Draft Snap Dimensions/fr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 2: Line 2:
{{Template:UnfinishedDocu/fr}}
{{Template:UnfinishedDocu/fr}}


===Description===
{{GuiCommand/fr|Name=Draft Dimensions|Name/fr=Draft Dimensions|Workbenches=[[Draft Module/fr|Draft]], [[Arch Module/fr|Arch]]|MenuLocation=Draft → [[Draft Snap/fr|Snap]] → Dimensions|Shortcut=|SeeAlso=}}
Lets you snap to one of the three lines making up the draft dimension




===Use===
[[Category:UnfinishedDocu/fr]]
#Make sure snap mode is turned on
#Choose element (for example draft line) to be inserted into the FreeCAD-document
#Move cursor near draft dimension of the element you wish to attach your element to
#below on the right side of the cursor the symbol of the snap mode will appear
#click to attach your element to the selected line of the draft dimension of the target element





Revision as of 19:56, 21 March 2016

Cette documentation n'est pas terminée. Merci de nous aider et de contribuer à la documentation.

Modèle GuiCommand explique comment les commandes doivent être documentées. Parcourez Category:UnfinishedDocu pour voir d'autres pages incomplètes comme celle-ci. Voir Category:Command_Reference pour toutes les commandes.

Voir Écrire une page Wiki pour apprendre à éditer les pages du wiki, et aller à Contribuer à FreeCAD pour apprendre d'autres façons de contribuer.

Description

Lets you snap to one of the three lines making up the draft dimension


Use

  1. Make sure snap mode is turned on
  2. Choose element (for example draft line) to be inserted into the FreeCAD-document
  3. Move cursor near draft dimension of the element you wish to attach your element to
  4. below on the right side of the cursor the symbol of the snap mode will appear
  5. click to attach your element to the selected line of the draft dimension of the target element


Notes