FEM ElementFluid1D/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 28: Line 28:
==Использование==
==Использование==


# There are several ways to invoke the command:
# Click on [[Image:FEM_ElementFluid1D.svg|32px]] or choose {{KEY|Model}} {{KEY|[[Image:FEM_ElementFluid1D.svg|32px]] Fluid section for 1D flow}} from the top menu.
#* Press the {{Button|[[Image:FEM_ElementFluid1D.svg|16px]] [[FEM_ElementFluid1D|FEM ElementFluid1D]]}} button.
#* Select the {{MenuCommand|Model → Element Geometry → [[Image:FEM_ElementFluid1D.svg|16px]] Fluid section for 1D flow}} option from the menu.
# Select Fluid type: Liquid, Gas or Open Channel
# Select Fluid type: Liquid, Gas or Open Channel
# Select Section type: Pipe Manning, Pipe Inlet etc.
# Select Section type: Pipe Manning, Pipe Inlet etc.
Line 40: Line 42:
==Примечания==
==Примечания==


#An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
# An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
# The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html
# The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html



<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">

Revision as of 14:27, 25 February 2021

FEM ElementFluid1D

Системное название
FEM ElementFluid1D
Расположение в меню
Model → Fluid section for 1D flow
Верстаки
FEM
Быстрые клавиши
Нет
Представлено в версии
-
См. также
FEM tutorial

Описание

Создает элемент жидкостной секции МКЭ для пневматических и гидравлических сетей.

Использование

  1. There are several ways to invoke the command:
    • Press the FEM ElementFluid1D button.
    • Select the Model → Element Geometry → Fluid section for 1D flow option from the menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Ограничения

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Примечания

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html