FEM FrontISTR Workbench
Introduction
The FEM FrontISTR Workbench is a FreeCAD addon that enables FrontISTR, an open-source large-scale parallel FEM program for nonlinear structural analysis.
Intended work-flow
- Set up an analysis model by FEM module (in the same way as calculiX).
- Switch to the workbench FrontISTR and create a FrontISTR solver object by clicking on the toolbar button .
- Open the task panel of SolverFISTRTools and set working directory.
- Click "Write input file"
- Click "Run FrontISTR"
- Check FISTR_Results for post processing.
Features
- static analysis, element check
- geometrical linear|nonlinear analysis
- elements: 1st/2nd order tetrahedron
- loads: mechanical concentrated and distributed loads, gravity
- boundary: points fixed or displacement
- step control: auto time increment and cutback
- linear equation solver
- iterative
- preconditioner: AMG, SSOR, Diagonal, ILU(k)(k=0,1,2)
- method: CG, BiCGSTAB, GMRES, GPBiCG
- direct: MUMPS
- iterative
- output file format: AVS, VTK(paraview required)
Features to be supported in the future
- analysis: thermal transfer, dynamic, eigen, frequency
- materials(mechanical): elastoplastic, hyper elastic, creep, visco elastic
- contact
- MPC(TIE)
- elements: prism, hexa, beam, shell, truss etc.
Limitations
- FISTR_Results only contains results for surfaces. If you need the interior results, change Output File Format to VTK and visualize the results with paraview.
Benchmark results
See https://github.com/FrontISTR/FEM_FrontISTR/tree/master/sample/benchmarks.
Installation
Addon Manager
FEM_FrontISTR can easily be installed via the FreeCAD Addon Manager from the Tools → Addon manager menu. FEM_FrontISTR is under active development and will get new features frequently. Therefore you should update it regularly using also the menu Tools → Addon manager. The FEM_FrontISTR code is hosted and developed on GitHub.
Manual
See How to install additional workbenches
Prerequisites
- FreeCAD v0.19+
- Paraview (optional)
FrontISTR Solver Installation
FrontISTR binaries will be automatically downloaded and installed on the first run. If the download does not proceed, please follow the steps below to install the solver.
Windows
- Download FrontISTR-latest.zip
- Create directory FEM_FrontISTR/bin
- Extract FrontISTR-latest.zip and put all files in FEM_FrontISTR/bin directory.
Linux
Under preparation.
Mac
Under preparation.
Tools
- Solver FrontISTR Standard: Creates a new FrontISTR solver for this analysis.
References
- Author: kinagaki rigarashi
- Source code: Github.com
- FreeCAD Forum: 58019
- Tutorials: https://frontistr-commons.gitlab.io/FEM_FrontISTR/en/
- FrontISTR solver documentation: https://manual.frontistr.com/en/
- Report bugs: Please report bugs at Github.com