Macro CartoucheFC/it: Difference between revisions
m (Robot: Automated text replacement (-https://sourceforge.net/apps/phpbb/free-cad +http://forum.freecadweb.org)) |
(Updating to match new version of source page) |
||
Line 1: | Line 1: | ||
⚫ | |||
==Compilare la tabella del foglio di disegno== |
|||
⚫ | |||
==Descrizione== |
|||
Questa macro è una applicazione completa che permette di compilare tutti i campi della tabella della [[Drawing_Landscape_A3/it|squadratura]] fornita con FreeCAD. |
|||
<br><br> |
|||
⚫ | |||
⚫ | |||
==Utilizzo== |
|||
This macro is a complete application, it allows to fill simply all the fields of the cartridge of the drawing sheet delivered with FreeCAD. |
|||
'''Per il momento, modificare la pagine A3_Landscape.svg con [http://inkscape.org/?lang=fr Inkscape] può disturbare il buono funzionamento del programma. Se volete togliere il simbolo di regione (circolo e trapezio) dal foglio, lavorate su una copia di A3_Landscape.svg ! Lo stesso problema si trova anche su FreeCAD''' |
|||
'''Notare: Non sono accettati alcuni caratteri come & $ (e forse anche altri caratteri speciali).''' |
|||
⚫ | |||
⚫ | |||
*La finestra rimane sovrapposta alle altre finestre e viene utilizzata per controllare la tabella senza uscire dal programma principale. |
|||
*Copiare il codice in un file denominato '''Macro_CartoucheFC.py''' e posizionarlo nella directory delle macro. |
|||
⚫ | |||
*All'avvio, il programma registra in memoria tutti i dati già presenti nella tabella del foglio (se è compilata), tutti i dati sono restituiti automaticamente utilizzando il pulsante {{KEY/it|Memo}} e tenuti in memoria fino alla chiusura del programma. |
|||
*I pulsanti data {{KEY/it| D.}} e ora {{KEY/it| H.}} visualizzano la data e l'ora del sistema. |
|||
:*Il formato della data dipende dal simbolo selezionato: '''EU''' oppure '''US''', che determina la localizzazione del formato. La commutazione non avviene automaticamente (se è stata inserita manualmente una data), quando si modifica il simbolo è necessario fare di nuovo clic sul pulsante della data (controllare prima di stampare). |
|||
⚫ | |||
*Il campo '''A3''' non è modicabile (questo programma è basato sulla tabella del foglio A3 di FreeCAD). |
|||
'''Changing the map in Inkscape can at the moment cause operation problems in the program (where you remove the symbol on the worksheet, same problem with FreeCAD), work on a copy of A3_Landscape.svg.'''<br /> |
|||
'''PS: Some characters such as & $ are not accepted (and possibly other special characters).''' |
|||
⚫ | |||
*Il pulsante {{KEY/it|Symbole EU}} o US commuta il simbolo di proiezione "Scegli il tuo simbolo" che per impostazione predefinita viene visualizzato. Fare clic sul pulsante e controllare il simbolo sul foglio, fare clic una seconda volta per cambiare il simbolo. |
|||
*The window remains above other Windows, thereby controlling the cartridge without leaving the program. |
|||
*Copy the code into a file named '''Macro_CartoucheFC.py''' and place it in your usual macros directory. |
|||
⚫ | |||
*At the opening, the program will register in memory all data already present in the cartridge of the sheet (if they are filled), all these data will be automatically returned to using the button {{KEY| Memo}} and kept in memory until the closure of the programme. |
|||
*Date button {{KEY| D.}} and time {{KEY| H.}} displayed the date and time of the system. |
|||
:*The date format depends on the selected symbol '''EU''' or '''US''' which determines the regional format. Change does not happen automatically (for the case or you have entered a date manually) you must again click buttons dates if you change the symbol (check before printing). |
|||
*The field '''A3''' is not functional (this program is based on the the A3 of FreeCAD sheet cartridge). |
|||
*Button {{KEY|Symbole EU}} or US change the meaning of the symbol of projection "Select your Symbol" is displayed by default, and then the active symbol appears. Click on the button and check the leaf symbol, click a second time to modify the symbol. |
|||
⚫ | |||
:*'''Attention''': this command does not pass through the button {{KEY|Apply}} and immediately changes the symbol to each presses on the key, always check if you have the appropriate symbol on your worksheet. |
|||
*Button {{KEY|Clean}} Clears all fields in the cartridge. You can revert to the original data using the button {{KEY|Memo}}. |
|||
*Button {{KEY|Apply}} saves all fields of the cartridge in the sheet. You can revert to the original data using the button {{KEY|Memo}} (except for the regional symbol that works in independent and is effective immediately). |
|||
===Code=== |
|||
⚫ | |||
⚫ | |||
:*'''Attenzione:''' Questo comando non passa attraverso il pulsante {{KEY/it| Applica}} e commuta direttamente il simbolo ad ogni pressione del tasto, verificare sempre sul vostro foglio se il simbolo è corretto. |
|||
<syntaxhighlight> |
|||
*Il pulsante {{KEY/it|Clean}} cancella tutti i campi del modulo. È possibile ripristinare i dati originali utilizzando il pulsante {{KEY/it|Memo}}. |
|||
*Il pulsante {{KEY/it| Apply}} salva tutti i campi del modulo nel foglio. È possibile ripristinare i dati originali utilizzando il pulsante {{KEY/it|Memo}} (tranne che per i simboli localizzati che lavorano in modo indipendente e sono immediatamente attivi). |
|||
==Codice== |
|||
⚫ | |||
<pre> |
|||
# -*- coding: utf-8 -*- |
# -*- coding: utf-8 -*- |
||
# Macro_CartoucheFC.py |
# Macro_CartoucheFC.py |
||
Line 881: | Line 870: | ||
MainWindow.show() |
MainWindow.show() |
||
</syntaxhighlight> |
|||
</pre> |
|||
⚫ | |||
I campi non hanno nessun limite di lunghezza, controllare la tabella. |
|||
===Other=== |
|||
Questo programma crea nel progetto il simbolo regionale di proiezione, non toccatelo viene salvato come nascosto, in modo invisibile. |
|||
The fields have no length limit, check your cartouche.<br /> |
|||
This program creates a drawing representing the regional projection symbol on your project, do not touch it is registered therefore hidden form invisible.<br /> |
|||
If you want it to be cleared uncomment the commented lines and vice versa |
|||
<syntaxhighlight> |
|||
Se si desidera cancellarlo, rimuovere il segno di commento a queste righe e viceversa. |
|||
<pre> |
|||
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU") |
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU") |
||
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False |
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False |
||
et |
|||
e |
|||
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US") |
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US") |
||
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False |
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False |
||
</syntaxhighlight> |
|||
</pre> |
|||
(a volte si produce un errore di esecuzione quando il simbolo viene cancellato) |
|||
Questo modulo funziona con il foglio di disegno incluso in FreeCAD che si chiama '''Page''', non cambiare il nome di questo foglio! |
|||
(I had some times an error in execution when the symbol was erased)<br /> |
|||
<br> |
|||
This module works with the drawing sheet included in FreeCAD this sheet is called '''Page''', do not change the name of this sheet! |
|||
{{languages/it | {{en|Macro_CartoucheFC}} {{fr|Macro_CartoucheFC/fr}} }} |
|||
[[Category:Python Code/it]] |
|||
⚫ | |||
<languages/> |
Revision as of 18:00, 25 December 2013
File:Text-x-python Macro_CartoucheFC |
Description |
---|
This macro is a complete application, it allows to fill the cartridge of the drawing sheet delivered with FreeCAD. Author: Mario52 |
Author |
Mario52 |
Download |
None |
Links |
Macros recipes How to install macros How to customize toolbars |
Macro Version |
1.0 |
Date last modified |
None |
FreeCAD Version(s) |
None |
Default shortcut |
None |
See also |
None |
This macro is a complete application, it allows to fill simply all the fields of the cartridge of the drawing sheet delivered with FreeCAD.
Use
Changing the map in Inkscape can at the moment cause operation problems in the program (where you remove the symbol on the worksheet, same problem with FreeCAD), work on a copy of A3_Landscape.svg.
PS: Some characters such as & $ are not accepted (and possibly other special characters).
If you have any questions or want to add a function, you can address you on the french forum Remplir cartouche
- The window remains above other Windows, thereby controlling the cartridge without leaving the program.
- Copy the code into a file named Macro_CartoucheFC.py and place it in your usual macros directory.
- After you have created your drawing sheet using the Drawing of FreeCAD module, run the macro Macro_CartoucheFC.
- At the opening, the program will register in memory all data already present in the cartridge of the sheet (if they are filled), all these data will be automatically returned to using the button Memo and kept in memory until the closure of the programme.
- Date button D. and time H. displayed the date and time of the system.
- The date format depends on the selected symbol EU or US which determines the regional format. Change does not happen automatically (for the case or you have entered a date manually) you must again click buttons dates if you change the symbol (check before printing).
- The field A3 is not functional (this program is based on the the A3 of FreeCAD sheet cartridge).
- Button Symbole EU or US change the meaning of the symbol of projection "Select your Symbol" is displayed by default, and then the active symbol appears. Click on the button and check the leaf symbol, click a second time to modify the symbol.
- The choice of this symbol, affects the date format EU = dd/MM/yyyy and US = MM/dd/yyyy.
- Attention: this command does not pass through the button Apply and immediately changes the symbol to each presses on the key, always check if you have the appropriate symbol on your worksheet.
- Button Clean Clears all fields in the cartridge. You can revert to the original data using the button Memo.
- Button Apply saves all fields of the cartridge in the sheet. You can revert to the original data using the button Memo (except for the regional symbol that works in independent and is effective immediately).
Code
Macro_CartoucheFC.FcMacro
# -*- coding: utf-8 -*-
# Macro_CartoucheFC.py
# Remplir les zones du cartouche
# il faut que la page (drawing viewer) s'appelle " Page " qui est le nom par défaut du module Drawing
# Fill the area of the cartridge
# It is necessary that the page (drawing viewer) is called "Page", which is the default name of the Drawing module
# Python 2.6
# Created: 27/04/2013 revision 02/05/2013 (accepte les accentués)
# Created: by mario52
import Draft, Part, FreeCAD, math, PartGui, FreeCADGui, PyQt4
from math import sqrt, pi, sin, cos, asin
from FreeCAD import Base
from PyQt4 import QtCore, QtGui
global path
path = FreeCAD.ConfigGet("AppHomePath")
def heure():
return QtCore.QTime().currentTime().toString('hh:mm:ss')
def dateEu():
return QtCore.QDate().currentDate().toString('dd/MM/yyyy') # forme euro
def dateUs():
return QtCore.QDate().currentDate().toString('MM/dd/yyyy') # forme us
def dateComp():
return QtCore.QDate().currentDate().toString('dddd d MMMM yyyy') # Retourne "dimanche 20 Juillet 69"
try:
_fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
def _fromUtf8(s):
return s
try:
_encoding = QtGui.QApplication.UnicodeUTF8
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
def _translate(context, text, disambig):
return QtGui.QApplication.translate(context, text, disambig)
def errorDialog(msg):
# Create a simple dialog QMessageBox
# The first argument indicates the icon used: one of QtGui.QMessageBox.{NoIcon, Information, Warning, Critical, Question}
diag = QtGui.QMessageBox(QtGui.QMessageBox.Critical,u"Error Message",msg )
diag.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenêtre en avant
#diag.setWindowModality(QtCore.Qt.ApplicationModal) # la fonction a été désactivée pour favoriser "WindowStaysOnTopHint"
diag.exec_()
def symbol_EU(depx,depy): # création du symbol_EU
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
except:
None
App.activeDocument().addObject('Sketcher::SketchObject','Symbol_EU')
App.activeDocument().Symbol_EU.Placement = App.Placement(App.Vector(0.0,0.0,0.0),App.Rotation(0.000000,0.000000,0.000000,1.000000))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(-7.5,0.0,0.0),App.Vector(20.0,0.0,0.0)))
App.ActiveDocument.Symbol_EU.Placement = App.Placement(App.Vector(0.0,0.0),App.Rotation(0.000000,0.000000,0.000000,1.000000))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(12.50,-7.5,0),App.Vector(12.50,7.5,0.0)))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Circle(App.Vector(12.50,0.0,0),App.Vector(0,0,1),2.5))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Circle(App.Vector(12.50,0.0,0),App.Vector(0,0,1),5.0))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,5.0,0.0),App.Vector(-5.0,2.5,0.0)))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(-5.0,-2.5,0.0),App.Vector(-5.0,2.5,0.0)))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,-5.0,0.0),App.Vector(-5.0,-2.5,0.0)))
App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,-5.0,0.0),App.Vector(5.0,5.0,0.0)))
Gui.getDocument(App.ActiveDocument.Name).resetEdit()
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").LineColor = (0.00,0.00,0.00)
App.ActiveDocument.recompute()
App.activeDocument().addObject('Drawing::FeatureViewPart','SymbolEU')
App.activeDocument().SymbolEU.Source = App.activeDocument().Symbol_EU
App.activeDocument().SymbolEU.Direction = (0.0,0.0,1.0)
App.activeDocument().SymbolEU.X = depx
App.activeDocument().SymbolEU.Y = depy
App.activeDocument().SymbolEU.Scale = 0.8
App.activeDocument().Page.addObject(App.activeDocument().SymbolEU)
App.ActiveDocument.recompute()
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False
def symbol_US(depx,depy): # création du symbol_US
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
except:
None
App.activeDocument().addObject('Sketcher::SketchObject','Symbol_US')
App.activeDocument().Symbol_US.Placement = App.Placement(App.Vector(0.0,0.0,0.0),App.Rotation(0.000000,0.000000,0.000000,1.000000))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(-7.5,0.0,0.0),App.Vector(20.0,0.0,0.0)))
App.ActiveDocument.Symbol_US.Placement = App.Placement(App.Vector(0.0,0.0),App.Rotation(0.000000,0.000000,0.000000,1.000000))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(0.0,-7.5,0.0),App.Vector(0.0,7.5,0.0)))
App.ActiveDocument.Symbol_US.addGeometry(Part.Circle(App.Vector(0.0,0.0,0.0),App.Vector(0,0,1),2.5))
App.ActiveDocument.Symbol_US.addGeometry(Part.Circle(App.Vector(0.0,0.0,0.0),App.Vector(0,0,1),5.0))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,5.0,0.0),App.Vector(7.5,2.5,0.0)))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(7.5,-2.5,0.0),App.Vector(7.5,2.5,0.0)))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,-5.0,0.0),App.Vector(7.5,-2.5,0.0)))
App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,-5.0,0.0),App.Vector(17.5,5.0,0.0)))
Gui.getDocument(App.ActiveDocument.Name).resetEdit()
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").LineColor = (0.00,0.00,0.00)
App.ActiveDocument.recompute()
App.activeDocument().addObject('Drawing::FeatureViewPart','SymbolUS')
App.activeDocument().SymbolUS.Source = App.activeDocument().Symbol_US
App.activeDocument().SymbolUS.Direction = (0.0,0.0,1.0)
App.activeDocument().SymbolUS.X = depx
App.activeDocument().SymbolUS.Y = depy
App.activeDocument().SymbolUS.Scale = 0.8
App.activeDocument().Page.addObject(App.activeDocument().SymbolUS)
App.ActiveDocument.recompute()
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False
try:
DESIGNED_BY = App.activeDocument().getObject("Page").EditableTexts[0] #lineEdit01 DESIGNED_BY
CREATION_DATE = App.activeDocument().getObject("Page").EditableTexts[1] #lineEdit02 CREATION_DATE date
CREA_DATE = CREATION_DATE[0:10] # lineEdit02h date
CREA_TIME = CREATION_DATE[13:21] # lineEdit02h heure
CHECKED_BY = App.activeDocument().getObject("Page").EditableTexts[2] # lineEdit03
CHECK_DATE = App.activeDocument().getObject("Page").EditableTexts[3] # lineEdit04 date
CHEC_DATE = CHECK_DATE[0:10] # lineEdit04 date
CHEC_TIME = CHECK_DATE[13:21] # lineEdit04h heure
SIZE = "A3" # lineEdit05
SCALE = App.activeDocument().getObject("Page").EditableTexts[4] # lineEdit06
WEIGHT = App.activeDocument().getObject("Page").EditableTexts[5] # lineEdit07
DRAWING_NUMBER = App.activeDocument().getObject("Page").EditableTexts[6]# lineEdit08
SHEET = App.activeDocument().getObject("Page").EditableTexts[7] # lineEdit09
TITLE = App.activeDocument().getObject("Page").EditableTexts[8] # textEdit_01
DESCRIPTION = App.activeDocument().getObject("Page").EditableTexts[9] # textEdit_02
except:
errorDialog("Error reading in the cartridge")
else:
try:
try:
lineEdit18 = App.activeDocument().getObject("Note_I").Text[0]
except:
lineEdit18 = ""
try:
lineEdit17 = App.activeDocument().getObject("Note_H").Text[0]
except:
lineEdit17 = ""
try:
lineEdit16 = App.activeDocument().getObject("Note_G").Text[0]
except:
lineEdit16 = ""
try:
lineEdit15 = App.activeDocument().getObject("Note_F").Text[0]
except:
lineEdit15 = ""
try:
lineEdit14 = App.activeDocument().getObject("Note_E").Text[0]
except:
lineEdit14 = ""
try:
lineEdit13 = App.activeDocument().getObject("Note_D").Text[0]
except:
lineEdit13 = ""
try:
lineEdit12 = App.activeDocument().getObject("Note_C").Text[0]
except:
lineEdit12 = ""
try:
lineEdit11 = App.activeDocument().getObject("Note_B").Text[0]
except:
lineEdit11 = ""
try:
lineEdit10 = App.activeDocument().getObject("Note_A").Text[0]
except:
lineEdit10 = ""
try:
lineEdit20 = App.activeDocument().getObject("CopyRight").Text[0]
except:
lineEdit20 = ""
except:
errorDialog("Error notes")
class Ui_MainWindow(object):
def __init__(self, MainWindow):
self.window = MainWindow
#___________________________________________________________________________________
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(810, 440)
MainWindow.setMaximumSize(QtCore.QSize(810, 480))
self.centralWidget = QtGui.QWidget(MainWindow)
self.centralWidget.setObjectName(_fromUtf8("centralWidget"))
# self.pushButton01 = QtGui.QPushButton(self.centralWidget)
# self.pushButton01.setGeometry(QtCore.QRect(115, 360, 93, 28))
# self.pushButton01.setObjectName(_fromUtf8("pushButton01"))
# self.pushButton01.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01
self.pushButton02 = QtGui.QPushButton(self.centralWidget)
self.pushButton02.setGeometry(QtCore.QRect(225, 360, 93, 28))
self.pushButton02.setObjectName(_fromUtf8("pushButton02"))
self.pushButton02.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02
self.pushButton03 = QtGui.QPushButton(self.centralWidget)
self.pushButton03.setGeometry(QtCore.QRect(335, 360, 93, 28))
self.pushButton03.setObjectName(_fromUtf8("pushButton03"))
self.pushButton03.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03
self.pushButton04 = QtGui.QPushButton(self.centralWidget)
self.pushButton04.setGeometry(QtCore.QRect(445, 360, 93, 28))
self.pushButton04.setObjectName(_fromUtf8("pushButton04"))
self.pushButton04.clicked.connect(self.on_pushButton04_clicked) #connection pushButton04
self.pushButton05 = QtGui.QPushButton(self.centralWidget)
self.pushButton05.setGeometry(QtCore.QRect(555, 360, 93, 28))
self.pushButton05.setObjectName(_fromUtf8("pushButton05"))
self.pushButton05.clicked.connect(self.on_pushButton05_clicked) #connection pushButton05
self.pushButton06 = QtGui.QPushButton(self.centralWidget)
self.pushButton06.setGeometry(QtCore.QRect(170, 56, 20, 20))
self.pushButton06.setObjectName(_fromUtf8("pushButton06"))
self.pushButton06.clicked.connect(self.on_pushButton06_clicked) #connection pushButton06
self.pushButton07 = QtGui.QPushButton(self.centralWidget)
self.pushButton07.setGeometry(QtCore.QRect(190, 56, 20, 20))
self.pushButton07.setObjectName(_fromUtf8("pushButton07"))
self.pushButton07.clicked.connect(self.on_pushButton07_clicked) #connection pushButton07
self.pushButton08 = QtGui.QPushButton(self.centralWidget)
self.pushButton08.setGeometry(QtCore.QRect(170, 136, 20, 20))
self.pushButton08.setObjectName(_fromUtf8("pushButton08"))
self.pushButton08.clicked.connect(self.on_pushButton08_clicked) #connection pushButton08
self.pushButton09 = QtGui.QPushButton(self.centralWidget)
self.pushButton09.setGeometry(QtCore.QRect(190, 136, 20, 20))
self.pushButton09.setObjectName(_fromUtf8("pushButton09"))
self.pushButton09.clicked.connect(self.on_pushButton09_clicked) #connection pushButton09
self.pushButton10 = QtGui.QPushButton(self.centralWidget)
self.pushButton10.setGeometry(QtCore.QRect(100, 220, 101, 20))
self.pushButton10.setObjectName(_fromUtf8("pushButton10"))
self.pushButton10.clicked.connect(self.on_pushButton10_clicked) #connection pushButton10
self.lineEdit_01 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_01.setGeometry(QtCore.QRect(20, 20, 181, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_01.setFont(font)
self.lineEdit_01.setObjectName(_fromUtf8("lineEdit_01"))
self.lineEdit_01.setText(DESIGNED_BY)
self.lineEdit_02 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_02.setGeometry(QtCore.QRect(20, 60, 82, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_02.setFont(font)
self.lineEdit_02.setObjectName(_fromUtf8("lineEdit_02"))
self.lineEdit_02.setText(CREA_DATE)
self.lineEdit_02h = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_02h.setGeometry(QtCore.QRect(98, 60, 72, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_02h.setFont(font)
self.lineEdit_02h.setObjectName(_fromUtf8("lineEdit_02h"))
self.lineEdit_02h.setText(CREA_TIME)
self.lineEdit_03 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_03.setGeometry(QtCore.QRect(20, 100, 181, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_03.setFont(font)
self.lineEdit_03.setObjectName(_fromUtf8("lineEdit_03"))
self.lineEdit_03.setText(CHECKED_BY)
self.lineEdit_04 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_04.setGeometry(QtCore.QRect(20, 140, 82, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_04.setFont(font)
self.lineEdit_04.setObjectName(_fromUtf8("lineEdit_04"))
self.lineEdit_04.setText(CHEC_DATE)
self.lineEdit_04h = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_04h.setGeometry(QtCore.QRect(98, 140, 72, 16))
font = QtGui.QFont()
font.setPointSize(7)
self.lineEdit_04h.setFont(font)
self.lineEdit_04h.setObjectName(_fromUtf8("lineEdit_04h"))
self.lineEdit_04h.setText(CHEC_TIME)
self.lineEdit_05 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_05.setGeometry(QtCore.QRect(20, 180, 61, 61))
font = QtGui.QFont()
font.setPointSize(17)
font.setBold(False)
font.setWeight(50)
self.lineEdit_05.setFont(font)
self.lineEdit_05.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_05.setObjectName(_fromUtf8("lineEdit_05"))
self.lineEdit_05.setText(SIZE)
self.lineEdit_06 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_06.setGeometry(QtCore.QRect(20, 280, 61, 41))
font = QtGui.QFont()
font.setPointSize(10)
self.lineEdit_06.setFont(font)
self.lineEdit_06.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_06.setObjectName(_fromUtf8("lineEdit_06"))
self.lineEdit_06.setText(SCALE)
self.lineEdit_07 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_07.setGeometry(QtCore.QRect(100, 280, 101, 41))
font = QtGui.QFont()
font.setPointSize(10)
self.lineEdit_07.setFont(font)
self.lineEdit_07.setAlignment(QtCore.Qt.AlignCenter)
self.lineEdit_07.setObjectName(_fromUtf8("lineEdit_07"))
self.lineEdit_07.setText(WEIGHT)
self.lineEdit_08 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_08.setGeometry(QtCore.QRect(220, 280, 341, 41))
self.lineEdit_08.setObjectName(_fromUtf8("lineEdit_08"))
self.lineEdit_08.setText(DRAWING_NUMBER)
self.lineEdit_09 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_09.setGeometry(QtCore.QRect(570, 280, 81, 41))
self.lineEdit_09.setObjectName(_fromUtf8("lineEdit_09"))
self.lineEdit_09.setText(SHEET)
self.lineEdit_10 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_10.setGeometry(QtCore.QRect(690, 290, 101, 30))
self.lineEdit_10.setObjectName(_fromUtf8("lineEdit_10"))
self.lineEdit_10.setText(lineEdit10)
self.lineEdit_11 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_11.setGeometry(QtCore.QRect(690, 260, 101, 30))
self.lineEdit_11.setObjectName(_fromUtf8("lineEdit_11"))
self.lineEdit_11.setText(lineEdit11)
self.lineEdit_12 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_12.setGeometry(QtCore.QRect(690, 230, 101, 30))
self.lineEdit_12.setObjectName(_fromUtf8("lineEdit_12"))
self.lineEdit_12.setText(lineEdit12)
self.lineEdit_13 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_13.setGeometry(QtCore.QRect(690, 200, 101, 30))
self.lineEdit_13.setObjectName(_fromUtf8("lineEdit_13"))
self.lineEdit_13.setText(lineEdit13)
self.lineEdit_14 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_14.setGeometry(QtCore.QRect(690, 170, 101, 30))
self.lineEdit_14.setObjectName(_fromUtf8("lineEdit_14"))
self.lineEdit_14.setText(lineEdit14)
self.lineEdit_15 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_15.setGeometry(QtCore.QRect(690, 140, 101, 30))
self.lineEdit_15.setObjectName(_fromUtf8("lineEdit_15"))
self.lineEdit_15.setText(lineEdit15)
self.lineEdit_16 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_16.setGeometry(QtCore.QRect(690, 110, 101, 30))
self.lineEdit_16.setObjectName(_fromUtf8("lineEdit_16"))
self.lineEdit_16.setText(lineEdit16)
self.lineEdit_17 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_17.setGeometry(QtCore.QRect(690, 80, 101, 30))
self.lineEdit_17.setObjectName(_fromUtf8("lineEdit_17"))
self.lineEdit_17.setText(lineEdit17)
self.lineEdit_18 = QtGui.QLineEdit(self.centralWidget)
self.lineEdit_18.setGeometry(QtCore.QRect(690, 50, 101, 30))
self.lineEdit_18.setObjectName(_fromUtf8("lineEdit_18"))
self.lineEdit_18.setText(lineEdit18)
self.lineEdit_20 = QtGui.QLineEdit(self.centralWidget) # Copyright
self.lineEdit_20.setGeometry(QtCore.QRect(20, 330, 771, 22))
self.lineEdit_20.setObjectName(_fromUtf8("lineEdit_20"))
self.lineEdit_20.setText(lineEdit20)
self.textEdit_01 = QtGui.QTextEdit(self.centralWidget)
self.textEdit_01.setGeometry(QtCore.QRect(220, 20, 431,60 ))
font = QtGui.QFont()
font.setPointSize(15)
font.setBold(True)
font.setWeight(75)
self.textEdit_01.setFont(font)
self.textEdit_01.setObjectName(_fromUtf8("textEdit_01"))
self.textEdit_01.setText(TITLE)
self.textEdit_02 = QtGui.QTextEdit(self.centralWidget)
self.textEdit_02.setGeometry(QtCore.QRect(220, 90, 431, 60))
self.textEdit_02.setObjectName(_fromUtf8("textEdit_02"))
self.textEdit_02.setText(DESCRIPTION)
# self.graphicsView_01 = QtGui.QGraphicsView(self.centralWidget)
# self.graphicsView_01.setGeometry(QtCore.QRect(100, 160, 101, 81))
# brush = QtGui.QBrush(QtGui.QColor(0, 170, 255))
# brush.setStyle(QtCore.Qt.NoBrush)
# self.graphicsView_01.setBackgroundBrush(brush)
# self.graphicsView_01.setObjectName(_fromUtf8("graphicsView_01"))
self.textEdit_03 = QtGui.QTextEdit(self.centralWidget)
self.textEdit_03.setGeometry(QtCore.QRect(100, 160, 101, 55))
self.textEdit_03.setAlignment(QtCore.Qt.AlignCenter)
self.textEdit_03.setObjectName(_fromUtf8("textEdit_03"))
self.textEdit_03.setText("Select your Symbol")
self.graphicsView_02 = QtGui.QGraphicsView(self.centralWidget)
self.graphicsView_02.setGeometry(QtCore.QRect(220, 160, 431, 81))
self.graphicsView_02.setObjectName(_fromUtf8("graphicsView_02"))
self.label_01 = QtGui.QLabel(self.centralWidget)
self.label_01.setGeometry(QtCore.QRect(20, 0, 91, 16))
self.label_01.setObjectName(_fromUtf8("label_01"))
self.label_02 = QtGui.QLabel(self.centralWidget)
self.label_02.setGeometry(QtCore.QRect(20, 40, 53, 16))
self.label_02.setObjectName(_fromUtf8("label_02"))
self.label_03 = QtGui.QLabel(self.centralWidget)
self.label_03.setGeometry(QtCore.QRect(20, 80, 101, 16))
self.label_03.setObjectName(_fromUtf8("label_03"))
self.label_04 = QtGui.QLabel(self.centralWidget)
self.label_04.setGeometry(QtCore.QRect(20, 120, 91, 16))
self.label_04.setObjectName(_fromUtf8("label_04"))
self.label_05 = QtGui.QLabel(self.centralWidget)
self.label_05.setGeometry(QtCore.QRect(20, 160, 53, 16))
self.label_05.setObjectName(_fromUtf8("label_05"))
self.label_06 = QtGui.QLabel(self.centralWidget)
self.label_06.setGeometry(QtCore.QRect(20, 260, 53, 16))
self.label_06.setObjectName(_fromUtf8("label_06"))
self.label_07 = QtGui.QLabel(self.centralWidget)
self.label_07.setGeometry(QtCore.QRect(100, 260, 101, 16))
self.label_07.setObjectName(_fromUtf8("label_07"))
self.label_08 = QtGui.QLabel(self.centralWidget)
self.label_08.setGeometry(QtCore.QRect(220, 260, 121, 16))
self.label_08.setObjectName(_fromUtf8("label_08"))
self.label_09 = QtGui.QLabel(self.centralWidget)
self.label_09.setGeometry(QtCore.QRect(570, 260, 53, 16))
self.label_09.setObjectName(_fromUtf8("label_09"))
self.label_10 = QtGui.QLabel(self.centralWidget)
self.label_10.setGeometry(QtCore.QRect(670, 290, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_10.setFont(font)
self.label_10.setObjectName(_fromUtf8("label_10"))
self.label_11 = QtGui.QLabel(self.centralWidget)
self.label_11.setGeometry(QtCore.QRect(670, 260, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_11.setFont(font)
self.label_11.setObjectName(_fromUtf8("label_11"))
self.label_12 = QtGui.QLabel(self.centralWidget)
self.label_12.setGeometry(QtCore.QRect(670, 230, 16, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_12.setFont(font)
self.label_12.setObjectName(_fromUtf8("label_12"))
self.label_13 = QtGui.QLabel(self.centralWidget)
self.label_13.setGeometry(QtCore.QRect(670, 200, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_13.setFont(font)
self.label_13.setObjectName(_fromUtf8("label_13"))
self.label_14 = QtGui.QLabel(self.centralWidget)
self.label_14.setGeometry(QtCore.QRect(670, 170, 15, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_14.setFont(font)
self.label_14.setObjectName(_fromUtf8("label_14"))
self.label_15 = QtGui.QLabel(self.centralWidget)
self.label_15.setGeometry(QtCore.QRect(670, 140, 14, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_15.setFont(font)
self.label_15.setObjectName(_fromUtf8("label_15"))
self.label_16 = QtGui.QLabel(self.centralWidget)
self.label_16.setGeometry(QtCore.QRect(670, 110, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_16.setFont(font)
self.label_16.setObjectName(_fromUtf8("label_16"))
self.label_17 = QtGui.QLabel(self.centralWidget)
self.label_17.setGeometry(QtCore.QRect(670, 80, 18, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_17.setFont(font)
self.label_17.setObjectName(_fromUtf8("label_17"))
self.label_18 = QtGui.QLabel(self.centralWidget)
self.label_18.setGeometry(QtCore.QRect(670, 50, 10, 33))
font = QtGui.QFont()
font.setPointSize(12)
font.setBold(True)
font.setWeight(75)
self.label_18.setFont(font)
self.label_18.setObjectName(_fromUtf8("label_18"))
self.label_19 = QtGui.QLabel(self.centralWidget)
self.label_19.setGeometry(QtCore.QRect(720, 15, 100, 33))
self.label_19.setObjectName(_fromUtf8("label_19"))
MainWindow.setCentralWidget(self.centralWidget)
self.menuBar = QtGui.QMenuBar(MainWindow)
self.menuBar.setGeometry(QtCore.QRect(0, 0, 810, 26))
self.menuBar.setObjectName(_fromUtf8("menuBar"))
MainWindow.setMenuBar(self.menuBar)
self.statusBar = QtGui.QStatusBar(MainWindow)
self.statusBar.setObjectName(_fromUtf8("statusBar"))
MainWindow.setStatusBar(self.statusBar)
self.retranslateUi(MainWindow)
QtCore.QMetaObject.connectSlotsByName(MainWindow)
def retranslateUi(self, MainWindow):
MainWindow.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint) # cette fonction met la fenêtre en avant
MainWindow.setWindowTitle(_translate("MainWindow", "Cartouche", None))
# self.pushButton01.setText(_translate("MainWindow", "Position", None))
self.pushButton02.setText(_translate("MainWindow", "Leave", None))
self.pushButton03.setText(_translate("MainWindow", "Memo", None))
self.pushButton04.setText(_translate("MainWindow", "Clean", None))
self.pushButton05.setText(_translate("MainWindow", "Apply", None))
self.pushButton06.setText(_translate("MainWindow", "D.", None))
self.pushButton07.setText(_translate("MainWindow", "H.", None))
self.pushButton08.setText(_translate("MainWindow", "D.", None))
self.pushButton09.setText(_translate("MainWindow", "H.", None))
self.pushButton10.setText(_translate("MainWindow", "Symbole EU", None))
self.label_01.setText(_translate("MainWindow", "Designed by :", None))
self.label_02.setText(_translate("MainWindow", "Date :", None))
self.label_03.setText(_translate("MainWindow", "Checked by :", None))
self.label_04.setText(_translate("MainWindow", "Date :", None))
self.label_05.setText(_translate("MainWindow", "Size :", None))
self.label_06.setText(_translate("MainWindow", "Scale :", None))
self.label_07.setText(_translate("MainWindow", "Weight (Kg) :", None))
self.label_08.setText(_translate("MainWindow", "Drawing number :", None))
self.label_09.setText(_translate("MainWindow", "Sheet :", None))
self.label_10.setText(_translate("MainWindow", "A", None))
self.label_11.setText(_translate("MainWindow", "B", None))
self.label_12.setText(_translate("MainWindow", "C", None))
self.label_13.setText(_translate("MainWindow", "D", None))
self.label_14.setText(_translate("MainWindow", "E", None))
self.label_15.setText(_translate("MainWindow", "F", None))
self.label_16.setText(_translate("MainWindow", "G", None))
self.label_17.setText(_translate("MainWindow", "H", None))
self.label_18.setText(_translate("MainWindow", "I", None))
self.label_19.setText(_translate("MainWindow", "Notes", None))
#______________________________________________________________________________________
# Boutons
def on_pushButton10_clicked(self): # Bouton /Symbole
if self.textEdit_03.toPlainText()=="Symbole US":
self.pushButton10.setText(_translate("MainWindow", "Symbole US", None))
self.textEdit_03.setText("Symbole EU")
symbol_EU(247.5,263.5) #(247.5,263.5)
else:
self.pushButton10.setText(_translate("MainWindow", "Symbole EU", None))
self.textEdit_03.setText("Symbole US")
symbol_US(247.5,263.5) #(247.5,263.5)
def on_pushButton09_clicked(self): # Bouton /heure document
self.lineEdit_04h.setText(str(heure()))
def on_pushButton08_clicked(self): # Bouton date/ document
if self.textEdit_03.toPlainText()=="Symbole US":
self.lineEdit_04.setText(str(dateUs()))
else:
self.lineEdit_04.setText(str(dateEu()))
def on_pushButton07_clicked(self): # Bouton /heure checked
self.lineEdit_02h.setText(str(heure()))
def on_pushButton06_clicked(self): # Bouton date/ checked
if self.textEdit_03.toPlainText()=="Symbole US":
self.lineEdit_02.setText(str(dateUs()))
else:
self.lineEdit_02.setText(str(dateEu()))
def on_pushButton05_clicked(self): # Bouton Appliquer
DESIGNED_BY = unicode(self.lineEdit_01.text(), 'ISO-8859-1').encode('UTF-8')
CREATION_DATE = unicode(self.lineEdit_02.text()+" - "+self.lineEdit_02h.text() , 'ISO-8859-1').encode('UTF-8')
if CREATION_DATE == " - ":
CREATION_DATE = ""
CHECKED_BY = unicode(self.lineEdit_03.text() , 'ISO-8859-1').encode('UTF-8')
CHECK_DATE = unicode(self.lineEdit_04.text()+" - "+self.lineEdit_04h.text() , 'ISO-8859-1').encode('UTF-8')
if CHECK_DATE == " - ":
CHECK_DATE = ""
SIZE = "A3" # self.lineEdit_05.text()
SIZE = unicode(self.lineEdit_05.text() , 'ISO-8859-1').encode('UTF-8')
SCALE = unicode(self.lineEdit_06.text() , 'ISO-8859-1').encode('UTF-8')
WEIGHT = unicode(self.lineEdit_07.text() , 'ISO-8859-1').encode('UTF-8')
DRAWING_NUMBER = unicode(self.lineEdit_08.text() , 'ISO-8859-1').encode('UTF-8')
SHEET = unicode(self.lineEdit_09.text() , 'ISO-8859-1').encode('UTF-8')
TITLE = unicode(self.textEdit_01.toPlainText() , 'ISO-8859-1').encode('UTF-8')
DESCRIPTION = unicode(self.textEdit_02.toPlainText() , 'ISO-8859-1').encode('UTF-8')
SYMBOL = unicode(self.textEdit_03.toPlainText() , 'ISO-8859-1').encode('UTF-8')
try:
FreeCAD.getDocument (App.ActiveDocument.Name).getObject("Page").EditableTexts = [unicode(DESIGNED_BY, 'utf-8'),unicode(CREATION_DATE, 'utf-8'),unicode(CHECKED_BY, 'utf-8'),unicode(CHECK_DATE, 'utf-8'), unicode(SCALE, 'utf-8'), unicode(WEIGHT, 'utf-8'), unicode(DRAWING_NUMBER, 'utf-8'), unicode(SHEET, 'utf-8'), unicode(TITLE, 'utf-8'), unicode(DESCRIPTION, 'utf-8')]
except:
errorDialog("Error saving into the cartridge.")
try:
App.activeDocument().removeObject('Note_I')
except:
None
try:
App.activeDocument().removeObject('Note_H')
except:
None
try:
App.activeDocument().removeObject('Note_G')
except:
None
try:
App.activeDocument().removeObject('Note_F')
except:
None
try:
App.activeDocument().removeObject('Note_E')
except:
None
try:
App.activeDocument().removeObject('Note_D')
except:
None
try:
App.activeDocument().removeObject('Note_C')
except:
None
try:
App.activeDocument().removeObject('Note_B')
except:
None
try:
App.activeDocument().removeObject('Note_A')
except:
None
try:
App.activeDocument().removeObject('CopyRight')
except:
None
if self.lineEdit_18.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_I')
App.activeDocument().Note_I.X = 391.0
App.activeDocument().Note_I.Y = 232
App.activeDocument().Note_I.Scale = 3.0
App.activeDocument().Note_I.Text = str(unicode(self.lineEdit_18.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_I)
if self.lineEdit_17.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_H')
App.activeDocument().Note_H.X = 391.0
App.activeDocument().Note_H.Y = 238.8
App.activeDocument().Note_H.Scale = 3.0
App.activeDocument().Note_H.Text = str(unicode(self.lineEdit_17.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_H)
if self.lineEdit_16.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_G')
App.activeDocument().Note_G.X = 391.0
App.activeDocument().Note_G.Y = 245.4
App.activeDocument().Note_G.Scale = 3.0
App.activeDocument().Note_G.Text = str(unicode(self.lineEdit_16.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_G)
if self.lineEdit_15.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_F')
App.activeDocument().Note_F.X = 391.0
App.activeDocument().Note_F.Y = 252
App.activeDocument().Note_F.Scale = 3.0
App.activeDocument().Note_F.Text = str(unicode(self.lineEdit_15.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_F)
if self.lineEdit_14.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_E')
App.activeDocument().Note_E.X = 391.0
App.activeDocument().Note_E.Y = 258.6
App.activeDocument().Note_E.Scale = 3.0
App.activeDocument().Note_E.Text = str(unicode(self.lineEdit_14.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_E)
if self.lineEdit_13.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_D')
App.activeDocument().Note_D.X = 391.0
App.activeDocument().Note_D.Y = 265.2
App.activeDocument().Note_D.Scale = 3.0
App.activeDocument().Note_D.Text = str(unicode(self.lineEdit_13.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_D)
if self.lineEdit_12.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_C')
App.activeDocument().Note_C.X = 391.0
App.activeDocument().Note_C.Y = 271.8
App.activeDocument().Note_C.Scale = 3.0
App.activeDocument().Note_C.Text = str(unicode(self.lineEdit_12.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_C)
if self.lineEdit_11.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_B')
App.activeDocument().Note_B.X = 391.0
App.activeDocument().Note_B.Y = 278.4
App.activeDocument().Note_B.Scale = 3.0
App.activeDocument().Note_B.Text = str(unicode(self.lineEdit_11.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_B)
if self.lineEdit_10.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_A')
App.activeDocument().Note_A.X = 391.0
App.activeDocument().Note_A.Y = 285.0
App.activeDocument().Note_A.Scale = 3.0
App.activeDocument().Note_A.Text = str(unicode(self.lineEdit_10.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().Note_A)
if self.lineEdit_20.text() != "":
App.activeDocument().addObject('Drawing::FeatureViewAnnotation','CopyRight')
App.activeDocument().CopyRight.X = 221
App.activeDocument().CopyRight.Y = 286
App.activeDocument().CopyRight.Scale = 3.0
App.activeDocument().CopyRight.Text = str(unicode(self.lineEdit_20.text() , 'ISO-8859-1').encode('UTF-8'))
App.activeDocument().Page.addObject(App.activeDocument().CopyRight)
App.ActiveDocument.recompute()
def on_pushButton04_clicked(self): # Bouton nettoyer
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
except:
None
try:
App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
except:
None
DESIGNED_BY = "" ;self.lineEdit_01.setText("")
CREATION_DATE = "" ;self.lineEdit_02.setText("")
self.lineEdit_02h.setText("")
CHECKED_BY = "" ;self.lineEdit_03.setText("")
CHECK_DATE = "" ;self.lineEdit_04.setText("")
self.lineEdit_04h.setText("")
SIZE = "A3" ;self.lineEdit_05.setText("A3")
SCALE = "" ;self.lineEdit_06.setText("")
WEIGHT = "" ;self.lineEdit_07.setText("")
DRAWING_NUMBER = "" ;self.lineEdit_08.setText("")
SHEET = "" ;self.lineEdit_09.setText("")
TITLE = "" ;self.textEdit_01.setText("")
DESCRIPTION = "" ;self.textEdit_02.setText("")
self.lineEdit_10.setText("")
self.lineEdit_11.setText("")
self.lineEdit_12.setText("")
self.lineEdit_13.setText("")
self.lineEdit_14.setText("")
self.lineEdit_15.setText("")
self.lineEdit_16.setText("")
self.lineEdit_17.setText("")
self.lineEdit_18.setText("")
self.lineEdit_20.setText("")
def on_pushButton03_clicked(self): # Bouton Memo
self.lineEdit_01.setText(DESIGNED_BY)
self.lineEdit_02.setText(CREA_DATE)
self.lineEdit_02h.setText(CREA_TIME)
self.lineEdit_03.setText(CHECKED_BY)
self.lineEdit_04.setText(CHEC_DATE)
self.lineEdit_04h.setText(CHEC_TIME)
self.lineEdit_05.setText(SIZE)
self.lineEdit_06.setText(SCALE)
self.lineEdit_07.setText(WEIGHT)
self.lineEdit_08.setText(DRAWING_NUMBER)
self.lineEdit_09.setText(SHEET)
self.textEdit_01.setText(TITLE)
self.textEdit_02.setText(DESCRIPTION)
self.lineEdit_18.setText(lineEdit18)
self.lineEdit_17.setText(lineEdit17)
self.lineEdit_16.setText(lineEdit16)
self.lineEdit_15.setText(lineEdit15)
self.lineEdit_14.setText(lineEdit14)
self.lineEdit_13.setText(lineEdit13)
self.lineEdit_12.setText(lineEdit12)
self.lineEdit_11.setText(lineEdit11)
self.lineEdit_10.setText(lineEdit10)
self.lineEdit_20.setText(lineEdit20)
def on_pushButton02_clicked(self): # Bouton Quitter
App.Console.PrintMessage("Terminé\r\n")
self.window.hide()
# def on_pushButton01_clicked(self): # Bouton appel de Position
# MainWindow.resize(210, 480)
# executer()
# MainWindow.resize(810, 480)
#______________________________________________________________________________________
MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)
MainWindow.show()
Other
The fields have no length limit, check your cartouche.
This program creates a drawing representing the regional projection symbol on your project, do not touch it is registered therefore hidden form invisible.
If you want it to be cleared uncomment the commented lines and vice versa
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False
et
# App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False
(I had some times an error in execution when the symbol was erased)
This module works with the drawing sheet included in FreeCAD this sheet is called Page, do not change the name of this sheet!