FEM ConstraintTransform/ru

From FreeCAD Documentation
Revision as of 09:32, 16 November 2023 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Other languages:

FEM ConstraintTransform

Системное название
FEM ConstraintTransform
Расположение в меню
Model → Geometrical constraints → Constraint transform
Верстаки
FEM
Быстрые клавиши
Нет
Представлено в версии
-
См. также
FEM Constraint plane rotation

Описание

Transforms the coordinate system of a face to a particular coordinate system - rectangular or cylindrical.

Применение

  1. Apply the Displacement boundary condition to a face first.
  2. There are several ways to invoke the command:
    • Press the Local coordinate system button.
    • Select the Model → Geometrical analysis features → Local coordinate system option from the menu.
  3. Select rectangular or cylindrical transform. The former can be applied to any face, the latter is available only for the cylindrical faces.
  4. Select a face to which the displacement boundary condition was previously applied. Press the Add button.
  5. For rectangular transform, specify a rotation about each of the three axes.

Limitations

  • Cylindrical transform can be applied only to cylindrical faces.

Notes

  • This feature can be used to simulate torsion but only for cylindrical bars or parts containing such bars used to transmit torque.
  • The feature uses the *TRANSFORM card in CalculiX.