External workbenches/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{VeryImportantMessage|In FreeCAD 0.17 Drawing è stato sostituito da TechDraw. Sebbene entrambi gli ambienti siano inclusi...")
(Updating to match new version of source page)
Line 1: Line 1:
<languages/>
<languages/>
<div class="mw-translate-fuzzy">
Alcuni utenti esperti hanno esteso FreeCAD con vari ambienti aggiuntivi personalizzati, che non sono ancora integrati nel codice sorgente FreeCAD, ma che sono facili da aggiungere a un'installazione FreeCAD esistente. Le istruzioni sono disponibili nelle pagine indicate in seguito:
Alcuni utenti esperti hanno esteso FreeCAD con vari ambienti aggiuntivi personalizzati, che non sono ancora integrati nel codice sorgente FreeCAD, ma che sono facili da aggiungere a un'installazione FreeCAD esistente. Le istruzioni sono disponibili nelle pagine indicate in seguito:
</div>


Most extensions can be installed from the [[Addon Manager]], menu {{MenuCommand|Tools → Addon manager}}; specific instructions are provided in each extension page.

<div class="mw-translate-fuzzy">
;[[BIM Workbench/it|BIM]]
;[[BIM Workbench/it|BIM]]
: mira a implementare gli strumenti e il flusso di lavoro per [https://en.wikipedia.org/wiki/Building_information_modeling Building Information Modeling] (BIM) in FreeCAD.
: mira a implementare gli strumenti e il flusso di lavoro per [https://en.wikipedia.org/wiki/Building_information_modeling Building Information Modeling] (BIM) in FreeCAD.
Line 20: Line 25:
;[[WebTools Workbench/it|WebTools]]
;[[WebTools Workbench/it|WebTools]]
: contiene una serie di strumenti per comunicare con i servizi Web dall'interno di FreeCAD.
: contiene una serie di strumenti per comunicare con i servizi Web dall'interno di FreeCAD.
</div>


=== General ===
;[[BIM Workbench|BIM]]
: aims to implement complete [https://en.wikipedia.org/wiki/Building_information_modeling Building Information Modeling] (BIM) tools and workflow in FreeCAD. It builds on top of the Arch Workbench
;[[Defeaturing Workbench|Defeaturing]]
: provides tools to edit STEP models by removing selected features.
;[[DynamicData Workbench|DynamicData]]
: allows creation of container objects for holding custom properties.
;[[EM_Workbench|EM Workbench]]
: ElectroMagnetic Workbench for [http://www.fastfieldsolvers.com FastFieldSolvers] free tools.
;[[Flamingo Workbench|Flamingo]]
: a set of customized FreeCAD commands and objects that help to speed-up the drawing of frames and pipelines.
;[[KicadStepUp_Workbench|Kicad StepUp]]
: is aimed at helping both KiCad and FreeCAD users in collaborating with electrical (ECAD) and mechanical (MCAD) design.
;[[Reinforcement Addon|Reinforcement]]
: augments the [[Arch Workbench]] with additional rebar tools.
;[[SheetMetal Workbench|SheetMetal]]
: provides tools to design and unfold sheet metal parts.
;[[WebTools Workbench|WebTools]]
: contains a series of tools to communicate with Web services from within FreeCAD.

=== Assembly ===
As of FreeCAD 0.18 there is no official assembly workbench. However, several external tools have been created to manipulate objects to produce assemblies.

;[[Assembly2 Workbench|Assembly2]]
: provides tools to create multi-part assemblies.
;[[Manipulator Workbench|Manipulator]]
: is aimed to help FreeCAD users in aligning, moving, rotating and measuring 3D objects through a friendly GUI.
;[[Macro WorkFeatures|WorkFeatures]]
: adds a wide range of helper objects such as alignment planes or axes, and tools to help you to position and align objects along those helper objects.

== Deprecated extensions ==
;[[Drawing Dimensioning Addon|Drawing Dimensioning]]
: adds powerful dimensioning and annotation tools to the [[Drawing Workbench]].

<div class="mw-translate-fuzzy">
TODO:
TODO:
* Bolts
* Bolts
Line 36: Line 77:
* Retr3D
* Retr3D
* Timber
* Timber
</div>


{{VeryImportantMessage|(November 2018) These extensions lack documentation in this wiki. If you are the developer or a user of these addons, consider creating a page for them, or providing a link to their documentation}}
== Assembly2 ==
* A2plus

* Assembly3
Il [https://github.com/hamish2014/FreeCAD_assembly2 modulo Assembly 2] fornisce strumenti per creare assemblaggi di più parti, ed è una buona alternativa all'ambiente di Assemblaggio ufficiale, che è ancora in fase di sviluppo (vedere [http://forum.freecadweb.org/viewtopic.php?f=10&t=8577 forum thread]).
* Bolts

* [https://github.com/qingfengxia/Cfd Cfd]
[[Image:Assembly2_example.jpg]]
* EaglePCB_2_FreeCAD

* Gears
== Drawing Dimensioning ==
* FreeCAD-CuraEngine

* Animation
{{VeryImportantMessage|In FreeCAD 0.17 [[Drawing Workbench/it|Drawing]] è stato sostituito da [[TechDraw Workbench/it|TechDraw]]. Sebbene entrambi gli ambienti siano inclusi in v0.17, Drawing non viene più gestito e potrebbe essere rimosso nelle future versioni di FreeCAD. Si consiglia quindi agli utenti di passare a [[TechDraw Workbench/it|TechDraw]] che include anche gli strumenti di quotatura e annotazione.}}
* Lattice2

* Exploded Animation
Il [https://github.com/hamish2014/FreeCAD_drawing_dimensioning modulo Drawing dimensioning] aggiunge potenti strumenti per la quotatura e le annotazioni all'ambiente [[Drawing Workbench/it|Disegno]] (vedere [http://forum.freecadweb.org/viewtopic.php?f=10&t=8395 forum thread]).
* Fasteners

* GeoData
[[Image:Drawing_Dimensioning_example.jpg]]
* Nurbs
* Persistent toolbars
* Retr3D
* Timber


<div class="mw-translate-fuzzy">
[[Category:Documentation/it]]
[[Category:Documentation/it]]
[[Category:Addons/it]]
[[Category:Addons/it]]
</div>

Revision as of 12:31, 29 January 2019

Alcuni utenti esperti hanno esteso FreeCAD con vari ambienti aggiuntivi personalizzati, che non sono ancora integrati nel codice sorgente FreeCAD, ma che sono facili da aggiungere a un'installazione FreeCAD esistente. Le istruzioni sono disponibili nelle pagine indicate in seguito:

Most extensions can be installed from the Addon Manager, menu Tools → Addon manager; specific instructions are provided in each extension page.

BIM
mira a implementare gli strumenti e il flusso di lavoro per Building Information Modeling (BIM) in FreeCAD.
Defeaturing
fornisce gli strumenti per modificare i modelli STEP rimuovendo le funzioni selezionate.
DynamicData
consente di creare degli oggetti contenitore per contenere delle proprietà personalizzate.
Flamingo
una serie di comandi e oggetti FreeCAD personalizzati che consentono di velocizzare il disegno di strutture e tubazioni.
Kicad StepUp
ha lo scopo di aiutare gli utenti di KiCad e FreeCAD a collaborare nel design elettrico (ECAD) e meccanico (MCAD).
WorkFeatures
aggiunge una vasta gamma di oggetti di supporto come piani di allineamento o assi e degli strumenti di aiuto nel posizionare e allineare gli oggetti lungo questi oggetti di supporto.
Manipulator
ha lo scopo di aiutare gli utenti di FreeCAD ad allineare, spostare, ruotare e misurare gli oggetti 3D attraverso una GUI amichevole.
SheetMetal
fornisce strumenti per progettare e dispiegare parti in lamiera.
WebTools
contiene una serie di strumenti per comunicare con i servizi Web dall'interno di FreeCAD.

General

BIM
aims to implement complete Building Information Modeling (BIM) tools and workflow in FreeCAD. It builds on top of the Arch Workbench
Defeaturing
provides tools to edit STEP models by removing selected features.
DynamicData
allows creation of container objects for holding custom properties.
EM Workbench
ElectroMagnetic Workbench for FastFieldSolvers free tools.
Flamingo
a set of customized FreeCAD commands and objects that help to speed-up the drawing of frames and pipelines.
Kicad StepUp
is aimed at helping both KiCad and FreeCAD users in collaborating with electrical (ECAD) and mechanical (MCAD) design.
Reinforcement
augments the Arch Workbench with additional rebar tools.
SheetMetal
provides tools to design and unfold sheet metal parts.
WebTools
contains a series of tools to communicate with Web services from within FreeCAD.

Assembly

As of FreeCAD 0.18 there is no official assembly workbench. However, several external tools have been created to manipulate objects to produce assemblies.

Assembly2
provides tools to create multi-part assemblies.
Manipulator
is aimed to help FreeCAD users in aligning, moving, rotating and measuring 3D objects through a friendly GUI.
WorkFeatures
adds a wide range of helper objects such as alignment planes or axes, and tools to help you to position and align objects along those helper objects.

Deprecated extensions

Drawing Dimensioning
adds powerful dimensioning and annotation tools to the Drawing Workbench.

TODO:

  • Bolts
  • Cfd
  • EaglePCB_2_FreeCAD
  • Gears
  • FreeCAD-CuraEngine
  • Animation
  • Lattice2
  • Exploded Animation
  • Fasteners
  • GeoData
  • Nurbs
  • Persistent toolbars
  • Retr3D
  • Timber
(November 2018) These extensions lack documentation in this wiki. If you are the developer or a user of these addons, consider creating a page for them, or providing a link to their documentation
  • A2plus
  • Assembly3
  • Bolts
  • Cfd
  • EaglePCB_2_FreeCAD
  • Gears
  • FreeCAD-CuraEngine
  • Animation
  • Lattice2
  • Exploded Animation
  • Fasteners
  • GeoData
  • Nurbs
  • Persistent toolbars
  • Retr3D
  • Timber