Инструметы сборки FreeCAD
Инструмент сборки FreeCAD или fcbt это python сценарий расположеный в
trunc/src/Tools/fcbt.py
Он может быть использован для упрощения некоторых часто встречающихся задач при сборке, распространении и расширении FreeCAD.
Использование
В корректно установленом Python интепретаторе , может быть вызвана команда fcbt
python fbct.py
Она отобразит меню, в котором вы можете выбрать задачу которую необходимо использовать для:
FreeCAD Build Tool Usage: fcbt <command name> [command parameter] possible commands are: - DistSrc (DS) Build a source Distr. of the current source tree - DistBin (DB) Build a binary Distr. of the current source tree - DistSetup (DI) Build a Setup Distr. of the current source tree - DistSetup (DUI) Build a User Setup Distr. of the current source tree - DistAll (DA) Run all three above modules - NextBuildNumber (NBN) Increase the Build Number of this Version - CreateModule (CM) Insert a new FreeCAD Module in the module directory For help on the modules type: fcbt <command name> ?
В ответ на запрос, введите абревеатуру той команды которую вы хотите вызвать. Например введите "CM" для создания модуля.
DistSrc
The command "DS" creates a source distribution of the current source tree.
DistBin
The command "DB" creates a binary distribution of the current source tree.
DistSetup
The command "DI" creates a setup distribution of the current source tree.
DistSetup
The command "DUI" creates a user setup distribution of the current source tree.
DistAll
The command "DA" executes "DS", "DB" and "DI" in sequence.
NextBuildNumber
The "NBN" command increments the build number to create a new release version of FreeCAD.
CreateModule
The "CM" command creates a new application module.