Taslak Tezgahı
Introduction
Giriş
Taslak Tezgahı, basit 2D nesneler çizmenize izin verir ve daha sonra bunları değiştirmek için birkaç araç sunar. Ayrıca, geometrinizin konumunu tam olarak kontrol etmek için bir çalışma düzlemi, bir ızgara ve bir bağlama sistemi tanımlamak için araçlar sağlar.
Oluşturulan 2D nesneler genel çizim için Inkscape veya Autocad'e benzer bir şekilde kullanılabilir. Bu 2D şekiller ayrıca diğer tezgahlarla oluşturulan 3D nesnelerin temel bileşenleri olarak da kullanılabilir, örneğin, Parça tezgahı ve Mimari tezgah gibi. Taslak nesnelerin Eskiz tezgahı 'na dönüştürülmesi de mümkündür; bu, şekillerden katı cisimlerin oluşturulması için Parça tasarım tezgahı ile de kullanılabileceği anlamına gelir.
FreeCAD öncelikle bir 3D modelleme uygulamasıdır ve bu nedenle 2D araçları diğer çizim programlarındaki kadar gelişmiş değildir. Öncelikli hedefiniz karmaşık 2D çizimler ve DXF dosyalarının üretimi ise ve 3D modellemeye gerek duymuyorsanız, teknik taslaklar için LibreCAD, QCad,TurboCad ve diğerleri gibi özel bir yazılım programı düşünebilirsiniz.
Çizim nesneleri
Bunlar nesne oluşturma araçlarıdır.
- Çizgi: İki nokta arasında çizgi parçası çizer.
- Tel: Birden çok çizgi parçasından (bir çizgi) oluşan bir çizgi çizer.
- Çember: Merkez noktası ve yarıçapla bir çember çizer.
- Yay: Merkez, yarıçap, başlangıç açısı ve bitiş açısından bir yay parçası çizer.
- Elips: İki köşe noktasından bir elips çizer.
- Çokgen:Merkezden, yarıçaptan ve yanlardan düzenli bir çokgen çizer.
- Dikdörtgen: İki köşe noktasından bir dikdörtgen çizer.
- Metin: Çok satırlı bir metin notu çizer.
- Boyut: Bir boyut notu çizer.
- BSpline: Bir nokta serisinden bir B-Spline çizer.
- Nokta: Bir nokta nesnesi ekler.
- Şekil dizesi: Belirli bir noktada bir metin dizesini temsil eden bir bileşik şekil ekler.
- Yüz kaplama: Mevcut nesnelerdeki seçilen yüzlerden yeni bir nesne oluşturur.
- Bezier eğrisi: Bir dizi noktadan bir Bezier eğrisi çizer.
- Etiket: Seçili öğeye işaret eden oklu bir etiket yerleştirir. 0.17 sürümünde kullanılabilir
Annotation objects
- Text: draws a multi-line text annotation.
- Dimension: draws a dimension annotation.
- Label: places a label with an arrow pointing to a selected element. introduced in version 0.17
- Annotation style editor: opens an editor to change the annotation style of these objects. introduced in version 0.19
Nesneleri modifiye etme
Bunlar mevcut nesneleri modifiye etmek için kullanılan araçlardır. Seçilen nesneler üzerinde çalışırlar, ancak hiçbir nesne seçilmezse, birini seçmeniz istenir.
Birçok işlem aracı (taşıma, döndürme, dizi vb.) katı nesneler üzerinde de çalışır ( Parça tezgahı, Parça tasarım tezgahı, Mimari tezgah, vb.).
- Taşı: Nesneleri bir konumdan diğerine taşır.
- Döndür: Nesneleri başlangıç açısından bitiş açısına döndürür.
- Ofsetle: Bir nesnenin bölümlerini belirli bir mesafeden ofsetler.
- Kırp/Uzat (Trimex): Bir nesneyi keser veya uzatır.
- Yükselt: Nesneleri daha yüksek seviyeli bir nesneye birleştirir.
- Düşür: Nesneleri daha düşük seviyeli nesnelere patlatır.
- Ölçekle: Seçili nesneleri temel bir noktaya göre ölçeklendirir.
- Düzenle: Seçilen bir nesneyi düzenler.
- Telden BSpline çevir: Bir teli B- Spline'a çevirir (veya tersi).
- Nokta ekle: Bir tele veya B-Spline'a bir nokta ekler.
- Nokta sil: Bir telden veya B-Spline'dan bir nokta siler.
- 2D görünüme çevir: Bir 3D nesnesinin düzleştirilmiş bir 2D görüntüsü olan bir 2D nesnesi oluşturur.
- Taslak/Eskiz çevir:Bir Taslak nesnesini Eskiz Tezgahı çizimine dönüştürür ve bunun tersi de geçerlidir.
- Dizi: Seçilen nesnelerden kutupsal veya dikdörtgen bir dizi oluşturur.
- Yol dizisi: Kopyaları yol boyunca yerleştirerek bir nesne dizisi oluşturur.
- Nokta dizisi: Kopyaları belirli noktalara yerleştirerek bir dizi nesne yaratır. 0.18 sürümünde kullanılabilir
- Klonla: Seçilen nesneleri klonlar.
- Çizim: Seçilen nesneleri Çizim Tezgahı sayfasına yazar.
- Yansıt: Seçilen nesneleri yansıtır.
- Uzat: Seçili nesneleri uzatır. 0.17 sürümünde kullanılabilir
- Clone: clones the selected objects.
- Array tools.
- Ortho Array: creates an orthogonal array from the selected object. It can also create App Link copies. introduced in version 0.19
- Polar Array: creates an array in a polar pattern, that is, sweeping an angle. It can also create App Link copies. introduced in version 0.19
- Circular Array: creates an array in a circular pattern, that is, starting from a center and moving outwards radially. It can also create App Link copies. introduced in version 0.19
- Path Array: creates an array of objects by placing the copies along a path.
- Path LinkArray: like Path Array, but creates App Links instead of regular copies. introduced in version 0.19
- Point Array: creates an array of objects by placing the copies at certain points. introduced in version 0.18
- Point LinkArray: like Point Array, but creates App Links instead of regular copies. introduced in version 0.19
- Edit: edits a selected object.
- Subelement highlight: enters an edit mode that allows editing different objects. introduced in version 0.19
- Join: joins lines together into a single wire. introduced in version 0.18
- Split: splits a wire into two at a point. introduced in version 0.18
- Upgrade: upgrades objects into a higher-level object.
- Downgrade: downgrades objects into lower-level objects.
- Wire to BSpline: converts a wire to a B-Spline and vice-versa.
- Draft to Sketch: converts a Draft object to a Sketcher Workbench Sketch and vice-versa.
- Slope: changes the elevation slope of the currently selected Draft Line or Draft Wire. introduced in version 0.17
- Flip Dimension: flips the orientation of the text of a Draft Dimension.
- Shape 2D View: creates a 2D object which is a flattened 2D view of a 3D object.
Obsolete
This command is considered obsolete because the Drawing Workbench is obsolete. However, the command itself is still available.
- Drawing: writes selected objects to a Drawing Workbench page. obsolete in version 0.17
These commands have been removed from the interface.
- Add point: adds a point to a wire or B-Spline. obsolete in version 0.19
- Delete point: deletes a point from a wire or B-Spline. obsolete in version 0.19
- Array: creates a polar or rectangular array from selected objects. obsolete in version 0.19
Draft Tray toolbar
The Draft tray toolbar appears when the workbench is started, and allows selecting the working plane, together with some visual properties like the line color, shape color, text size, line width, and automatic group.
- Working plane: sets a working plane from a standard view or a selected face.
- Construction mode: toggles the Draft construction mode on or off.
- Style settings: Set default styles for new objects, and applies the current style and color to selected objects.
- AutoGroup: automatically place new objects in a given Std Group, Draft Layer, or one of the group-like objects of the Arch Workbench, like Arch BuildingPart. introduced in version 0.17
Draft Snap toolbar
The Draft Snap toolbar allows selecting the currently snapping mode. Its button keep depressed when a mode is active.
- Toggle snap: toggles object snapping globally on or off.
- Endpoint: snaps to the endpoints of line, arc and spline segments.
- Midpoint: snaps to the middle point of line and arc segments.
- Center: snaps to the center point of circles, arcs and faces.
- Angle: snaps to the special cardinal points of circles and arcs, at 45° and 90°.
- Intersection: snaps to the intersection of two line or arc segments. Hover the mouse over the two desired objects to activate their intersection snaps.
- Perpendicular: on line and arc segments, snaps perpendicularly to the latest point.
- Extension: snaps on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap.
- Parallel: snaps on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap.
- Special: snaps on special points defined by the object. introduced in version 0.17
- Near: snaps to the closest point or edge on the nearest object.
- Ortho: snaps on imaginary lines that cross the last point, and extend at 0°, 45° and 90°.
- Grid: snaps to the intersections of the grid lines, if the grid is visible.
- Working plane: always places the snapped point on the current working plane, even if you snap to a point outside that working plane.
- Dimensions: shows temporary X and Y dimensions while snapping.
- Toggle grid: toggles the visibility of the grid on or off.
Yararlı ek araçlar
- Layer: creates a Layer in the current document, to which objects can be added to control object visibility and color. It replaces VisGroup. introduced in version 0.19
- Working Plane Proxy: create a proxy object to store the current Working Plane position. introduced in version 0.17
- Toggle display mode: switches the display mode of selected objects between "Flat Lines" and "Wireframe".
- Add to group: quickly adds selected objects to an existing Std Group or Draft VisGroup.
- Select group contents: selects the contents of a selected Std Group or Draft VisGroup.
- Add to Construction group: add selected objects to the Construction group. introduced in version 0.17
- Heal: heals problematic Draft objects found in very old files.
Seçilen nesneye bağlı olarak ek araçlar, Taslak → Araçlar yoluyla veya sağ tıklama menüsünden ulaşılabilir.
- Çalışma düzlemini ayarla: Çalışma düzlemini standart bir görünümden veya seçilen bir yüze ayarlar.
- Çizgiyi bitir: Mevcut tel veya B-spline çizgisini kapatmadan sonlandırır.
- Çizgiyi kapat: Mevcut tel veya B-spline çizgisini kapatıp sonlandırır.
- Çizgiyi geri al: Çizginin son kısmını geri alır.
- İnşaat modunu değiştir:Taslak inşaat modunu açar veya kapatır.
- Devam modunu değiştir: Taslak devam modunu açar veya kapatır.
- File:Draft ApplyStyle.png Stili uygula: Geçerli stili ve rengi seçili nesnelere uygular.
- Ekran modunu değiştir: Seçili nesnelerin ekran modunu "Düz Hatlar" ve "Tel Kafes" arasında değiştirir.
- Gruba ekle: Seçilen nesneyi varolan bir gruba ekler.
- Grup içeriğini seç: Seçili bir grubun içeriğini seçer.
- File:Draft ToggleSnap.png Yakalama aç/kapa:Nesnenin Nesne yakalamayı açar veya kapatır.
- File:Draft ToggleGrid.png Izgarayı aç/kapa:Izgaranın görünürlüğünü açar veya kapatır.
- File:Draft ShowSnapBar.png Yakalama çubuğunu göster: Yakalama araç çubuğunu gösterir veya gizler.
- İyileştirme: Çok eski dosyalarda bulunan sorunlu Taslak nesnelerini iyileştirir.
- Boyutu çevir:Boyut metninin yönünü çevirir .
- File:Draft VisGroup.png VisGroup: Geçerli belgede bir VisGroup oluşturur.
- File:Draft Slope.png Eğim ver: Seçili olan Taslak Çizgisi veya Taslak Kablosunun yükselme eğimini değiştirir. 0.17 sürümünde kullanılabilir
- Otomatik grup: Yeni nesneleri belirli bir gruba otomatik olarak yerleştirir.
- File:Draft SetWorkingPlaneProxy.png Set Working Plane Proxy: Geçerli Çalışma düzlemi konumunu depolamak için bir proxy nesnesi ekler.0.17 sürümünde kullanılabilir
- İnşaat grubuna ekle: Seçili nesneyi inşaat grubuna ekler.0.17 sürümünde kullanılabilir
Obsolete
These tools were removed from the interface in v0.19 because they no longer had any purpose.
- VisGroup: creates a VisGroup in the current document. This was replaced by Layer. obsolete in version 0.19
- Finish line: ends the drawing of the current Draft Wire or Draft BSpline, without closing it. obsolete in version 0.19
- Close line: ends the drawing of the current Draft Wire or Draft BSpline, and closes it. obsolete in version 0.19
- Undo line: undoes the last segment of a Draft Wire. obsolete in version 0.19
Seçenekler
- Seçenekler...: Çalışma düzlemi ve çizim araçları için genel tercihler.
- İçe/Dışa aktar Seçenekleri: Farklı dosya biçimlerinden içe ve dışa aktarma için mevcut seçenekler.
Dosya formatları
Taslak modül, FreeCAD'e aşağıdaki dosya formatları için içe aktarıcı ve dışa aktarıcı sağlar:
- Autodesk .DXF: 2D CAD uygulamaları ile oluşturulan Drawing Exchange Format dosyalarını içe/dışa aktarır. Ayrıca bakınız FreeCAD ve DXF içe aktarma.
- Autodesk .DWG: ODA Dönüştürücüsü yardımcı programı yüklendiğinde, DWG dosyalarını DXF içe aktarıcısı aracılığıyla alır ve verir. Ayrıca bakınız FreeCAD ve DWG Alma.
- SVG: vektör çizim uygulamaları ile oluşturulan Ölçeklenebilir Vektör Grafikleri dosyalarını içeri ve dışarı aktarır.
- Open Cad formatı .OCA: potansiyel olarak yeni bir CAD dosyası formatı OCA / GCAD dosyalarını içe ve dışa aktarır.
- Airfoil Data Format .DAT: Airfoil profilleri 'nı açıklayan DAT dosyalarını içe aktarır.
Install importers
- FreeCAD and DWG Import: Imports and exports DWG files
- FreeCAD and DXF Import: Imports and exports DXF files
Ek özellikler
- Koordinatlar: Yeni bir nokta tanımlamak için 3B görünüme tıklamak yerine koordinatları girer.
- Constraining: imleci bir önceki noktaya göre yatay veya dikey hareketlerle sınırlandırır.
- Yakalama: Mevcut nesnelerdeki veya ızgaradaki özel yerlere yeni noktalar yerleştirir.
Unit tests
See also: Test Workbench.
To run the unit tests of the workbench execute the following from the operating system terminal.
freecad -t TestDraft
Betik
Taslak modulu Taslak API kullanarak, Python konsolunda ve makrolar da kullanabilirsiniz.
The workbench includes a module to create samples of all objects in a new document. introduced in version 0.19
Use this to test that all objects are produced correctly.
import drafttests.draft_test_objects as dto
doc = dto.create_test_file()
Inspecting the code of this module is useful to understand how to use the programming interface.
$INSTALLDIR/Mod/Draft/drafttests/draft_test_objects.py
Where $INSTALLDIR
is the toplevel directory where the software was installed; for example, in Linux it may be /usr/share/freecad
.
Test objects for the Draft Workbench.
Kılavuzlar
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub