FEM RandbedingungMagnetisierung

From FreeCAD Documentation
Revision as of 22:59, 16 December 2023 by FBXL5 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Other languages:

FEM RandbedingungMagnetisierung

Menüeintrag
Modell → Elektromagnetische Randbedingungen → Randbedingung Magnetisierung
Arbeitsbereich
FEM
Standardtastenkürzel
Keiner
Eingeführt in Version
0.21
Siehe auch
MagnetodynamischeGleichung, Magnetodynamische2DGleichung

Beschreibung

Erstellt eine FEM-Randbedingung für die Magnetisierung, zur Verwendung mit der magnetodynamischen Gleichung und der magnetodynamischen 2D-Gleichung.

Anwendung

  1. Die Schaltfläche Randbedingung Magnetisierung drücken oder den Menüeintrag Modell → Elektromagnetische Randbedingungen → Randbedingung Magnetisierung auswählen.
  2. In der 3D-Ansicht das Objekt auswählen, dem die Randbedingung zugeordnet werden soll.
  3. Die Schaltfläche Hinzufügen drücken.

Optionen

  • Magnetization_*_1: The real/imaginary part of the magnetization in x-direction in A/m.
    For other coordinate systems than Cartesian 3D, this will be the first coordinate of the system instead of x.
  • Magnetization_*_2: The real/imaginary part of the magnetization in y-direction in A/m.
    For other coordinate systems than Cartesian 3D, this will be the second coordinate of the system instead of y.
  • Magnetization_*_3: The real/imaginary part of the magnetization in z-direction in A/m.
    For other coordinate systems than Cartesian 3D, this will be the third coordinate of the system instead of z. If the coordinate system has no third coordinate, this setting will be ignored.
  • Magnetization_*_*_Disabled: Whether the corresponding parameter is disabled (assumed as unknown by the solver).