Personnalisation de l'interface
Introduction
Puisque l'interface de FreeCAD est basée sur le très moderne toolkit Qt, elle dispose d'une organisation de pointe. Les widgets, menus, barres d'outils et autres outils peuvent être modifiés, déplacés, partagés entre ateliers ; des raccourcis-clavier peuvent être créés et modifiés, et des macros peuvent être enregistrées et jouées.
La boite de dialogue de personnalisation d'interface
Usage
La fenêtre de personnalisation est accessible depuis le menu Tools → Customize.
Options
In the Customize dialog box the following tabs are available:
Commands
File:Std DlgCustomize tab Commands.png
The Commands tab
On this tab you can browse the available commands.
Browse commands
- Select a command category in the Category panel on the left. Some categories match menu entries.
- The tools available in the selected category are shown in the panel on the right.
- Hover a command: its tooltip appears.
- Select a command: its status bar text is displayed below the two panels.
Keyboard
The Keyboard tab
On this tab custom keyboard shortcuts can be defined. Shortcuts for macro commands should be defined on the Macros tab.
Add a custom shortcut
- Select a command category from the Category dropdown list.
- Select a command from the Commands panel.
- The Current shortcut box displays the current short cut, if available.
- Enter a new shortcut in the Press new shortcut input box. Shortcuts can be up to 4 inputs long. Each input is either a single character, a combination of one or more special keys or a combination of one or more special keys and a character. Use Backspace to correct mistakes.
- If the shortcut is already in use, a dialog box will ask you if you want to override it, and the command the shortcut is assigned to will appear in the Currently assigned to panel.
- Press the Assign button to assign the new shortcut.
- Press the Clear button to remove the entered shortcut. This will also remove the content of the Current shortcut box. Note that default shortcuts are not permanently removed. They will be restored upon restarting FreeCAD.
Remove a custom shortcut
- Select a command category from the Category dropdown list.
- Select a command from the Commands panel.
- Press the Reset button.
Remove all custom shortcuts
- Press the Reset All button.
Notes (Keyboard)
- Shortcuts only work if their commands appear in the standard menu or in the menu of a workbench that has been loaded in the current FreeCAD session, or if their commands appear on a visible toolbar.
- In V0.19 there is an issue with some Draft commands. Their default shortcuts do not work and/or custom shortcuts cannot be assigned to them.
Workbenches
File:Std DlgCustomize tab Workbenches.png
The Workbenches tab
On this tab the Workbench selector list can be changed. The Enabled workbenches list shows the workbenches as they will appear in the Workbench selector.
Disable a workbench
- Select a workbench in the Enabled workbenches list.
- Press the button.
- The workbench will be moved to the Disabled workbenches list
Re-enable a workbench
- Select a workbench in the Disabled workbenches list.
- Press the button.
- The workbench will be moved to the Enabled workbenches list
Re-enable all workbenches
Change a workbench position
- Select a workbench in the Enabled workbenches list.
- Press the button or the button.
- Optionally repeat this until the workbench is in the correct position.
Sort workbenches alphabetically
Toolbars
The Toolbars tab
On this tab custom toolbars can be created and modified.
Select the workbench
- In the dropdown list on the right select the workbench whose custom toolbars you want to modify. The 'Global' option is there for custom toolbars that should be available in all workbenches.
Create a toolbar
- Press the New... button.
- Enter a name in the dialog box that opens.
- Press the OK button.
- The new toolbar will appear in the panel on the right.
Rename a toolbar
- Select a toolbar in the panel on the right.
- Press the Rename... button.
- Enter a new name in the dialog box that opens.
- Press the OK button.
Delete a toolbar
- Select a toolbar in the panel on the right.
- Press the Delete button.
Disable a toolbar
- Uncheck the checkbox in front of the toolbar name in the panel on the right.
- A disabled toolbar will be invisible in the FreeCAD interface.
Add a command
- Select the correct toolbar in the panel on the right. If no toolbar is selected, the command will be added to the first toolbar in the list.
- Select a category from the dropdown list on the left. Macro commands that have been set up on the Macros tab appear in the 'Macros' category.
- Select a command from the panel on the left.
- Or select '<Separator>' to add a separator (a line between two toolbar buttons).
- Press button.
Remove a command
Change a command position
- If required, expand the toolbar in the panel on the right.
- Select a command.
- Press the button or the button.
- Optionally repeat this until the command is in the correct position.
Notes (Toolbars)
- Toolbars belonging to the current workbench are updated immediately, but after disabling/re-enabling a toolbar a workbench change is required (switch to a different workbench and then switch back).
- To update 'Global' toolbars a workbench change (if commands have been added or removed) or a restart (if the order of a toolbar has changed or a toolbar was renamed) is required.
- In V0.19 there is an issue with some Draft commands. After adding them to a custom toolbar and exiting the FreeCAD application the user.cfg file must be manually edited for these commands. Search for the name of the custom toolbar and in that section change the content of the
FCText
items that start withgui_
toDraftTools
.
Macros
The Macros tab
On this tab user macro commands can be set up. Once set up, they can be added to custom toolbars. FreeCAD uses a dedicated folder for user macros and only macros in that folder can be set up. Use the Std DlgMacroExecute command to find this folder on your system.
If you download a macro with the Addon Manager then make sure that you also download its icon image file. Most macros have an image link on the information page that appears in the Addon Manager. You can for example put this image file in the user macros folder.
Add a macro command
- In the Macro dropdown list select a macro.
- Enter a Menu text. This will be the name used to identify the macro command and will also appear in the toolbar if there is no icon.
- Optionally enter a Tool tip. This text will appear near the location of the mouse when you hover the toolbar icon.
- Optionally enter a Status text. This text will appear in the status bar when you hover the toolbar icon.
- Optionally enter the wiki page for the macro, if available, in the What's this input box. Just enter the page name, not the full URL.
- Optionally enter a shortcut in the Accelerator input box. See Keyboard for more information.
- To add an icon:
- Press the Pixmap ... button.
- The Choose Icon dialog box opens.
- If required Press the Icon folders... button to add an icon folder.
- Select an icon from the panel. The Choose Icon dialog box closes automatically.
- Press the Add button.
- The macro command appears in the panel on the left.
- The macro command can now be selected on the Toolbars tab.
Remove a macro command
- Select the macro command in the panel on the left.
- Press the Remove button.
Change a macro command
- Double-click the macro command in the panel on the left.
- Make the required changes. Note that you cannot remove the icon, you can only replace it.
- Press the Replace button.
Spaceball Motion
This is tab is blank if no Spaceball is detected. See: 3Dconnexion input devices.
Spaceball Buttons
This is tab is blank if no Spaceball is detected. See: 3Dconnexion input devices.
Addons
Il existe d'autres façons de personnaliser l'interface FreeCAD en utilisant son référentiel modulaire robuste via le Std Addon manager (gestionnaire d'extensions). Il existe plusieurs Addons qui permettent d'améliorer l'interface utilisateur/expérience utilisateur. Voici quelques options créées par les utilisateurs de la communauté FreeCAD.
Menu en cube
- Dépôt Github: https://github.com/triplus/CubeMenu
Transparence
Thèmes des icônes
- Dépôt Github: https://github.com/triplus/IconThemes
- Dépôt Github:
Lanceur
- Dépôt Github: https://github.com/triplus/Launcher
- Github repository: https://github.com/triplus/PieMenu
RemBench
- Dépôt Github: https://github.com/triplus/RemBench
Raccourci
- Dépôt Github: https://github.com/triplus/ShortCuts
- Fichier : Nouveau, Ouvrir, Fermer, Fermer tout, Enregistrer, Enregistrer sous, Enregistrer une copie, Enregistrer tout, Rétablir, Importer, Exporter, Fusion de projets, Informations sur le projet, Imprimer, Aperçu avant impression, Exporter au format PDF, Fichiers récents, Quitter
- Édition : Annuler, Rétablir, Couper, Copier, Coller, Dupliquer la sélection, Rafraîchir, Sélection par boîte, Sélection d'éléments par boîte, Tout sélectionner, Effacer, Vers la console Python, Positionner, Transformer, Aligner, Basculer le mode d'édition, Mode d'édition, Préférences
- Affichage :
- Divers : Créer une nouvelle vue, Vue orthographique, Vue en perspective, Plein écran, Boîte englobante, Axes du repère, Plan de coupe, Mappage de texture, Basculer en mode navigation, Apparence, Couleur aléatoire, Atelier, Barre d'état
- Vues standards : Tout afficher, Afficher la sélection, Isométrique, Dimétrique, Trimétrique, Accueil, Vue de devant, Vue de dessus, Vue de droite, Vue de l'arrière, Vue de dessous, Vue de gauche, Rotation à gauche, Rotation à droite
- Figer l'affichage : Enregistrer les vues, Charger les vues, Figer l'affichage, Effacer les vues
- Style de représentation : Par défaut, Points, Filaire, Ligne cachée, Pas d'ombrage, Ombré, Filaire ombré
- Stéréo : Stéréo rouge/cyan, Tampon stéréo quadruple, Lignes stéréo entrelacées, Colonnes stéréo entrelacées, Stéréo désactivée, Position de la caméra
- Zoom : Zoom avant, Zoom arrière, Zoom fenêtre
- Fenêtre de document : Dockée, Non dockée, Plein écran
- Visibilité : Basculer la visibilité, Afficher la sélection, Masquer la sélection, Sélectionner les objets visibles, Basculer tous les objets, Afficher tous les objets, Masquer tous les objets, Basculer la sélectivité, Basculer les mesures, Supprimer les mesures
- Barre d'outils : Fichier, Édition, Presse-papiers, Atelier, Macro, Vue, Structure, Aide
- Panneaux : Vue en arborescence, Éditeur de propriétés, Fenêtre de sélection, Panneau des tâches, Console Python, Vue DAG, Vue combinée, Vue rapport
- Navigation par lien : Objet lié, Objet lié le plus profond, Tous les liens
- Actions sur l'arborescence : Synchroniser la vue, Synchroniser la sélection, Synchroniser le placement, Présélection, Enregistrer la sélection, Document unique, Tous les documents, Réduire/développer, Déplacement, Aller à la sélection, Sélection précédente, Sélection suivante
- Outils : Éditeur des paramètres, Capture d'écran, Inspecteur du graphe de scène, Graphique de dépendance, Utilitaire de projet, Mesurer une distance, Ajouter un document texte, Vue en rotation, Convertisseur d'unités, Personnaliser, Gestionnaire des extensions
- Macro : Enregistrer une macro, Macros…, Macros récentes, Lancer la macro, Débogueur distant, Déboguer la macro, Arrêt du débogage, Passer outre, Rentrer dedans, Basculer le point d'arrêt
- Aide : Aide en ligne, Site web de FreeCAD, Documentation utilisateurs, Documentation pour programmer en Python, Documentation automatique des modules Python, Forum de FreeCAD, FAQ de FreeCAD, Signaler un bogue, À propos de FreeCAD, Qu'est-ce que c'est ?
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test