Image Workbench/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 1: Line 1:
<languages/>
<languages/>
<div class="mw-translate-fuzzy">
Il modulo '''Immagine''' gestisce diversi tipi di [http://en.wikipedia.org/wiki/Raster_graphics immagini bitmap], e permette di aprirle in FreeCAD.<br /> Attualmente, il modulo consente di aprire file di formato .bmp, .jpg, .png e .xpm in una finestra di visualizzazione separata.
Il modulo '''Immagine''' gestisce diversi tipi di [http://en.wikipedia.org/wiki/Raster_graphics immagini bitmap], e permette di aprirle in FreeCAD.<br /> Attualmente, il modulo consente di aprire file di formato .bmp, .jpg, .png e .xpm in una finestra di visualizzazione separata.
</div>


Currently, the module lets you open .bmp, .jpg, .png and .xpm file formats in a separate viewer window.
Il modulo '''Immagine''' consente inoltre di aprire una immagine su un piano nello spazio 3D di FreeCAD. Questa funzione è disponibile tramite il secondo pulsante dell'ambiente immagine. [[File:Image_Import.png|32px]]
<br />
L'immagine importata può essere unita come schizzo a uno dei tre piani principali (XY/XZ/YZ) con offset positivo o negativo.
<br />
Questa funzione è disponibile solo se è stato aperto un documento di FreeCAD.


== Features ==
L'immagine può essere spostata nello spazio 3D modificando il suo posizionamento nell'editor delle [[Property editor/it|Proprietà]].
<br />
Principalmente serve per costruire il tracciato di una nuova parte usando l'immagine come modello.


* The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with [[Image_Import|Image Import]], the second button of the image workbench.
L'immagine viene importata con 1 pixel = 1mm.
* The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negative offset.
Pertanto si raccomanda di importare una immagine che abbia una risoluzione ragionevole.
* This function is only available if you have opened a FreeCAD document.
L'immagine può essere scalata modificando i valori "XSize" e "YSize" nella scheda delle [[Property editor/it|Proprietà]].
* The image can be moved in 3D-space by editing the placement in the [[Property editor|Property editor]].
L'immagine può essere spostata anche modificando i valori di Y/Z/X nella scheda Placement.
* The major use is tracing over the image, in order to generate a new part while using the image as a template.
L'immagine può essere ruotata attorno ad un asse utilizzando il dialogo di posizionamento.
* The image is imported with 1 pixel = 1mm.
* The recommendation is to have the imported image at a reasonable resolution.
* The image can be scaled by editing the "XSize" and "YSize" values in the [[Property editor|Property editor]].
* The image can be moved by editing the X/Y/Z-values in the [[Property editor|Property editor]].
* The image can be rotated around any axis by using the [[Property editor|Property editor]].


'''Suggerimento:'''<br />
'''Suggerimento:'''<br />

Revision as of 09:42, 26 September 2018

Il modulo Immagine gestisce diversi tipi di immagini bitmap, e permette di aprirle in FreeCAD.
Attualmente, il modulo consente di aprire file di formato .bmp, .jpg, .png e .xpm in una finestra di visualizzazione separata.

Currently, the module lets you open .bmp, .jpg, .png and .xpm file formats in a separate viewer window.

Features

  • The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with Image Import, the second button of the image workbench.
  • The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negative offset.
  • This function is only available if you have opened a FreeCAD document.
  • The image can be moved in 3D-space by editing the placement in the Property editor.
  • The major use is tracing over the image, in order to generate a new part while using the image as a template.
  • The image is imported with 1 pixel = 1mm.
 * The recommendation is to have the imported image at a reasonable resolution.
  • The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.
  • The image can be moved by editing the X/Y/Z-values in the Property editor.
  • The image can be rotated around any axis by using the Property editor.

Suggerimento:
La tracciatura di elementi di sketch su un'immagine funziona meglio se l'immagine ha un piccolo offset negativo rispetto al piano dello schizzo, ovvero se l'immagine è posizionata leggermente dietro al piano dello schizzo .
È possibile impostare un offset di -0,1 mm in fase di importazione oppure successivamente, modificando la posizione dell'immagine.

Strumenti

Importa immagine