or Compount", None)) |
|||
self.pushButton_1.setText(_translate("MainWindow", "Ok", None)) |
|||
self.pushButton_2.setToolTip(_translate("MainWindow", "Quit the macro", None)) |
|||
self.pushButton_2.setText(_translate("MainWindow", "Quit", None)) |
|||
self.pushButton_6.setToolTip(_translate("MainWindow", "Give the valueAt() the subObject selected Face, Wire, Line ...\n"+ |
|||
"This option is useful in case a compound Placement information [0,0,0]\n"+ |
|||
"and its real location is away from the base coordinates 0,0,0\n"+ |
|||
"(gives no provide information about the tilt of the object)", None)) |
|||
self.pushButton_6.setText(_translate("MainWindow", "ValueAt()", None)) |
|||
self.groupBox_4.setTitle(_translate("MainWindow", "Rotation", None)) |
|||
self.groupBox_5.setTitle(_translate("MainWindow", "Number copy", None)) |
|||
self.label_8.setText(_translate("MainWindow", "Yaw ( Z )", None)) |
|||
self.label_9.setText(_translate("MainWindow", "Pitch ( Y )", None)) |
|||
self.label_10.setText(_translate("MainWindow", "Roll ( X )", None)) |
|||
self.doubleSpinBox_7.setSuffix(_translate("MainWindow", " Deg", None)) |
|||
self.doubleSpinBox_8.setSuffix(_translate("MainWindow", " Deg", None)) |
|||
self.doubleSpinBox_9.setSuffix(_translate("MainWindow", " Deg", None)) |
|||
def SIGNAL_comboBox_Changed(self,text): |
|||
global uniteM_X |
|||
global uniteM_Y |
|||
global uniteM_Z |
|||
global uniteM |
|||
global uniteMs |
|||
try: |
|||
text = unicode(text, 'ISO-8859-1').encode('UTF-8') # PyQt4 |
|||
except Exception: |
|||
text = text.encode('utf-8') # PySide |
|||
if text == "km": # = 1000000 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000000.0 |
|||
uniteMs= "km" |
|||
elif text == "hm": # = 100000 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100000.0 |
|||
uniteMs= "hm" |
|||
elif text == "dam": # = 10000 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10000.0 |
|||
uniteMs= "dam" |
|||
elif text == "m": # = 1000 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1000.0 |
|||
uniteMs= "m" |
|||
elif text == "dm": # = 100 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 100.0 |
|||
uniteMs= "dm" |
|||
elif text == "cm": # = 10 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 10.0 |
|||
uniteMs= "cm" |
|||
elif text == "mm": # = 1 ############################### |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0 |
|||
uniteMs= "mm" |
|||
elif text == "µm": # = 1000 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000.0 |
|||
uniteMs= u"µm" |
|||
elif text == "nm": # = 1000000 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0/1000000.0 |
|||
uniteMs= u"nm" |
|||
elif text == "inch": # inch = 25.400 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 25.400 |
|||
uniteMs= "in" |
|||
elif text == "link": # link = 201.168 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201.168 |
|||
uniteMs= "lk" |
|||
elif text == "foot": # foot = 304.800 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 304.800 |
|||
uniteMs= "ft" |
|||
elif text == "yard": # yard = 914.400 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 914.400 |
|||
uniteMs= "yd" |
|||
elif text == "perch": #rd # rod perche = 5029.200 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 5029.200 |
|||
uniteMs= "rd" |
|||
elif text == "chain": # chain = 20116.800 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 20116.800 |
|||
uniteMs= "ch" |
|||
elif text == "furlong": # furlong= 201168 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 201168 |
|||
uniteMs= "fur" |
|||
elif text == "mile": # mile = 1609344 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1609344 |
|||
uniteMs= "mi" |
|||
elif text == "league": # league = 4828032 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 4828032 |
|||
uniteMs= "lea" |
|||
elif text == "nautique": # nautique = 1852000 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1852000 |
|||
uniteMs= "nmi" |
|||
else: # mm = 1 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0 |
|||
uniteMs= "mm" |
|||
self.doubleSpinBox_4.setProperty("value", uniteM_X) |
|||
self.doubleSpinBox_5.setProperty("value", uniteM_Y) |
|||
self.doubleSpinBox_6.setProperty("value", uniteM_Z) |
|||
def on_radioButton_clicked(self): # if checked then mode clone |
|||
global cloneCopy |
|||
cloneCopy = 1 |
|||
def on_radioButton_2_clicked(self): # if checked then mode copy |
|||
global cloneCopy |
|||
cloneCopy = 0 |
|||
def on_radioButton_3_clicked(self): # if checked then mode compount |
|||
global cloneCopy |
|||
cloneCopy = 2 |
|||
def on_doubleSpinBox_valueChanged(self,value): # doubleSpinbox X |
|||
global placement_X |
|||
global switchP |
|||
switchP = 0 |
|||
placement_X = value |
|||
def on_doubleSpinBox_2_valueChanged(self,value): # doubleSpinbox Y |
|||
global placement_Y |
|||
global switchP |
|||
switchP = 0 |
|||
placement_Y = value |
|||
def on_doubleSpinBox_3_valueChanged(self,value): # doubleSpinbox Z |
|||
global placement_Z |
|||
global switchP |
|||
switchP = 0 |
|||
placement_Z = value |
|||
def on_doubleSpinBox_4_valueChanged(self,value): # doubleSpinbox free X |
|||
global uniteM_X |
|||
global switchS |
|||
switchS = 0 |
|||
uniteM_X = value |
|||
if uniteM_X == 0: |
|||
uniteM_X = 1 |
|||
def on_doubleSpinBox_5_valueChanged(self,value): # doubleSpinbox free Y |
|||
global uniteM_Y |
|||
global switchS |
|||
switchS = 0 |
|||
uniteM_Y = value |
|||
if uniteM_Y == 0: |
|||
uniteM_Y = 1 |
|||
def on_doubleSpinBox_6_valueChanged(self,value): # doubleSpinbox free Z |
|||
global uniteM_Z |
|||
global switchS |
|||
switchS = 0 |
|||
uniteM_Z = value |
|||
if uniteM_Z == 0: |
|||
uniteM_Z = 1 |
|||
def on_doubleSpinBox_7_valueChanged(self,value): # doubleSpinBox_7 Yaw ( Z ) |
|||
global Yaw_Z |
|||
global switchA |
|||
switchA = 0 |
|||
Yaw_Z = value |
|||
def on_doubleSpinBox_8_valueChanged(self,value): # doubleSpinBox_8 Pitch ( Y ) |
|||
global Pitch_Y |
|||
global switchA |
|||
switchA = 0 |
|||
Pitch_Y = value |
|||
def on_doubleSpinBox_9_valueChanged(self,value): # doubleSpinBox_9 Roll ( X ) |
|||
global Roll_X |
|||
global switchA |
|||
switchA = 0 |
|||
Roll_X = value |
|||
def on_SpinBox_valueChanged(self,value): # SpinBox Number copy |
|||
global copyNumber |
|||
copyNumber = value |
|||
def on_pushButton_5_clicked(self): # Bouton ... (align) placement |
|||
global placement_X |
|||
global placement_Y |
|||
global placement_Z |
|||
global switchP |
|||
if switchP == 0: |
|||
placement_Y = placement_Z = placement_X |
|||
switchP = 1 |
|||
else: |
|||
placement_Y = placement_Z = placement_X = 0.0 |
|||
switchP = 0 |
|||
self.doubleSpinBox.setProperty("value", placement_X) |
|||
self.doubleSpinBox_2.setProperty("value", placement_Y) |
|||
self.doubleSpinBox_3.setProperty("value", placement_Z) |
|||
def on_pushButton_6_clicked(self): # valueAt() placement detected |
|||
try: |
|||
sel = FreeCADGui.Selection.getSelection() |
|||
App.Console.PrintMessage(str(sel[0].Placement) +"\r\n") |
|||
selectionObjects = FreeCADGui.Selection.getSelectionEx() # Select an object or sub object getSelectionEx |
|||
edge = selectionObjects[0].SubObjects[0] |
|||
try: |
|||
self.lineEdit.setText(str(edge.valueAt(0,0))) # face |
|||
self.pushButton_6.setText(_translate("MainWindow", "ValueAt(0,0)", None)) |
|||
App.Console.PrintMessage(str(edge.valueAt(0,0)) +"\r\n") |
|||
except Exception: |
|||
self.lineEdit.setText(str(edge.valueAt(0))) # fil |
|||
self.pushButton_6.setText(_translate("MainWindow", "ValueAt(0)", None)) |
|||
App.Console.PrintMessage(str(edge.valueAt(0)) +"\r\n") |
|||
except Exception: |
|||
self.pushButton_6.setText(_translate("MainWindow", "ValueAt()", None)) |
|||
App.Console.PrintError("Select one subObject, Face, Wire, Line ..."+"\r\n") |
|||
App.Console.PrintMessage("____________________________________"+"\r\n") |
|||
def on_pushButton_4_clicked(self): # Bouton ... (align) rotation |
|||
global Yaw_Z |
|||
global Pitch_Y |
|||
global Roll_X |
|||
global switchA |
|||
if switchA == 0: |
|||
Pitch_Y = Roll_X = Yaw_Z |
|||
switchA = 1 |
|||
else: |
|||
Pitch_Y = Roll_X = Yaw_Z = 0.0 |
|||
switchA = 0 |
|||
self.doubleSpinBox_7.setProperty("value", Yaw_Z) |
|||
self.doubleSpinBox_8.setProperty("value", Pitch_Y) |
|||
self.doubleSpinBox_9.setProperty("value", Roll_X) |
|||
def on_pushButton03_clicked(self): # Bouton ... (align) uniteM |
|||
global uniteM_X |
|||
global uniteM_Y |
|||
global uniteM_Z |
|||
global switchS |
|||
global uniteM |
|||
global uniteMs |
|||
if switchS == 0: |
|||
uniteM_Y = uniteM_Z = uniteM_X |
|||
switchS = 1 |
|||
else: |
|||
uniteM_Y = uniteM_Z = uniteM_X = 1.0 |
|||
switchS = 0 |
|||
self.doubleSpinBox_4.setProperty("value", uniteM_X) |
|||
self.doubleSpinBox_5.setProperty("value", uniteM_Y) |
|||
self.doubleSpinBox_6.setProperty("value", uniteM_Z) |
|||
def on_pushButton00_clicked(self): # Bouton Reset |
|||
global sel |
|||
global uniteM_X |
|||
global uniteM_Y |
|||
global uniteM_Z |
|||
global uniteM |
|||
global uniteMs |
|||
global placement_X |
|||
global placement_Y |
|||
global placement_Z |
|||
global cloneCopy |
|||
global Yaw_Z |
|||
global Pitch_Y |
|||
global Roll_X |
|||
global copyNumber |
|||
sel = "" |
|||
self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None)) |
|||
self.pushButton_1.setStyleSheet("background-color: Base") |
|||
self.radioButton.setChecked(True) |
|||
cloneCopy = 1 |
|||
self.comboBox.setCurrentIndex(6) |
|||
self.doubleSpinBox.setProperty("value", 0.0) # coordinates |
|||
self.doubleSpinBox_2.setProperty("value", 0.0) |
|||
self.doubleSpinBox_3.setProperty("value", 0.0) |
|||
self.checkBox.setChecked(True) |
|||
placement_X = placement_Y = placement_Z = 0.0 |
|||
self.doubleSpinBox_4.setProperty("value", 1.0) # scale |
|||
self.doubleSpinBox_5.setProperty("value", 1.0) |
|||
self.doubleSpinBox_6.setProperty("value", 1.0) |
|||
self.doubleSpinBox_7.setProperty("value", 0.0) # angles |
|||
self.doubleSpinBox_8.setProperty("value", 0.0) |
|||
self.doubleSpinBox_9.setProperty("value", 0.0) |
|||
self.SpinBox.setProperty("value", 1) # number copy |
|||
copyNumber = 1 |
|||
uniteM = uniteM_X = uniteM_Y = uniteM_Z = 1.0 |
|||
uniteMs= "mm" |
|||
uniteM = 1 |
|||
self.lineEdit.setText("") |
|||
def on_pushButton01_clicked(self): # Bouton OK |
|||
global sel |
|||
global surface |
|||
global volume_ |
|||
global boundBox |
|||
global boundBoxLX |
|||
global boundBoxLY |
|||
global boundBoxLZ |
|||
global boundBox_S |
|||
global uniteM_X |
|||
global uniteM_Y |
|||
global uniteM_Z |
|||
global uniteM |
|||
global uniteMs |
|||
global placement_X |
|||
global placement_Y |
|||
global placement_Z |
|||
global sel |
|||
global Yaw_Z |
|||
global Pitch_Y |
|||
global Roll_X |
|||
global copyNumber |
|||
#### Chrono begin ######################################################################### chrono begin |
|||
import time #### chrono begin |
|||
depart = time.clock() #### chrono begin |
|||
#### Chrono begin ######################################################################### chrono begin |
|||
sel = FreeCADGui.Selection.getSelection() |
|||
if len(sel) != 0: |
|||
self.pushButton_1.setToolTip(_translate("MainWindow", "Ok for Convert or copy", None)) |
|||
self.pushButton_1.setStyleSheet("background-color: Base") |
|||
# boundinbox (dimensions hors tout) |
|||
try: |
|||
boundBox_ = sel[0].Shape.BoundBox # pour 1 seul objet, (le premier) |
|||
boundBoxLX = boundBox_.XLength |
|||
boundBoxLY = boundBox_.YLength |
|||
boundBoxLZ = boundBox_.ZLength |
|||
except: |
|||
boundBox_ = 0.0 |
|||
boundBoxLX = 0.0 |
|||
boundBoxLY = 0.0 |
|||
boundBoxLZ = 0.0 |
|||
boundBox_S = "" |
|||
# volume de tous les objets |
|||
volume_ = 0.0 |
|||
try: |
|||
for i in range(len(sel)): |
|||
volume_ += sel[i].Shape.Volume |
|||
except: |
|||
volume_ = 0.0 |
|||
# surface de tous les objets |
|||
surface = 0.0 |
|||
try: |
|||
for i in range(len(sel)): |
|||
surface += sel[i].Shape.Area |
|||
except: |
|||
surface = 0.0 |
|||
boundBox_S = "[X: "+str(boundBoxLX)+" mm] x [Y: "+str(boundBoxLY)+" mm] x [Z:"+str(boundBoxLZ)+" mm]" |
|||
App.Console.PrintMessage("Original boundBox : "+boundBox_S+"\r\n") |
|||
App.Console.PrintMessage("Original volume_ : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n") |
|||
App.Console.PrintMessage("Original surface : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n") |
|||
App.Console.PrintMessage("- - - - - - - - - -"+"\r\n") |
|||
try: |
|||
obj = comptName = "" |
|||
for copies in range(1,copyNumber+1): ##### Boucle copies Debut ########################### |
|||
if copyNumber > 1: |
|||
comptName = str(copies) |
|||
if cloneCopy == 1: # clone ok |
|||
import Draft |
|||
mess = "Clone" |
|||
obj=Draft.clone(sel) |
|||
obj.Scale = (uniteM_X, uniteM_Y, uniteM_Z) |
|||
if self.checkBox.isChecked(): # if checkbox is checked then .... increment |
|||
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment |
|||
else: |
|||
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)) |
|||
oL = obj.Label[:5] + " " + comptName + " " + obj.Label[6:] |
|||
obj.Label = oL |
|||
if cloneCopy == 0: # copy ok |
|||
import Draft |
|||
mess = "Copy " |
|||
for i in range(len(sel)): |
|||
obj = Draft.scale(sel[i],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0),copy=True,legacy=True) |
|||
if self.checkBox.isChecked(): # if checkbox is checked then .... increment |
|||
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment |
|||
else: |
|||
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)) |
|||
obj.Label = "Copy " + comptName + " of " + obj.Label |
|||
if cloneCopy == 2: # compound ok |
|||
import Draft |
|||
mess = "Compount " |
|||
liste = [] |
|||
######################################################################################################################## |
|||
# objori = Draft.makeBlock(Gui.Selection.getSelection()) # create Block other method compound |
|||
# obj = Draft.scale([objori],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0)) |
|||
# App.activeDocument().removeObject(objori.Name) |
|||
######################################################################################################################## |
|||
####################################################################################################################### |
|||
objori = App.activeDocument().addObject("Part::Compound","Compound") # create method compound |
|||
for i in range(len(sel)): |
|||
objori.Links += App.activeDocument().getObject(sel[i].Name), |
|||
liste.append(sel[i].Name) |
|||
obj = Draft.scale([objori],delta=App.Vector(uniteM_X, uniteM_Y, uniteM_Z),center=App.Vector(0,0,0)) |
|||
####################################################################################################################### |
|||
# try: # optional delette the original objects |
|||
# App.activeDocument().removeObject(objori.Name) |
|||
# for i in liste: |
|||
# App.activeDocument().removeObject(i) |
|||
# except: |
|||
# None |
|||
if self.checkBox.isChecked(): # if checkbox is checked then .... increment |
|||
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)).multiply(App.activeDocument().getObject(obj.Name).Placement) # increment |
|||
else: |
|||
obj.Placement=App.Placement(App.Vector(placement_X,placement_Y,placement_Z), App.Rotation(Yaw_Z,Pitch_Y,Roll_X), App.Vector(0,0,0)) |
|||
obj.Label = "Compount " + comptName + " of " + obj.Label |
|||
try: |
|||
objori.Label = "Ori " + obj.Label # renamme the original object |
|||
except Exception: |
|||
None |
|||
##### Boucle copies Fin ########################### |
|||
FreeCAD.ActiveDocument.recompute() |
|||
# print "[ ",placement_X," ",placement_Y," ",placement_Z," ] [ ",Yaw_Z," ",Pitch_Y," ",Roll_X," ]" |
|||
# boundinbox (dimensions hors tout) |
|||
try: |
|||
boundBox_ = obj.Shape.BoundBox |
|||
boundBoxLX = boundBox_.XLength |
|||
boundBoxLY = boundBox_.YLength |
|||
boundBoxLZ = boundBox_.ZLength |
|||
except: |
|||
boundBox_ = 0.0 |
|||
boundBoxLX = 0.0 |
|||
boundBoxLY = 0.0 |
|||
boundBoxLZ = 0.0 |
|||
# volume |
|||
volume_ = 0.0 |
|||
try: |
|||
volume_ = obj.Shape.Volume |
|||
except: |
|||
for i in range(len(obj)): |
|||
volume_ += obj[i].Shape.Volume |
|||
# surface |
|||
surface = 0.0 |
|||
try: |
|||
surface = obj.Shape.Area |
|||
except: |
|||
for i in range(len(obj)): |
|||
surface += obj[i].Shape.Area |
|||
App.Console.PrintMessage(obj.Label+"\r\n") |
|||
App.Console.PrintMessage("Convert mm in ' "+uniteMs+" ' (1 "+uniteMs+" = "+str(uniteM)+" mm)"+"\r\n") |
|||
App.Console.PrintMessage(mess + " boundBox_X : "+str(boundBoxLX)+" mm"+"\r\n") |
|||
App.Console.PrintMessage(mess + " boundBox_Y : "+str(boundBoxLY)+" mm"+"\r\n") |
|||
App.Console.PrintMessage(mess + " boundBox_Z : "+str(boundBoxLZ)+" mm"+"\r\n") |
|||
App.Console.PrintMessage(mess + " volume : "+str(volume_)+" mm3 ("+str(len(sel))+" element(s))"+"\r\n")# |
|||
App.Console.PrintMessage(mess + " surface : "+str(surface)+" mm2 ("+str(len(sel))+" element(s))"+"\r\n")# |
|||
#### Chrono end ########################################################################### chrono end |
|||
arrivee = time.clock() #### chrono end |
|||
App.Console.PrintMessage("Time : "+str("%.2f" % ((arrivee - depart)/60))+" min"+"\r\n")#### chrono end |
|||
#### Chrono end ########################################################################### chrono end |
|||
App.Console.PrintMessage("___________________"+"\r\n") |
|||
self.pushButton_1.setStyleSheet("background-color: green") |
|||
except Exception: |
|||
FreeCAD.Console.PrintError("Error interne"+"\r\n") |
|||
else: |
|||
self.pushButton_1.setStyleSheet("background-color: red")#red |
|||
self.pushButton_1.setToolTip(_translate("MainWindow", "Not object selected for Convert or copy", None)) |
|||
FreeCAD.Console.PrintError("Select an object"+"\r\n") #App.Console.PrintMessage |
|||
sel = "" |
|||
def on_pushButton02_clicked(self): # Bouton Quitter |
|||
App.Console.PrintMessage("End CloneConvert\r\n") |
|||
self.window.hide() |
|||
sel = FreeCADGui.Selection.getSelection() |
|||
MainWindow = QtGui.QMainWindow() |
|||
ui = Ui_MainWindow(MainWindow) |
|||
MainWindow.show() |
|||
</syntaxhighlight> |
|||
<translate> |
|||
==Revision== <!--T:19--> |
|||
14/06/2016 ver 0.9 = adding the choice of number of copies and labels optimization |
14/06/2016 ver 0.9 = adding the choice of number of copies and labels optimization |
||
Line 1,067: | Line 166: | ||
09/05/2014 ver. 0.2 = adding function "Copy" |
09/05/2014 ver. 0.2 = adding function "Copy" |
||
</translate> |
</translate> |
||
<languages/> |
Latest revision as of 16:02, 20 May 2021
Description |
---|
Latest update: GUI modified for HiDPI support (QGridLayout). Runs ≥v0.18 (PySide2 Qt5) For previous versions see Macro_CloneConvert and install manually. |
Author |
mario52 |
Download |
ToolBar Icon |
Links |
Macros recipes How to install macros How to customize toolbars |
Macro Version |
0.15 |
Date last modified |
2020-06-06 |
FreeCAD Version(s) |
≥0.18 |
Default shortcut |
None |
See also |
None |
Description
Creates a clone or copy of the object and then converts it into a chosen position and size (inch, mm, m, µm...) or free. The base object is recognized in mm (FreeCAD base)
Temporary code for external macro link. Do not use this code. This code is used exclusively by Addon Manager. Link for optional manual installation: Macro
# This code is copied instead of the original macro code # to guide the user to the online download page. # Use it if the code of the macro is larger than 64 KB and cannot be included in the wiki # or if the RAW code URL is somewhere else in the wiki. from PySide import QtGui, QtCore diag = QtGui.QMessageBox(QtGui.QMessageBox.Information, "Information", "This macro must be downloaded from this link\n" "\n" "https://gist.githubusercontent.com/mario52a/9f2f2f6144e1307a048f1840ef99300c/raw/39bc54e90b80053a5af76b0b17694cb53697aebd/Macro_CloneConvert.FCMacro" + "\n" "\n" "Quit this window to access the download page") diag.setWindowFlags(QtCore.Qt.WindowStaysOnTopHint) diag.setWindowModality(QtCore.Qt.ApplicationModal) diag.exec_() import webbrowser webbrowser.open("https://gist.githubusercontent.com/mario52a/9f2f2f6144e1307a048f1840ef99300c/raw/39bc54e90b80053a5af76b0b17694cb53697aebd/Macro_CloneConvert.FCMacro")
Usage
- Run the macro
- Set the XYZ settings
- Choose "Clone" or "Copy"
- Choose a measurement unit
- Select your object
- Click Ok
Notes
- If no value is entered a copy or clone will be created without modification.
- If no object is selected the Ok button will be colored in red.
The value of the BoundingBox, Volume and Surface is displayed in the Report view, in the case of Copy multiple object, the display will show BoundingBox 0.0.
The base is the mm example with a 1 mm side of cube:
Select in the comboBox inch, 1 inch = 25.4 mm , the fields "Scale free" automatically adjusts to 25.4 (the values in "Scale-free" can be changed separately). Click Ok button, the clone created will have 25,4 mm x 25,4 mm x 25,4 mm
150% = 1,50 in the "Scale free" fields
104% = 1,04 in the "Scale free" fields
Inverse operation :
If you want to reduce an object ex: a cube 25.4 mm (1 inch) in cube 1 mm sides, use the following formula, 1 / 25.4 = 0.0393700 and enter the value 0,0393700 (with comma) in the Scale field XY and Z.
In a cube of 5 mm, made 5 / 25.4 = 0.1968503 and enter the value 0,1968503 (with comma) in the Scale field XY and Z.
50% = 0,50 in the "Scale free" fields
4% = 0,04 in the "Scale free" fields
Predefined units are:
km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique.
- Mode
- Clone : The object(s) clone are create
- Copy : One copy of the objet(s) is create
- Comp : One compound of the objet(s) is create
- Increm. : incrementing the coordinates data to the original coordinates of the object (Placement, Rotation ...)
If this is not checked the Placement begin in coordinates 0,0,0 of FreeCAD
In case a compound Placement information is [0,0,0] the Placement begin in the position of object
If the real location is away from the base coordinates 0,0,0 use the ValueAt() button for the real Placement of the subObject selected Face, Wire, Line .... - Unique : If this checkBox is checked and multiple object selected, the clone created is one unique object
- Coordinates
- ... : This button align the YZ values on the value of X to have the same values XYZ (or manually). Two click reset the coordinates values to 0.0
- Coordinate X : Move the copy to the Coordinate X selected (Base 0,0,0 if Increm. is not checked)
- Coordinate Y : Move the copy to the Coordinate Y selected (Base 0,0,0 if Increm. is not checked)
- Coordinate Z : Move the copy to the Coordinate Z selected (Base 0,0,0 if Increm. is not checked)
- Rotation
- ... : This button align the Pitch and Roll values on the value of Yaw to have the same values Rotation (or manually)
Two click reset the rotations values to 0.0 - Yaw (Z ) : Rotate the copy to the axis Z (Yaw) (Begin 0 if Increm. is not checked)
- Pitch ( Y ) : Rotate the copy to the axis Y (Pitch) (Begin 0 if Increm. is not checked)
- Roll ( X ) : Rotate the copy to the axis X (Roll) (Begin 0 if Increm. is not checked)
- Scale predefined
- Scale predefined : predefined scales in units, km, hm, dam, m, dm, cm, mm, µm, nm, inch, link, foot, yard, perch, chain, furlong, mile, league, nautique or choose a free value in the Scale free field.
- Number copy
- Number copy : number of copies
- Scale free
- ... : This button align the Scales values on the value of Scale X to have the same values XYZ (or manually)
Two click reset the scales values to 1.0 - Scale X : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the X axis, to reduce the shape give a decimal value (0,5)
- Scale Y : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the Y axis, to reduce the shape give a decimal value (0,5)
- Scale Z : free scale , if the value is negative ( -10) , the object is scaled x 10 and will be reversed in the Z axis, to reduce the shape give a decimal value (0,5)
- ValueAt() : Give the valueAt() the subObject selected Face, Wire, Line ...
This option is useful in case a compound Placement information [0,0,0] and its real location is away from the base coordinates 0,0,0 (gives no provide information about the rotation of the object) - Ok : the OK button validates and launches the command, if no object is selected the Ok button will be coloured in red
- Reset : the Reset button puts all the values to zero
- Quit : the Quit button exit the macro
Script
Macro_CloneConvert.FCMacro
Download the macro to Gist Macro_CloneConvert.FCMacro
Revision
06/06/2020 ver 0.15 = icon
20/05/2020 ver 0.14 = grid layout PySide2 Qt5
15/09/2019 ver 0.13 = replace the grec sign micro to "um", replace all "_translate("MainWindow", "mm", None)" to "mm" and comment line "text.encode('utf-8')" cause not work with FC 0.19 18.213
01/06/2019 ver 0.12 = adapted for 0.19 et correction "Copy:legacy=True" and ShapeColor .....
30/03/2018 ver 0.11 = odd checkBox, if multi selection the clone are object unique or object separate
07/06/2017 ver 0.10 = replace Draft...Copy to Part..Shape cause section Copy : not draw copy scaled of object but copy not scaled ??
14/06/2016 ver 0.9 = adding the choice of number of copies and labels optimization
31/01/2016 ver 0.8 = modify the buttons reset section for two click for reset (in case modification the value)
30/01/2016 ver 0.7 = rewriting code with Placement and Increment and adding buttons Compound, Increment, ValueAt(),
26/01/2016 ver 0.6 = correction placement with many objets Copy
26/07/2015 ver 0.5 = correction rotate many objects Function Copy
25/07/2015 ver 0.4 = adding rotation
11/08/2014 replace "AttributeError" to "Exception"
02/07/2014 ver. 0.3 = modified to operate PyQt4 and PySide
09/05/2014 ver. 0.2 = adding function "Copy"