Inspection Workbench

From FreeCAD Documentation
Revision as of 16:53, 20 October 2015 by R-Frank (talk | contribs)

The Inspection Workbench is made to give you specific tools for examination of shapes.
It is still in development.

Intended Workflow:
Visual Inspection can be done via the pull-down-menu in the top row.
Select two shapes to be compared and select Inspection > Visual Inspection from the menu.
The shapes should intersect as much as possible.
You will get a colored image showing the deviation between the two shapes.

Alternatively you could also use the macro HighlightDifference to compare two shapes.