FEM ConstraintTransform/ru

From FreeCAD Documentation
Revision as of 11:08, 11 March 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Other languages:

FEM ConstraintTransform

Системное название
FEM ConstraintTransform
Расположение в меню
Model → Geometrical constraints → Constraint transform
Верстаки
FEM
Быстрые клавиши
Нет
Представлено в версии
-
См. также
FEM Constraint plane rotation

Описание

Transforms the coordinate system of a face to a particular coordinate system - rectangular or cylindrical.

Использование

  1. Apply the Constraint displacement to a face first.
  2. There are several ways to invoke the command:
    • Press the FEM ConstraintTransform button.
    • Select the Model → Geometrical Constraints → Constraint transform option from the menu.
  3. Select rectangular or cylindrical transform. The former can be applied to any face, the latter is available only for the cylindrical faces.
  4. Select a face to which the displacement constraint was previously applied. Press the Add button.
  5. For rectangular transform, specify a rotation about each of the three axes.

Limitations

  • Cylindrical transform can be applied only to cylindrical faces.

Notes

  • This constraint can be used to simulate torsion but only for cylindrical bars or parts containing such bars used to transmit torque.
  • The constraint uses the *TRANSFORM card in CalculiX.