FEM ConstraintPressure/ro: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 4: Line 4:
|[[FEM_ConstraintForce|Constraint force]]
|[[FEM_ConstraintForce|Constraint force]]
|[[FEM_ConstraintSelfWeight|Constraint self weight]]
|[[FEM_ConstraintSelfWeight|Constraint self weight]]
|[[FEM_Module|FEM]]
|[[FEM_Workbench|FEM]]
|IconL=FEM_ConstraintForce.svg
|IconL=FEM_ConstraintForce.svg
|IconR=FEM_ConstraintSelfWeight.svg
|IconR=FEM_ConstraintSelfWeight.svg
Line 41: Line 41:
|[[FEM_ConstraintForce|Constraint force]]
|[[FEM_ConstraintForce|Constraint force]]
|[[FEM_ConstraintSelfWeight|Constraint self weight]]
|[[FEM_ConstraintSelfWeight|Constraint self weight]]
|[[FEM_Module|FEM]]
|[[FEM_Workbench|FEM]]
|IconL=FEM_ConstraintForce.svg
|IconL=FEM_ConstraintForce.svg
|IconR=FEM_ConstraintSelfWeight.svg
|IconR=FEM_ConstraintSelfWeight.svg

Revision as of 18:27, 21 August 2021

FEM ConstraintPressure

poziția meniului
Model → Mechanical Constraints → Constraint pressure
Ateliere
FEM
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
FEM tutorial

Descriere

Aplică o constrângere de presiune pe o fațetă.

Cum se folosește

  1. Click pe sau alegeți ModelMechanical Constraints Constraint pressure din mediul de sus.
  2. Click on Add reference și selectați fațeta în vedere 3D
  3. Editați fereastra corespunzătoare pentru a specifica presiunea în MPa
  4. Bifați caseta pentru a inversa direcția, dacă este necesar.

Note

Distribuția presiunii este întotdeauna uniformă și întotdeauna perpendiculară pe față.