Strumento di compilazione di FreeCAD
Lo Strumento per la costruzione di FreeCAD (FreeCAD build tool o fcbt) è uno script in Python ubicato in
trunc/src/Tools/fcbt.py
Può essere usato per semplificare alcune frequenti operazioni nella costruzione, distribuzione e estensione di FreeCAD.
Utilizzo
Con Python installato correttamente, fcbt può essere richiamato con il comando
python fbct.py
che visualizza un menu, in cui è possibile selezionare l'operazione che si desidera utilizzare per:
FreeCAD Build Tool Usage: fcbt <command name> [command parameter] possible commands are: - DistSrc (DS) Build a source Distr. of the current source tree - DistBin (DB) Build a binary Distr. of the current source tree - DistSetup (DI) Build a Setup Distr. of the current source tree - DistSetup (DUI) Build a User Setup Distr. of the current source tree - DistAll (DA) Run all three above modules - NextBuildNumber (NBN) Increase the Build Number of this Version - CreateModule (CM) Insert a new FreeCAD Module in the module directory For help on the modules type: fcbt <command name> ?
Al prompt inserire il comando abbreviato che si desidera utilizzare. Ad esempio digitare "CM" per creare un modulo.
DistSrc
Il comando "DS" crea una distribuzione di codice sorgente dell'albero di codice sorgente attuale.
DistBin
Il comando "DB" crea una distribuzione binaria dell'albero di codice sorgente attuale.
DistSetup
Il comando "DI" crea una distribuzione di setup dell'albero di codice sorgente attuale.
DistSetup
The command "DUI" creates a user setup distribution of the current source tree.
DistAll
The command "DA" executes "DS", "DB" and "DI" in sequence.
NextBuildNumber
The "NBN" command increments the build number to create a new release version of FreeCAD.
CreateModule
The "CM" command creates a new application module.